Key facts
Start here
Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual(1)
This document provides installation instructions and safety warnings for TCI KLR and KDR line reactors. It covers general safety precautions, such as disconnecting power before working on equipment and ensuring proper grounding. It also details specific recommendations for installing these reactors on the input side of a Variable Frequency Drive (VFD).
Read onlinePanasonic PT-DW5000UL specifications
| Voltage Class | 600 Volt Class |
|---|---|
| Phase Type | 3-Phase |
| Ambient Temperature | 40° C |
| Current Rating | 200% rated current for 3 minutes |
| Certifications | UL Recognized, CE Marked, CSA Approved |
Source: Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual(1)
All Panasonic PT-DW5000UL documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the recommended impedance for TCI reactors on the VFD output?
TCI recommends 1.5% impedance reactors to be used on the output of the VFD.
From: Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual(1)
How close should the reactor be mounted to the VFD?
Reactors should be mounted as close to the output terminals of the VFD as possible.
From: Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual(1)
What safety steps must be taken before working on the reactor?
Disconnect all power before working on the equipment and ensure only qualified electricians perform the installation.
From: Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual
How close should the reactor be installed to the VFD?
The reactor should be located as close to the drive as possible, preferably within 10 feet of cable length.
From: Panasonic PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Manual