Philips manuals, page 95
philips SAA7182 SAA7183 Digital Video Encoder handbook
The SAA7182 and SAA7183 are digital video encoder chips produced by Philips Semiconductors. They support PAL/NTSC/SECAM formats and can accept MPEG decoded data on an 8-bit wide input port. They support CVBS, Y, C, and RGB outputs.
PHILIPS PZM-NA series handbook
This document describes the features and characteristics of the PZM-NA series voltage regulator double diodes, including the maximum power dissipation per diode, small plastic package suitable for surface mounted design, and working voltage range.
PHILIPS PUMH2 handbook
The document describes the features and characteristics of the PUMH2 NPN resistor-equipped double transistor, including built-in bias resistors, no mutual interference, simplification of circuit design, and reduction of components and board space. It is especially suitable for space reduction in interface and driver circuits, as well as inverter circuit configurations without the use of external resistors.
PHILIPS PESD5V0S1BA; PESD5V0S1BB; PESD5V0S1BL handbook
PESD5V0S1BA/BB/BL is a low capacitance bidirectional ESD protection diode from Philips. It is designed in ultra small SMD plastic packages and can protect one signal line from ESD and other transients.
PHILIPS 89C51RB2/89C51RC2/89C51RD2 handbook
This product is a 80C51 8-bit Flash microcontroller family produced by Philips Semiconductors with 16KB/32KB/64KB ISP/IAP Flash and 512B/512B/1KB RAM
PHILIPS UDA1321 handbook
This document is a specification sheet for UDA1321, which introduces product features
PHILIPS TEA1112; TEA1112A Low voltage versatile telephone transmission circuits with dialler interface Data Sheet
TEA1112; TEA1112A are low voltage versatile telephone transmission circuits with dialler interfaces. They have low DC line voltage, operating down to 1.6 V; voltage regulator with adjustable DC voltage providing a supply for external circuits; symmetrical high impedance inputs (64 kΩ) for dynamic, magnetic or piezo-electric microphones; asymmetrical high impedance input (32 kΩ) for electret microphones; DTMF input with confidence tone; mute input for pulse or DTMF dialling; receiving amplifier for dynamic, magnetic or piezo-electric earpieces; AGC line loss compensation for microphone and earpiece amplifiers; LED on-hook/off-hook status indication; microphone mute function.
PHILIPS 83C654 handbook
The 83C654 is a single-chip 8-bit microcontroller manufactured by Philips Semiconductors. It has the same function as 80C51 and can be expanded using standard TTL compatible memories and logic.
Philips Semiconductors BT139 series Data Sheet
PHILIPS TDA8574 Class-H high-output voltage level line driver handbook
The TDA8574 is a two channel class-H high-output voltage line driver for use in car audio applications. It features output voltage swing larger than supply voltage, high supply voltage ripple rejection, low distortion, low noise, and ESD protection on all pins.
PHILIPS 74LV541 Octal buffer/line driver (3-State) handbook
The 74LV541 is a low-voltage CMOS device and is pin and function compatible with 74HC/HCT541. The 74LV541 is an octal non-inverting buffer/line driver with 3-state outputs. The 3-State outputs are controlled by the output enable inputs OE1 and OE2. A HIGH on OEn causes the outputs to assume a high impedance OFF state.
PHILIPS 74LV125 Quad buffer/line driver (3-State) handbook
The 74LV125 is a low-voltage silicon-gate CMOS device and is pin and function compatible with 74HC/HCT125. The 74LV125 consists of four non-inverting buffers/line drivers with 3-state outputs. The 3-state outputs (nY) are controlled by the output enable input (nOE). A HIGH at nOE causes the outputs to assume a high impedance OFF-state.
PHILIPS 74HC00; 74HCT00 Quad 2-input NAND gate handbook
This document describes the integrated circuit products of the 74HC00 and 74HCT00 models. They are high-speed Si-gate CMOS devices with quad 2-input NAND function. They comply with JEDEC standards and have ESD protection. The product specifications range from -40 to +85°C and -40 to +125°C.
PHILIPS TDA8000; TDA8000T Smart card interface handbook
TDA8000/TDA8000T is a smart card interface chip produced by Philips company, which has VCC voltage regulation, VPP voltage generation, clock generation, short-circuit, thermal and card extraction protection, two voltage supervisors, automatic activation and deactivation sequence, and enhanced ESD protection. Suitable for banking, telecommunications and pay TV applications.
PHILIPS BZW03 series Voltage regulator diodes Data Sheet
This document describes the features and characteristics of the BZW03 series voltage regulator diodes, including glass passivated, high maximum operating temperature, low leakage current, excellent stability, etc.
