Philips manuals, page 82
PHILIPS PMEGxx05EH/EJ series 0.5 A very low VF MEGA Schottky barrier recti ers handbook
PMEGxx05EH/EJ series 0.5 A very low VF MEGA Schottky barrier rectifiers is a low voltage rectifier product launched by Philips company. It has very low forward voltage and flat lead SMD package. It is mainly used in low voltage rectification, high efficiency DC-to-DC conversion, switch mode power supply, reverse polarity protection and other occasions.
PHILIPS PMEG2005EL 20 V 0.5 A very low VF MEGA Schottky barrier recti er in leadless ultra small SOD882 package handbook
PMEG2005EL is a Schottky diode produced by Philips, with a rated forward current of 0.5A, a reverse voltage of 20V, and a SOD882 package. It has a very low forward voltage drop and power consumption.
PHILIPS 74HC/HCT109 handbook
The 74HC/HCT109 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT109 are dual positive-edge triggered, JK flip-flops with individual J, K inputs, clock (CP) inputs, set (SD) and reset (RD) inputs; also complementary Q and Q outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. The J and K inputs control the state changes of the flip-flops as described in the mode select function table. The J and K inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. The JK design allows operation as a D-type flip-flop by tying the J and K inputs together
PHILIPS 74HC/HCT112 handbook
The 74HC/HCT112 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL).
PHILIPS 74HC/HCT11 Triple 3-input AND gate handbook
The 74HC/HCT11 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A. It provides the 3-input AND function.
philips 74HC/HCT123 Dual retriggerable monostable multivibrator with reset handbook (2)
The 74HC/HCT123 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT123 are dual retriggerable monostable multivibrators with output pulse width control by three methods. The basic pulse time is programmed by selection of an external resistor (REXT) and capacitor (CEXT). The external resistor and capacitor are normally connected as shown in Fig.6. Once triggered, the basic output pulse width may be extended by retriggering the gated active LOW-going edge input (nA) or the active HIGH-going edge input (A).
PHILIPS 74HC/HCT08 Quad 2-input AND gate handbook(1)
This document describes the features and characteristics of a 74HC/HCT08 quad 2-input AND gate. It is a high-speed Si-gate CMOS device that is pin compatible with low power Schottky TTL (LSTTL). It provides the 2-input AND function.
PHILIPS 74HC08; 74HCT08 Quad 2-input AND gate handbook
74HC08 and 74HCT08 are high speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT08 provide the 2-input AND function.
PHILIPS 74HC/HCT10 Triple 3-input NAND gate handbook
The 74HC/HCT10 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT10 provide the 3-input NAND function.
PHILIPS 74HC/HCT107 Dual JK flip-flop with reset; negative-edge trigger handbook
The 74HC/HCT107 is a high-speed dual JK flip-flop featuring individual J, K, clock (nCP) and reset (nR) inputs; also complementary Q and Q outputs.
PHILIPS 74HC/HCT02 Quad 2-input NOR gate handbook
PHILIPS 74HC/HCT03 Quad 2-input NAND gate handbook
The 74HC/HCT03 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT03 provide the 2-input NAND function. The 74HC/HCT03 have open-drain N-transistor outputs, which are not clamped by a diode connected to VCC. In the OFF-state, i.e. when one input is LOW, the output may be pulled to any voltage between GND and VOmax. This allows the device to be used as a LOW-to-HIGH or HIGH-to-LOW level shifter. For digital operation and OR-tied output applications, these devices must have a pull-up resistor to establish a logic HIGH level.
PHILIPS 74HC04; 74HCT04 Hex inverter handbook
This document describes the features and characteristics of the 74HC04 and 74HCT04 high-speed Si-gate CMOS devices. They provide six inverting buffers and comply with JEDEC standards. The products operate in temperature ranges of -40 to +85°C and -40 to +125°C, and have ESD protection.
PHILIPS 74HC/HCT7030 9-bit x 64-word FIFO register; 3-state handbook
The 74HC/HCT7030 is a 9-bit x 64-word FIFO register with 3-state outputs, supporting synchronous or asynchronous operation.
PHILIPS 74HC/HCT73 Dual JK flip-flop with reset; negative-edge trigger handbook