Key facts
- Brand
- Danfoss
- Model
- FC 51
- Category
- inverter
- Industry
- Industrial
- Documents
- 3
- Languages
- ZH · ES · TR
- Last added
- 2026-11-14
Start here

Danfoss VLT Micro FC 51 VFD Quick Start Guide
This document serves as a quick start guide for the Danfoss VLT Micro FC 51 frequency converter, intended for qualified personnel. It covers essential topics including safety warnings, installation procedures, mechanical dimensions, power and control connections, and basic programming concepts. The guide also includes a summary of parameters and troubleshooting tips to assist with initial setup and operation. This manual is written in Spanish.
Read onlineDanfoss FC 51 specifications
| Ground leakage current | Greater than 3.5 mA |
|---|---|
| Wait time before touching | At least 4 minutes |
| RCD type | Class B (delayed) |
| IT mains maximum supply voltage | 440 V |
| Altitude installation | Consult Danfoss Drives above 2 km |
| Low-speed load compensation range | 0-199 % |
| High-speed load compensation range | 0-199 % |
| Slip compensation range | -400 to 399 % |
| Slip compensation time | 0.05-5.00 s (default 0.10 s) |
All Danfoss FC 51 documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
The shortest path to a working setup, usually only a few pages.
Questions answered in these manuals
How long should I wait before touching VLT Micro Drive parts?
Wait at least 4 minutes for all ratings.
What RCD type can be used at the input?
Only a class B (delayed) RCD can be used.
What is the maximum input voltage for IT (isolated) power supplies?
The maximum allowed input voltage is 440 V.
Is the [Off/Reset] key a safety switch?
No, the [Off/Reset] key is not a safety switch and does not disconnect the converter from the mains.
What cable sizes are recommended for connecting the drive to the motor?
Use cables up to 4 mm² (10 AWG) for frames M1‑M3 and up to 16 mm² (6 AWG) for frames M4‑M5.
