Key facts
- Brand
- Danfoss
- Model
- ERC 112
- Category
- Other Electronics
- Industry
- Electronics
- Documents
- 2
- Languages
- EN
- Last added
- 2026-11-09
Start here

Danfoss ERC 112 Refrigeration Controller User Manual
The ERC 112 is an electronic refrigeration controller designed primarily for bottle coolers and commercial refrigeration appliances. It features a versatile software with three separate password-protected user levels (Shop, Technician, OEM) to control over 300 parameters. The device supports various sensor types including NTC, Pt 1000, and door/motion sensors, and is available with red or blue LED displays.
Read onlineDanfoss ERC 112 specifications
| Power supply | 100 - 240 V AC |
|---|---|
| Average power consumption | 0.7 W |
| Inputs | 5 inputs: 4 analogue (digital), 1 digital |
| Compressor relay output | 120 V AC: 16 A resistive/FLA16/LRA72; 240 V AC: 10 A resistive/FLA10/LRA60 |
| Maximum total output for DO4-6 | Max 10 A total |
| Display | LED display, 3 digit |
| Keypad | 4 buttons, 2 left and 2 right |
| Operating conditions | 0 °C to 55 °C, 93% rH |
| Storage conditions | -40 °C to 85 °C, 93% rH |
| Measurement range | -40 °C to 85 °C with standard sensors |
| Front protection | IP65 |
| Rear protection | Water and dust protection corresponds to IP31; connector accessibility limits rear rating to IP00 |
| Operating cycles | More than 175,000 at full load |
Source: Danfoss ERC 112 Electronic Refrigeration Controller User Guide
All Danfoss ERC 112 documents by type
Instruction set, parameters and examples for configuring or programming the device.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What is the Danfoss ERC 112 used for?
It is an electronic refrigeration controller with an LED display developed for bottle coolers and commercial fridges and freezers.
From: Danfoss ERC 112 Electronic Refrigeration Controller User Guide
Who is this ERC 112 guide intended for?
It is intended for OEMs for programming the ERC 112 and may also be useful for technicians, but it is not intended as a guide for end users.
From: Danfoss ERC 112 Electronic Refrigeration Controller User Guide
Who is this manual intended for?
This reference manual is intended to be used primarily by OEMs for the purpose of programming ERC 112. It may also be useful for technicians.
What are the three password-protected user levels?
The three levels are level 1 for shop access, level 2 for technicians, and level 3 for OEMs.
