Key facts
- Brand
- DELL
- Model
- 600SC
- Category
- Servers Computer
- Documents
- 2
- Languages
- EN
- Last added
- 2023-11-22
Start here

Dell PowerEdge 600SC Systems User's Guide
Dell PowerEdge 600SC Systems User's Guide provides a system overview and instructions for using the Dell OpenManage Server Assistant CD and the System Setup Program. It also documents technical specifications, I/O ports and connectors, and includes a glossary.
The guide lists hardware specifications such as microprocessor, memory, drives, ports, power, physical dimensions, and environmental limits, plus pin assignments for serial, parallel, keyboard, and mouse connectors.
Dell 600SC specifications
| Microprocessor type | Intel Pentium 4 or Pentium 4 Celeron |
|---|---|
| Front side bus speed | At least 400 MHz |
| Internal cache | 512-KB (Pentium 4) or 128-KB (Celeron) Level 2 cache |
| Expansion bus type | PCI |
| Expansion slots | Four 64-bit, 33-MHz slots and one 32-bit, 33-MHz slot |
| Memory architecture | 72-bit ECC PC-200 DDR SDRAM |
| Memory module sockets | 4 |
| Memory module capacities | 128, 256, 512 MB, or 1 GB |
| Minimum memory capacity | 128 MB |
| Maximum memory capacity | 4 GB |
| Diskette drive | 3.5-inch, 1.44-MB diskette drive |
| Hard drives | Four 1-inch IDE or SCSI hard drives |
| CD drive | IDE CD drive |
| DVD drive | Optional IDE DVD drive |
| Tape drive | Optional internal SCSI or IDE tape drive |
| Serial connector | 9-pin connector |
| Parallel connector | 25-pin connector |
| Video connector | 15-pin connector |
| Keyboard connector | 6-pin mini-DIN connector |
| Mouse connector | 6-pin mini-DIN connector |
| USB connectors | Two USB-compliant 4-pin connectors |
| Integrated NIC connector | RJ45 connector |
| EIDE channels | Three 40-pin EIDE connectors |
| Video type | ATI Rage XL video controller; VGA connector |
| Video memory | 8 MB |
| Power supply wattage | 250 W |
| Power supply voltage | 90-240 V, 47/63 Hz |
| Heat dissipation | 1137.7 BTU/hr maximum |
| Output hold-up time | 20 ms minimum |
| Maximum inrush current | May reach 50 A |
| System battery | CR2032 3.0-V lithium coin cell |
| Height | 43.1 cm (17.0 inches) |
| Width | 20.3 cm (8.0 inches) |
| Depth | 49.5 cm (19.5 inches) |
| Weight | 16.8 kg (37 lb), maximum configuration |
| Operating temperature | 10 to 35 C (50 to 95 F) |
| Storage temperature | -40 to 65 C (-40 to 149 F) |
| Operating relative humidity | 20% to 80% (noncondensing) |
| Storage relative humidity | 5% to 95% (noncondensing) |
| Operating vibration | 0.25 G (half-sine wave) at a sweep of 3 to 200 MHz for 15 minutes |
| Storage vibration | 0.5 G at 3 to 200 Hz for 15 minutes |
| Operating shock | Six shock pulses of 50 G for up to 2 ms |
| Storage shock | Six shock pulses of 70 G for up to 2 ms |
| Operating altitude | -16 to 3,048 m (-50 to 10,000 ft) |
| Storage altitude | -16 to 10,600 m (-50 to 35,000 ft) |
All Dell 600SC documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Mounting, wiring and first power-up. Read it before the hardware goes in.
Questions answered in these manuals
What is the default designation of the integrated serial connector?
COM1.
What is the default designation of the integrated parallel connector?
LPT1.
What is the default designation of the integrated serial connector?
The default designation of the integrated serial connector is COM1.
From: Dell PowerEdge 1600SC Systems Installation and Troubleshooting Guide
What happens when an added serial connector shares the integrated connector's designation?
The system's autoconfiguration feature remaps the integrated serial connector to the next available designation.
From: Dell PowerEdge 1600SC Systems Installation and Troubleshooting Guide
