Philips manuals, page 85
PHILIPS 74HC/HCT4024 7-stage binary ripple counter handbook
The 74HC/HCT4024 are high-speed Si-gate CMOS devices and are pin compatible with the “4024” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4024 are 7-stage binary ripple counters with a clock input (CP), an overriding asynchronous master reset input (MR) and seven fully buffered parallel outputs (Q0 to Q6). The counter advances on the HIGH-to-LOW transition of CP. A HIGH on MR clears all counter stages and forces all outputs LOW, independent of the state of CP. Each counter stage is a static toggle flip-flop. Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall times.
PHILIPS 74HC/HCT4040 12-stage binary ripple counter handbook
The 74HC/HCT4040 is a high-speed 12-stage binary ripple counter with standard output capability and MSI category.
PHILIPS 74HC/HCT4051 8-channel analog multiplexer/demultiplexer handbook
This document describes the features and characteristics of the 74HC/HCT4051, including wide voltage range, low ON resistance, logic level translation, etc.
PHILIPS 74HC/HCT4052 Dual 4-channel analog multiplexer/demultiplexer handbook
This document describes the features and characteristics of the 74HC/HCT4052 dual 4-channel analog multiplexer/demultiplexer, including wide analog input voltage range, low ON resistance, logic level translation, etc.
PHILIPS 74HC/HCT4053 Triple 2-channel analog multiplexer/demultiplexer handbook
This data sheet introduces the features and characteristics of the 74HC/HCT4053 triple 2-channel analog multiplexer/demultiplexer
PHILIPS 74HC/HCT4059 Programmable divide-by-n counter handbook
The 74hc/hct4059 is a programmable divide-by-n counter that can be programmed to divide an input frequency by any number (n) from 3 to 15999. There are four operating modes: timer, divide-by-n, divide-by-10000 and master preset, which are defined by the mode select inputs (Ka to Kc) and the latch enable input (LE) as shown in the Function table. The complete counter consists of a clock generator, a programmable counter and a latch. The clock generator is constructed using D flip-flops, whose output frequency is 1/2 of the clock frequency. The programmable counter is made up of four 14-bit Johnson counters, whose outputs are latched in the latch to form the master counter's output.
PHILIPS 74HC/HCT4060 14-stage binary ripple counter with oscillator handbook
74HC/HCT4060 is a 14-stage binary ripple counter with oscillator
PHILIPS 74HC/HCT4066 Quad bilateral switches datasheet
The 74HC/HCT4066 are high-speed Si-gate CMOS devices and are pin compatible with the “4066” of the “4000B” series. They are specified in compliance with JEDEC standard no. 7A.
PHILIPS 74HC/HCT4067 16-channel analog multiplexer/demultiplexer handbook
The 74HC/HCT4067 is a 16-channel analog multiplexer/demultiplexer with low ON resistance and non-standard output capability.
PHILIPS 74HC/HCT4075 Triple 3-input OR gate handbook
The 74HC/HCT4075 is a high-speed Si-gate CMOS device with standard output capability and is categorized as SSI. It is pin compatible with the “4075” of the “4000B” series and is specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4075 provides the 3-input OR function.
PHILIPS 74HC/HCT4094 8-stage shift-and-store bus register handbook
The 74HC/HCT4094 is an 8-stage shift-and-store bus register with the following features: Output capability: standard, ICC category: MSI
PHILIPS 74HC/HCT42 BCD to decimal decoder (1-of-10) handbook
The 74HC/HCT42 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A.
PHILIPS 74HC/HCT423 Dual retriggerable monostable multivibrator with reset handbook
The 74HC/HCT423 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL)
PHILIPS 74HC/HCT4316 Quad bilateral switches handbook
74HC/HCT4316 are high-speed Si-gate CMOS devices. They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT4316 have four independent analog switches. Each switch has two input/output terminals (nY, nZ) and an active HIGH select input (nS). When the enable input (E) is HIGH, all four analog switches are turned off. Current through a switch will not cause additional VCC current provided the voltage at the terminals of the switch is maintained within the supply voltage range; VCC >> (VY, VZ) >> VEE. Inputs nY and nZ are electrically equivalent terminals. VCC and GND are the supply voltage pins for the digital control inputs (E and nS). The VCC to GND ranges are 2.0 V to 5.5 V.
PHILIPS 74HC/HCT245 Octal bus transceiver; 3-state handbook
This data sheet provides detailed information about the 74HC/HCT245 product, including features, functions, and specifications.