Philips manuals, page 98
PHILIPS 74F269 DATA SHEET
The 74F269 is an 8-bit bidirectional binary counter manufactured by Philips Semiconductors. It features synchronous counting and loading, built-in look-ahead carry capability, a typical count frequency of 115MHz, and a typical supply current of 95mA.
PHILIPS 83C752/87C752 DATA SHEET
This document is about the specification of Philips 83C752/87C752 80C51 8-bit microcontroller. The microcontroller has a 2k × 8 ROM (83C752) EPROM (87C752), a 64 × 8 RAM, 21 I/O lines, a 16-bit auto-reload counter/timer, a fixed-priority level interrupt structure, a bidirectional inter-integrated circuit (I2C) serial bus interface, an on-chip oscillator, a five channel multiplexed 8-bit A/D converter and an 8-bit PWM output.
Philips Semiconductors 74ABT5074 Data Sheet
Philips Semiconductors PHE13002AU handbook
The PHE13002AU is a high-voltage, high-speed planar-passivated npn power switching transistor in the SOT533 envelope intended for use in high frequency electronic lighting ballast applications, converters and inverters, etc.
PHILIPS PDTC123ET NPN resistor-equipped transistor handbook
This document describes the features and characteristics of the PDTC123ET NPN resistor-equipped transistor, including built-in bias resistors, simplified circuit design, and reduction of components and board space. It is especially suitable for space reduction in interface and driver circuits, and inverter circuit configurations without the use of external resistors.
Philips Semiconductors BUK436W-200A/B handbook
BUK436W-200A/B is a power MOS transistor widely used in applications such as switched mode power supplies, motor control, welding, DC/DC and AC/DC converters. It features a drain-source voltage of 200V, a drain current of 19A, a total power dissipation of 125W, and a drain-source on-state resistance of 0.16-0.2Ω.
Philips Semiconductors BU4508DX handbook
This document describes the BU4508DX silicon diffused power transistor from Philips Semiconductors. It is a new generation, high-voltage, high-speed switching npn transistor with an integrated damper diode. The product is intended for use in horizontal deflection circuits of color television receivers and features exceptional tolerance to base drive and collector current load variations, resulting in a very low worst case dissipation.
Philips Semiconductors BT139X series handbook(1)(1)
This document describes the features and characteristics of Philips Semiconductors BT139X series triacs, which are intended for applications requiring high bidirectional transient and blocking voltage capability, as well as high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating, and static switching.
Philips Semiconductors BT139X series handbook(1)
This document is Philips Semiconductors' product specification for BT139 series triacs. BT139 series triacs are glass passivated triacs in a plastic envelope, intended for use in applications requiring high bidirectional transient and blocking voltage capability and high thermal cycling performance. Typical applications include motor control, industrial and domestic lighting, heating and static switching.
PHILIPS SAB9075H Picture-in-Picture (PIP) controller for NTSC handbook
The SAB9075H is a Picture-in-Picture (PIP) controller for NTSC. It can display one or two live pictures simultaneously, with a wide range of multi-PIP modes available. It features six 6-bit Analog-to-Digital Converters (ADC) with clamping circuit, enhanced vertical resolution at most modes for live pictures, and two Phase-Locked-Loops (PLL) with Voltage Controlled Oscillator (VCO) to generate the line-locked clocks. It also includes three 7-bit Digital-to-Analog Converters (DAC) and supports a 4:1:1 data format. The controller is I2C-bus programmable, allowing for different single, double, and multi-PIP modes to be set. It can handle several aspect ratios and supports automatic and manual data reduction factors. Users can select the vertical filtering type, freeze live pictures, and adjust the display position and acquisition area. The controller supports single-PIP display position in the four corners of the screen, and multi-PIP display position on the left or right. Fine-tuned display position and acquisition area can be adjusted. Users can also select various border and background colors, as well as adjust the border and background brightness. The controller supports multiple types of decoder inputs.
PHILIPS SAA7128AH; SAA7129AH Digital video encoder handbook
Introduces the features and characteristics of PHILIPS SAA7128AH/SAA7129AH digital video encoder products
PHILIPS PCF2116 family LCD controller/drivers datasheet
This document is a product specification for the PCF2116 family LCD controller/drivers, providing information on the features and applications of the product.
PHILIPS 80C31/80C51/87C51 CMOS single-chip 8-bit microcontrollers handbook
80C31/80C51/87C51 is a high-performance CMOS single-chip 8-bit microcontroller fabricated with Philips high-density CMOS technology. It is functionally compatible with the NMOS 8031/8051 microcontrollers.
PHILIPS P89C60X2/61X2 80C51 8-bit Flash microcontroller family 64KB Flashhandbook
This data sheet introduces the features and characteristics of the Philips P89C60X2/61X2 80C51 8-bit Flash microcontroller family, including 64KB Flash, 512B/1024B RAM.
philips P83C557E4/P80C557E4/P89C557E4 Single-chip 8-bit microcontroller handbook
This document introduces the features of P83C557E4/P80C557E4/P89C557E4 single-chip 8-bit microcontroller