Key facts
- Brand
- Danfoss
- Model
- RET2000 B
- Category
- Other Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2023-11-03
Start here

Danfoss RET2000 B/M/MS Electronic Digital Thermostat Installation Guide
This document is an installation guide for the Danfoss RET2000 B/M/MS electronic digital thermostat with LCD. It covers specifications, ErP classification, mounting, wiring, and DIL switch settings for heating or cooling operation.
The guide also describes advanced programming options such as temperature limits and setpoint opening temperature, along with locking and limiting functions.
Danfoss RET2000 B specifications
| Operating voltage | 230Vac ±15%, 50/60Hz; 2.5-3 VDC (2xAA batteries) |
|---|---|
| Output | 230Vac / Volt free |
| Setting temperature range | 5-30°C (cooling 16-36°C) |
| Switch rating | 3A (1) at 230Vac |
| Switch type | 1 x SPDT Type 1B |
| Battery lifetime | N/A; Min. 2 years |
| IP rating | IP20 |
| Operating modes | Heating/Cooling selectable |
| Dimensions | H84 x W84 x D35 mm |
| ERP class | IV |
Source: Danfoss RET2000 B/M/MS Electronic Digital Thermostat Installation Guide
All Danfoss RET2000 B documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the IP rating of the RET2000?
The IP rating is IP20.
From: Danfoss RET2000 B/M/MS Electronic Digital Thermostat Installation Guide
What temperature range can be set?
The setting temperature range is 5-30°C, or 16-36°C in cooling mode.
From: Danfoss RET2000 B/M/MS Electronic Digital Thermostat Installation Guide
What is the operating voltage for the RET2000MS thermostat?
The RET2000MS operates on 230Vac ±15%, 50/60Hz.
From: Danfoss RET2000B/M/MS Electronic Digital Thermostat with LCD Installation Guide
What is the switch rating for the RET2000 series?
The switch rating is 3A (1) at 230Vac.
From: Danfoss RET2000B/M/MS Electronic Digital Thermostat with LCD Installation Guide
