Industrial

ST62T52C/T62C/E62C is an 8-bit OTP/EPROM MCU with A/D converter, safe reset, auto-reload timer and EEPROM.

The LT ®1683 is a switching regulator controller designed to lower conducted and radiated electromagnetic interference (EMI). Ultralow noise and EMI are achieved by controlling the voltage and current slew rates of external N-channel MOSFET switches. Current and voltage slew rates can be independently set to optimize harmonic content of the switching waveforms vs efficiency. The LT1683 can reduce high frequency harmonic power by as much as 40dB with only minor losses in efficiency. The LT1683 utilizes a dual output (push-pull) current mode architecture optimized for low noise topologies. The IC includes gate drivers and all necessary oscillator, control and protection circuitry. Unique error amp cir- cuitry can regulate both positive and negative voltages. The oscillator may be synchronized to an external clock for more accurate placement of switching harmonics. Protection features include gate drive lockout for low VIN, opposite gate lockout, soft-start, output current limit, short-circuit current limiting, gate drive overvoltage clamp and input supply undervoltage lockout.

RF3806 GaAs HBT is a GaAs power amplifier from RFMD company, specifically designed for linear applications. This device uses a highly reliable GaAs HBT fabrication process and achieves high output power over a broad frequency range.

This document describes the features and characteristics of the STS6PF30L P-CHANNEL 30V - 0.027 Ω - 6A SO-8 STripFET™ POWER MOSFET product, released on May 1, 2003. It includes low on-resistance, high packing density, rugged avalanche characteristics, and ease of automated surface mount assembly.

TLM.310. Vishay Telefunken is an SMD LED produced by Vishay Telefunken. It has the characteristics of high brightness, low power consumption, compatibility with automatic placement equipment, high reliability, etc. It is suitable for backlighting and indicator lamps of automotive dashboards and switches, telephones and fax machines, audio and video equipment, office equipment, LCD displays, switches and symbols.

AVX recognized the need to produce a MLCC with enhanced mechanical strength to meet the increased requirements from the automotive industry. They developed a soft termination structure that can maintain electrical integrity even when external forces are applied. This MLCC is suitable for automotive applications and PCBs that may experience high levels of board flexure.

The LMH6733 is a triple, wideband, operational amplifier designed specifically for use where high speed and low power are required. Input voltage range and output voltage swing are optimized for operation on supplies as low as 3V and up to ±6V. Benefiting from National’s current feedback architecture, the LMH6733 offers a gain range of ±1 to ±10 while providing stable operation without external compensation, even at unity gain. These amplifiers provide 650 MHz small signal bandwidth at a gain of 2 V/V , a low 2.1 nV/ input referred noise and only consume 5.5 mA (per amplifier) from a single 5V supply.

This document describes the features and characteristics of Vishay Telefunken's TLUR54../64.. LED products, including DC and pulse operation, luminous intensity categorization, 5mm package, etc.

This document describes the general features and applications of the 2N7000 and 2N7002 N-CHANNEL 60V - 1.8Ω - 0.35A SOT23-3L - TO-92 STripFET™II MOSFET, released on April 1, 2005.

The document describes Zener diodes with models ranging from BZD27C3V6P to BZD27C200P. These diodes have features such as low power dissipation, low leakage current, excellent stability, and high-temperature soldering.

XC25BS6 series are clock generators with built-in crystal oscillator circuit

This datasheet provides a detailed description of the features and characteristics of the X9119 Single Digitally-Controlled (XDCP ™) Potentiometer.

The L4975A is a 5A output current, 5.1V to 40V output voltage range, 0 to 90% duty cycle range step-down monolithic power switching regulator that has internal feed-forward line regulation, internal current limiting, precise 5.1V ± 2% on chip reference, reset and power fail functions, soft start, input/output sync pin, under voltage lock out with hysteretic turn-on, PWM latch for single pulse per PE-RIOD, very high efficiency, switching frequency up to 500KHz, thermal shutdown, continuous mode operation.

X60008B-41, X60008C-41, X60008D-41 Precision 4.096V FGA™ Voltage Reference offers outstanding long-term stability and very low power consumption.

The LM2575/LM2575/LM2575HV SIMPLE SWITCHER® 1A Step-Down Voltage Regulator is a high-efficiency, monolithic integrated circuit that provides all the active functions for a step-down (buck) switching regulator. It is available in fixed output voltages of 3.3V, 5V, 12V, 15V, and an adjustable output version, and can drive a 1A load with excellent line and load regulation.