SGS-THOMSON Manuals - Page 7

SGS-THOMSON manuals, page 7

• SGS-THOMSON BTW 68(N)handbook

  This document describes the features and characteristics of the BTW 68 (N) series Silicon Controlled Rectifiers from Dinghao, including high surge capability, high on-state current, high stability and reliability. This series of Silicon Controlled Rectifiers uses high-performance glass passivated technology and is designed for power supplies up to 400Hz on resistive or inductive load.

• SGS-THOMSON BTW 68 (N) Data Sheet

  This document describes the parameters and characteristics of the BTW 68 (N) series silicon controlled rectifiers, including maximum current, maximum temperature range, and maximum voltage rating. This series of products features high surge capability, high stability, and reliability. It is suitable for power supplies with a frequency of up to 400Hz and resistive or inductive loads.

• SGS-THOMSON TDA2040 Manual(1)

  TDA2040 is a 20W power audio amplifier that includes short circuit protection and thermal shutdown systems, and has an output power of up to 22W with very low harmonic and crossover distortion.

• SGS-THOMSON TDA2040 Manual

  TDA2040 is a monolithic integrated circuit in Pentawatt package, intended for use as an audio class AB amplifier. It provides high output current and has very low harmonic and cross-over distortion. The device also incorporates a patented short circuit protection system and thermal shut-down system.

• SGS-THOMSON TDA2030 Manual

  The TDA2030 is a monolithic integrated circuit designed for low-frequency class AB amplification. It provides 14W output power with low harmonic and crossover distortion. It also features short circuit protection and thermal shutdown.

• SGS-THOMSON TDA2030A Manual

  TDA2030A is a monolithic IC intended for use as a low frequency class AB amplifier. It provides high output current and has very low harmonic and cross-over distortion. The device also incorporates a short circuit protection system and a thermal shut-down system.

• SGS-THOMSON TDA2030A Guide

  The TDA2030A is a 18W Hi-Fi amplifier and 35W driver, suitable for low frequency class AB amplifier. It provides high output current and very low harmonic and cross-over distortion. It also has a short circuit protection system, which includes an arrangement for automatically limiting the dissipated power so as to keep the working point of the output transistors within their safe operating area. A conventional thermal shut-down system is also included.

• SGS-THOMSON L7800 SERIES Data Sheet

  The L7800 series of three-terminal positive regulators is available in TO-220 ISOWATT220 TO-3 and D2PAK packages and several fixed output voltages, making it useful in a wide range of applications.Theseregulators can provide local on-card regulation, eliminating the distribution problems associated with single point regulation. Each type employs internal current limiting, thermal shut-down and safe area protection, making it essentially indestructible. If adequate heat sinking is provided, they can deliver over 1A output current. Although designed primarily as fixed voltage regulators, these devices can be used with external components to obtain adjustablevoltages and currents.

• SGS-THOMSON L6570A L6570B Data Sheet

  This document is an introduction to the ICminer.com Electronic-Library Service provided by Dinghao, which offers real-time inventory, technical data, encyclopedia information, and hot news.

• SGS-THOMSON STP6NA80 STP6NA80FI Manual

  STP6NA80 is a STMicroelectronics N-channel enhancement mode fast power MOS transistor, its typical RDS(on) is 1.68 ohm, gate to source voltage rating is ±30V, 100% avalanche tested, repetitive avalanche data at 100oC, low intrinsic capacitances, gate charge minimized, reduced threshold voltage spread.

• SGS-THOMSON STP6NA60FP Manual(1)

  STP6NA60FP is an N-channel enhancement mode fast power MOS transistor with features such as low RDS(on), low intrinsic capacitances, minimized gate charge, and reduced threshold voltage spread. It is suitable for high current, high speed switching, switch mode power supplies, DC-AC converters, and applications in welding equipment, uninterruptible power supplies, and motor drive.

• SGS-THOMSON STP6NA60FP Manual(1)(1)

  STP6NA60FP N - CHANNEL ENHANCEMENT MODE FAST POWER MOS TRANSISTOR is a high voltage power MOSFET with low RDS(on) and gate charge. It is suitable for high current, high speed switching applications.

• SGS-THOMSON STP6NA60 STP6NA60FI Manual

  stp6na60 is a mosfet from dinghao. it has low on-resistance, low gate charge and superior switching performance. it is suitable for high current, high frequency switching applications such as switch mode power supplies and inverters.

• SGS-THOMSON STP6N60FI Manual(1)

  STP6N60FI is a power MOS transistor with N-channel enhancement mode, typical RDS(on) = 1Ω, 100% avalanche tested, suitable for high current, high-speed switching applications.

• SGS-THOMSON STP6N60FI Manual(1)(1)

  This document describes the features and characteristics of the STP6N60FI N-channel enhancement mode power MOS transistor, including low on-resistance, high voltage withstand, high-speed switching, and reliability testing. It is suitable for high current, high-speed switching applications such as switch mode power supplies, chopper regulators, converters, motor control, and lighting for industrial and consumer environments.