Key facts
- Brand
- Analog Devices
- Model
- ADP3333
- Industry
- Industrial
- Documents
- 2
- Languages
- EN
- Last added
- 2012-05-04
Start here
Analog Devices ADP3333 Rev. B Datasheet
The ADP3333 Rev. B is a precision low‑dropout (LDO) regulator offering high accuracy (±0.8% at 25 °C) and low noise in an ultrasmall 8‑lead MSOP package. It operates from 2.6 V to 12 V supply voltage, delivers up to 300 mA load current, and requires only a 1.0 µF output capacitor for stability, making it suitable for space‑constrained applications such as cellular phones and PDAs.
The datasheet provides detailed specifications, absolute maximum ratings, pin descriptions, typical performance curves, theory of operation, and design guidance including capacitor selection, thermal overload protection, shutdown mode, PCB layout recommendations, outline dimensions and ordering information.
Analog Devices ADP3333 specifications
| Line Regulation | 0.04 mV/V |
|---|---|
| Load Regulation | 0.04 mV/mA |
| Dropout Voltage (300 mA, typical) | 140 mV |
| Output Noise (10 Hz‑100 kHz, 10 µF, 300 mA) | 45 µV rms |
| Shutdown Current (typical) | < 1 µA |
| Supply Voltage Range | 2.6 V to 12 V |
| Operating Ambient Temperature Range | −40 °C to +85 °C |
| Package | 8‑Lead MSOP |
All Analog Devices ADP3333 documents by type
Ratings, dimensions and ordering codes, for selection and design work.
Questions answered in these manuals
What is the maximum output current of the ADP3333?
The device delivers up to 300 mA continuous load current, with a short‑circuit limit of about 1 A.
How much output capacitance is required for stability?
Only a 1.0 µF output capacitor is needed, and any type (including MLCC) is supported.
What output capacitor is required for stability?
The regulator is stable with any good capacitor; a minimum of 1 µF is required for stability.
From: Analog Devices ADP3333 Low‑Dropout Regulator Datasheet