Key facts
- Brand
- DELL
- Model
- PowerVault MD3000
- Category
- Disk Array
- Documents
- 12
- Languages
- FR · EN · ZH · ES
- Last added
- 2023-11-25
Start here

Dell PowerVault MD3000 RAID Storage Hardware Owner's Manual
This manual covers the Dell PowerVault MD3000, an external 3U rack-mount RAID enclosure for up to 15 3 Gbps SAS disks. It describes system features, cabling, RAID use, component installation, troubleshooting, and support resources.
The enclosure supports redundant active/active RAID controllers, redundant power supplies and fans, up to 255 virtual disks, and connection to up to two PowerVault MD1000 expansion enclosures. This manual is written in Spanish.
Dell PowerVault MD3000 specifications
| Host Bus Adapter | SAS 5/E HBA |
|---|---|
| RAID Controller Modules | Dual RAID controller modules (module 0 and module 1) |
| Management Connections | In-band SAS and out-of-band Ethernet |
Source: Dell PowerVault MD3000 Storage Array Hardware Installation and Troubleshooting Guide
All Dell PowerVault MD3000 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Disassembly, diagnostics and part numbers, for repair.
Questions answered in these manuals
How should power supplies be connected for redundancy?
On nodes with multiple power supplies, connect each to a separate AC circuit, use UPS units, and consider backup generators and power from different electrical stations in some environments.
From: Dell PowerVault MD3000 Storage Array Installation and Troubleshooting Guide
Can NIC teaming be used on private networks?
No, the cluster supports NIC teaming on public networks only.
From: Dell PowerVault MD3000 Storage Array Installation and Troubleshooting Guide
Which operating system is supported with the Dell PowerVault MD3000 and MD3000i storage arrays for Hyper-V?
Both arrays are supported with Microsoft Windows Server 2008 Release 2 running the Hyper-V role.
From: Dell PowerVault MD3000/MD3000i Storage Arrays Planning for Hyper-V
How many servers can the Dell PowerVault MD3000 connect to with SAS host interface connectivity?
It can connect with up to four servers.
From: Dell PowerVault MD3000/MD3000i Storage Arrays Planning for Hyper-V
What is required for a redundant cluster configuration with a single SAS 5/E HBA per node?
Each cluster node uses one SAS 5/E HBA and two SAS cables, connecting to both RAID controller modules (module 0 port In-0 and module 1 port In-0).
From: Dell PowerVault MD3000 Storage Array Hardware Installation and Troubleshooting Guide
How many SAS cables does each cluster node use to connect to the storage system in a non-redundant configuration?
Each node uses one SAS cable.
From: Dell PowerVault MD3000 Storage Array Hardware Installation and Troubleshooting Guide
