Key facts
Start here
Bosch HydroPower 10H/13H/16H Installation & Owner’s Guide
This guide covers the installation requirements, basic steps, and wiring for the Bosch HydroPower external models (10H, 13H, 16H). It includes specifications, water flow adjustments, and troubleshooting tips to ensure proper commissioning by an authorised installer.
The manual also details operating instructions, routine care, servicing intervals, and warranty conditions for both domestic and commercial applications, along with environmental information about Bosch’s sustainability commitments.
Bosch 10H specifications
| Inlet Gas Pressure (NG) | 1.13 kPa |
|---|---|
| Inlet Gas Pressure (LPG) | 2.75 kPa |
| Burner Gas Pressure (NG) | 0.89 kPa |
| Burner Gas Pressure (LPG) | 2.60 kPa |
| Minimum Water Flow Rate | 3.2 L/min |
| Recommended Fixture Flow Rate | ≥7.5 L/min |
| Maximum Water Flow at 50 °C Rise | 5–8 L/min (model dependent) |
Source: Bosch HydroPower 10H/13H/16H Installation & Owner’s Guide
All Bosch 10H documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the minimum water flow rate required for the HydroPower heater to operate?
The heater requires a water flow rate of at least 3.2 litres per minute to operate.
From: Bosch HydroPower 10H/13H/16H Installation & Owner’s Guide
How do you turn the appliance on and off?
Turn the on/off switch to position “1” to start the appliance and to position “0” to shut it off.
From: Bosch HydroPower 10H/13H/16H Installation & Owner’s Guide
Can the HydroPower water heater be installed indoors?
No, the appliance is approved for outdoor installation only.
From: Bosch HydroPower 10H, 13H, 16H Installation & Owner’s Guide
What is the minimum water flow rate required for operation?
The unit requires a minimum water flow rate of 3.5 litres per minute.
From: Bosch HydroPower 10H, 13H, 16H Installation & Owner’s Guide
How many indoor units can be connected to a single system?
The system can be expanded to a maximum of four indoor units and two resident door units.
From: Philips HC-3210/HC-3220 Non-visual Indoor Unit User Manual
What power supply voltage is required for the indoor unit?
The unit requires a DC15 V power supply with a tolerance of ±10 %.
From: Philips HC-3210/HC-3220 Non-visual Indoor Unit User Manual