Industrial

The MAX3802 is a single-chip quad adaptive cable equalizer and cable driver designed for coaxial and twin-axial cable point-to-point scrambled data communications applications.

The DRV8312/32 is a three-phase PWM motor driver from TI. Its high-efficiency power stage (up to 97%) makes it an ideal choice for energy-efficient applications. The DRV8312/32 requires two power supplies, one 12V GVDD and VDD power supply, and another up to 50V PVDD power supply. The DRV8312/32 can operate at up to 500kHz switching frequency while still maintaining precise control and high efficiency. They also have an innovative protection system safeguarding the device against a wide range of fault conditions that could damage the system. These safeguards include short-circuit protection, overcurrent protection, and undervoltage protection.

The MAX3784/MAX3784A 5Gbps equalizers provide compensation for transmission-medium losses in up to 40in of FR-4. They are optimized for short-run length and balanced codes such as 8b10b, as found in multiplexed 1.25Gbps Ethernet systems and 4.25Gbps Fibre Channel. The equalizers use differential CML data inputs and outputs. A standby mode reduces power consumption when the parts are not in use. The MAX3784/ MAX3784A are available in a 4mm × 4mm, 16-pin QFN package that consumes only 185mW at +3.3V.

CD4078B types are supplied in 14-lead hermetic dual-in-line ceramic packages (F3A suffix), 14-lead dual-in-line plastic packages (E suffix), 14-lead small-outline packages (M, MT, M96, and NSR suffixes), and 14-lead thin shrink small-outline packages (PW and PWR suffixes).

The TCDT1110/ TCDT1110G is an optocoupler produced by Vishay Semiconductors. It has low coupling capacity, high common mode rejection, low temperature coefficient of CTR and unconnected base. The product meets the requirements of ROHS 2002/95/EC and WEEE 2002/96/EC standards and has obtained UL1577, BSI IEC60950 IEC60065, DIN EN 60747-5-2 (VDE0884) DIN EN 60747-5-5 pending, FIMKO certification. Suitable for switch-mode power supplies, line receivers, computer peripheral interfaces and microprocessor system interfaces.

The MAX3785 6.25Gbps 1.8V PC Board Equalizer is a product of Maxim Integrated, which operates from a single 1.8V supply and compensates for transmission medium losses encountered with FR-4 transmission lines. This product is optimized for low-voltage, high-density, DC-coupled interconnections between the line card and switch card, allowing a system upgrade path while maintaining a legacy rate of 2.5Gbps to 3.125Gbps. The product is roughly the size of two 0603 passive components, which makes it easy to place and route.

VLMK/Y61.. is a SMD LED product released by Vishay company. This product uses AlInGaP technology and has low thermal resistance, high luminous efficiency and other characteristics. It can be widely used in backlight, automotive lighting and other fields.

The MAX3804 driver with integrated analog equalizer compensates up to 20dB of loss at 5GHz. It is designed to ensure PC board signal integrity up to 12.5Gbps, where frequency-dependent skin effect and dielectric losses typically produce unacceptable amounts of inter-symbol interference. The MAX3804 can extend the practical chip-to-chip transmission distance for 10Gbps NRZ serial data up to 30in (0.75m) on FR-4, and it significantly decreases deterministic jitter. Residual jitter after equalization for 10.7Gbps signals is typically 24psP-P on the maximum path length. The MAX3804 is ideal for 10Gbps chip-to-chip serial interconnections on inexpensive FR-4 material. Its 3mm×3mm package affords optimal placement and routing flexibility. It has separate VCC connections for internal logic and current-mode logic (CML) I/O. This allows the CML input and output to be referenced to isolated supplies, providing independent DC-coupled interfacing to 1.8V, 2.5V, or 3.3V ICs. Eight discrete levels of input equalization can be selected through a digital control input, enabling the equalizer to be matched to a range of transmission line path loss. When correctly set to match the path loss, the MAX3804 provides optimal performance over a wide range of data rates and formats. Applications include OC-192 and 10Gb Ethernet switches and routers, OC-192 and 10Gb Ethernet serial modules, high-speed signal distribution.

The MAX3803 is a high-performance differential line equalizer from Maxim Integrated Products. It has a small size of 2mm x 2.5mm and supports 1Gbps to 3.2Gbps transmission speed. It is suitable for backplane interconnect, rack-to-rack interconnect and other applications.

This document describes the 74F02 Quad 2-Input NOR Gate manufactured by Fairchild Semiconductor Corporation, including the features and characteristics of the product.

The MAX3983 is a quad copper-cable signal conditioner from Maxim Integrated. It operates from 2.5Gbps to 3.2Gbps and provides compensation for 4x copper InfiniBand and 10Gbase-CX4 Ethernet links, allowing spans of 20m with 24AWG and 15m with 28AWG. The cable driver section provides four selectable preemphasis levels. The input to the cable driver compensates for up to 0.5m of FR4 circuit board material. The cable receiver section provides additional fixed input equalization while offering selectable preemphasis to drive FR4 circuit boards up to 0.5m. The MAX3983 also features signal detection on all eight inputs and internal loopback that allows for diagnostic testing. It is packaged in a 10mm x 10mm, 68-pin QFN and operates from 0°C to +85°C.

VEMI85AA-HGK is an 8-channel EMI filter produced by Vishay Semiconductors. It uses an ultra-compact LLP3313-17L package with a package profile of only 0.6mm. The product features low leakage current, line resistance of 100Ω, typical cutoff frequency of 100MHz, and ESD protection.

The MAX3982 is a single-channel, copper-cable preemphasis driver that operates from 1Gbps to 4.25Gbps. It provides compensation for copper links, such as 4.25Gbps Fibre Channel, allowing spans of up to 15m with 24AWG. The cable driver provides four selectable preemphasis levels. The input compensates for up to 10in of FR4 circuit board material at 4.25Gbps. The MAX3982 also features SFP-compliant loss-of-signal detection with selectable sensitivity and TX_DISABLE. Selectable output swing reduces EMI and power consumption. It is packaged in a 3mm x 3mm, 16-pin thin QFN and operates from 0°C to +85°C temperature range.

The MAX3787 is a 1Gbps to 12.5Gbps equalization network that compensates for transmission medium losses encountered with FR4 and cables.