Key facts
- Brand
- DELL
- Model
- PowerVault MD1200
- Category
- Storage devices
- Documents
- 4
- Languages
- EN · ZH
- Last added
- 2026-11-11
Start here

Dell PowerVault MD1200 Storage Enclosures Getting Started Guide
This document serves as a Getting Started guide for the Dell PowerVault MD1200 storage enclosures. It covers the initial setup process, including unpacking the system, installing the rails and system in a rack, and connecting power cables. The guide also details how to turn on the system and install the optional bezel.
Read onlineDell PowerVault MD1200 specifications
| Supported operating modes | Unified mode and split mode |
|---|---|
| Maximum daisy-chained enclosures in unified mode | Up to four enclosures to a single controller-card port |
| Split-mode daisy-chaining | Not supported |
| MD1200 split-mode drive mapping, EMM 0 | Drives 6 to 11 |
| MD1200 split-mode drive mapping, EMM 1 | Drives 0 to 5 |
| MD1220 split-mode drive mapping, EMM 0 | Drives 12 to 23 |
| MD1220 split-mode drive mapping, EMM 1 | Drives 0 to 11 |
| Power switches | 2 |
Source: Dell PowerVault MD1200/MD1220 Storage Enclosure Setup Guide
All Dell PowerVault MD1200 documents by type
Mounting, wiring and first power-up. Read it before the hardware goes in.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
What operating modes can the enclosure use?
The enclosure can be cabled in unified mode or split mode; the mode is selected with the enclosure mode switch on the front panel.
From: Dell PowerVault MD1200/MD1220 Storage Enclosure Setup Guide
What is the correct power-on order?
Turn on the storage enclosure(s) first, then the host server(s).
From: Dell PowerVault MD1200/MD1220 Storage Enclosure Setup Guide
Which host controller is supported for MD1200 and MD1220?
Only the PERC H800 host controller is supported.
From: Dell PowerVault MD1200 and MD1220 Interoperability Guide
Can MD1200 and MD1220 be mixed on the same controller?
Yes, mixing MD1200 and MD1220 on the same PERC H800 controller is supported.
From: Dell PowerVault MD1200 and MD1220 Interoperability Guide
What safety information should be reviewed before performing procedures?
You should review the safety instructions that came with the system before performing the following procedure.
From: Dell PowerVault MD1200 Storage Enclosures Getting Started Guide
What mode must the system be in before turning on?
The storage enclosure must be connected to the server and the mode switch set to split or unified mode before turning on the system.
From: Dell PowerVault MD1200 Storage Enclosures Getting Started Guide
