SGS-THOMSON Manuals

IMSA110 is a 1-D/2-D software configurable convolution/filter. It has the following features: programmable line delays, 8-BIT data and 8.5-BIT coefficient slices, 21 multiply-and-accumulate stages, 1-D (21) or 2-D (3 x 7) convolution window, data transformation post processor, fully cascadable in window size and accuracy, 20 MHZ data throughput (420 MOPS), signed/unsigned data and coefficients, microprocessor interface, high speed CMOS implementation, TTL compatible, single +5V ± 10% supply, power dissipation <2.0 watts, 100 pin ceramic PGA.

M54/74HCT02 is a high performance, low power CMOS quad 2-input NOR gate with fully compatible with 54/74 LSTTL logic family

M54HC02 M74HC02 is a high performance CMOS four-input NOR gate with a working voltage range of 2V to 6V, low power consumption, high noise immunity and stable output.

The OP07C is a very high precision op amp with an offset voltage maximum of 150µV. Offering also low input current (1.8nA) and high gain (400V/mV), the OP07C is particularly suitable for instrumentation applications.

VIPer31SP is a primary IC for battery chargers, with a 600V/1A rated voltage and current. It integrates a PWM controller and MOSFET, and supports constant current and constant voltage output. It also supports soft start and shut down control, as well as automatic burst mode operation, meeting the 'Blue Angel' standard (total power consumption less than 1W).

VIPer31SP is an IC chip that combines PWM control and high-voltage power MOSFET. Its features include output current regulation, fixed switching frequency, auxiliary voltage regulation, soft start and shutdown control, automatic burst mode operation, etc.

The L7800 series of positive voltage regulators features high output current and multiple output voltage options, making it suitable for a wide range of applications. They have internal current limiting, thermal shutdown, and safe area protection, making them essentially indestructible. They can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Additionally, they can be used with external components to achieve adjustable voltages and currents.

The L7800 series of positive voltage regulators has an output current of up to 1.5A and output voltages of 5V, 5.2V, 6V, 8V, 8.5V, 9V, 12V, 15V, 18V, and 24V. It features thermal overload protection, short circuit protection, and output transition safe area protection.

TIP130/131/132 TIP135/136/137 are silicon epitaxial-base NPN power transistors in monolithic Darlington configuration, mounted in Jedec TO-220 plastic package. They are intented for use in power linear and switching applications. The complementary PNP types are TIP135, TIP136 and TIP137.

STP7NA40 / STP7NA40FI N-channel enhancement mode fast power MOS transistor features typical RDS(on) = 0.82 ohm, ±30V gate to source voltage rating, 100% avalanche tested, repetitive avalanche data at 100oC, low intrinsic capacitances, minimized gate charge and reduced threshold voltage spread.

STP7NA40STP7NA40FI is a fast power MOSFET produced by Dinghao Semiconductor. The typical RDS(on) is 0.82 ohms, the ±30V gate-source voltage rating, 100% avalanche tested, repetitive avalanche data at 100oC, low intrinsic capacitances, minimized gate charge, and reduced threshold voltage spread. Applications include high current, high speed switching, switch mode power supplies (SMPS), welding equipment and uninterruptible power supplies and motor drives.

STP7NA60 is a high voltage power MOSFET produced by Dinghao Technology. Its features are low on-resistance, high switching speed, and is suitable for high current and high frequency switching applications.

STP7NA60 is an N-channel enhancement mode fast power MOS transistor with low on-resistance and gate charge, superior reliability, and switching performance.

STP7NB40 is a N-channel enhancement mode power MOSFET produced by Philips company, it has the lowest RDS(on) of 0.75 ohms, extremely high dv/dt capability, 100% avalanche tested, very low intrinsic capacitances, minimized gate charge. The product is mainly used in high current, high speed switching, switch mode power supplies (SMPS), inverters and other fields