Philips Manuals - Page 94

Philips manuals, page 94

• PHILIPS GTL2020/GTL2021/GTL2022/GTL2023 32-bit GTL terminator with octal enables handbook

  GTL2020/GTL2021/GTL2022/GTL2023 32-bit GTL terminator with octal enables is a low power, high speed and high reliability GTL bus terminator. Features include: 56 Ω, 75 Ω, 100 Ω, 150 Ω four resistance options, 5 ns switching speed, 3 pF channel capacitance, +5 V ±10% operating voltage range, meet Class II JESD78 latch-up protection standard, and pass 2000 V HBM, 200 V MM, 1000 V CDM ESD protection test. The device uses TSSOP56 package.

• PHILIPS BZX284 series Voltage regulator diodes handbook

  This document describes the features and characteristics of the BZX284 series voltage regulator diodes, including total power dissipation, tolerance range, and working voltage range.

• PHILIPS P89C51X2/52X2/54X2/58X2 80C51 8-bit Flash microcontroller family 4K/8K/16K/32K Flash 128B/256B RAM datasheet

  This data sheet describes the Philips P89C51X2/52X2/54X2/58X2 family of 80C51 8-bit Flash microcontrollers, which have 4K/8K/16K/32K of Flash and 128B/256B of RAM.

• PHILIPS MX0912B100Y; MZ0912B100Y NPN microwave power transistors handbook

  MX0912B100Y and MZ0912B100Y are NPN microwave power transistors produced by Philips. They feature high emitter efficiency, excellent current sharing capability, high VSWR, stable characteristics and excellent service life.

• PHILIPS TZA3000 SDH/SONET STM4/OC12 optical receiver handbook

  TZA3000 is an SDH/SONET STM4/OC12 optical receiver with features such as low equivalent input noise, wide dynamic range, on-chip low-pass filter, differential transimpedance, automatic gain control, data output compatibility, LOS detection, etc.

• PHILIPS SZF2002 handbook

• Philips Semiconductors PSMN004-25B PSMN004-25P Data sheet

  PSMN004-25B, PSMN004-25P is a N-channel logic level TrenchMOS transistor from Philips Semiconductors that uses the latest Trench technology to achieve the lowest possible on-state resistance in each package at each voltage rating. It is suitable for applications such as dc to dc converters and switched mode power supplies

• PHILIPS BZX84 series Voltage regulator diodes Data Sheet

  BZX84 series is a low-power voltage regulator diode released by Philips Semiconductors. It is packaged in a small SOT23 plastic SMD package and has a maximum total power dissipation of 250 mW. The diodes are available in the normalized E24 ±1% (BZX84-A), ±2% (BZX84-B) and approx. ±5% (BZX84-C) tolerance range. The series consists of 37 types with nominal working voltages from 2.4 to 75 V. It is suitable for general regulation functions.

• Philips Semiconductors BT131 series datasheet

  This document is the product specification of Philips Semiconductors Triacs BT131 series, including the maximum repetitive peak off-state voltage, RMS on-state current, non-repetitive peak on-state current and other information.

• Philips Components SFR16S/25/25H handbook

  This product is a SFR16S/25/25H series standard metal film resistor, which features low cost, low noise and small size (SFR16S). It is used for general purpose resistors.

• PHILIPS 74LVC162373A; 74LVCH162373A 16-bit D-type transparent latch; 30 series termination resistors; 5 V tolerant inputs/outputs; 3-state handbook

  74LVC162373A and 74LVCH162373A are 16-bit D-type transparent latches featuring separate D-type inputs for each latch and 3-state outputs for bus oriented applications.

• PHILIPS 74HC/HCT374 Octal D-type flip-flop; positive edge-trigger; 3-state Data Sheet

  The 74HC/HCT374 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.

• philips Semiconductors LM111/211/311/ LM311B Data Sheet

  The LM111/211/311/LM311B are low-power precision voltage comparators from Philips Semiconductors. They feature input currents approximately 100 times lower than the µA710 and can operate from a single 3V supply. Their output is compatible with RTL, DTL, and TTL as well as MOS circuits. They can also drive lamps or relays, switching voltages up to 50V at currents as high as 50mA. Both the inputs and the outputs of the LM111 series can be isolated from system ground, and the output can drive loads referred to ground, the positive supply, or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire-ORed.

• PHILIPS HEF4085B gates Dual 2-wide 2-input AND-OR-invert gate handbook

  This data sheet introduces the Philips Semiconductors HEF4085B dual 2-wide 2-input AND-OR-invert gate's functions, features and specifications.

• PHILIPS HEF40098B buffers 3-state hex inverting buffer handbook

  HEF40098B is a 6-channel inverting buffer with 3 operating states, which are controlled by the EO4 and EO2 enable pins.

Philips manuals by category