Industrial

This product is a 6-line ESD protection diode array

BYV27/. is a Vishay Semiconductors ultra fast avalanche sinterglass diode with the following characteristics: controlled avalanche characteristic, low forward voltage, ultra fast recovery time, glass passivated junction, hermetically sealed package, lead (Pb)-free component, component in accordance to RoHS 2002/95/EC and WEEE 2002/96/EC. The diode is suitable for very fast rectification applications such as switch mode power supplies.

The Philips Semiconductors SCC68692 Dual Universal Asynchronous Receiver/Transmitter (DUART) is compatible with SCN68681. It is a single-chip CMOS-LSI communications device that provides two full-duplex asynchronous receiver/transmitter channels in a single package. It is compatible with other S68000 family devices and can also interface easily with other microprocessors. The DUART can be used in a polled or interrupt driven systems. The operating mode and data format of each channel can be programmed independently. Additionally, each receiver and transmitter can select its operating speed as one of eighteen fixed baud rates, a 16X clock derived from a programmable counter/timer, or an external 1X or 16X clock. The baud rate generator and counter/timer can operate directly from a crystal or from external clock inputs. The ability to independently program the operating speed of the receiver and transmitter make the DUART particularly attractive for dual-speed channel applications such as clustered terminal systems. Each receiver is quadruple buffered to minimize the potential of receiver over-run or to reduce interrupt overhead in interrupt driven systems.

QT1101-ISG 10 KEY QTOUCH™ SENSOR IC is a self-contained, patented digital controller capable of detecting near-proximity or touch on up to 10 electrodes. It allows electrodes to project independent sense fields through any dielectric such as glass or plastic. This capability coupled with its continuous self-calibration feature can lead to entirely new product concepts, adding high value to product designs. The devices are designed specifically for human interfaces, like control panels, appliances, gaming devices, lighting controls, or anywhere a mechanical switch or button may be found; they may also be used for some material sensing and control applications. Each of the channels operates independently of the others, and each can be tuned for a unique sensitivity level by simply changing a corresponding external Cs capacitor. Patented AKS™ Adjacent Key Suppression suppresses touch from weaker responding keys and allows only a dominant key to detect, for example to solve the problem of large fingers on tightly spaced keys. Spread spectrum burst technology provides superior noise rejection. These devices also have a SYNC/LP pin which allows for synchronization with additional similar parts and/or to an external source to suppress interference, or, an LP (low power) mode which conserves power.

This is a Vishay Semiconductors S07B / 07D / 07G / 07J / 07M small signal fast switching diode with high voltage characteristics, suitable for surface mount applications. The diode uses JEDEC DO-219AB (SMF®) plastic packaging and weighs approximately 15 mg. The terminals can be soldered at 260 °C/10 seconds.

Leadtek LR9101LP GPS Module is a low-cost, high-performance GPS module that supports multiple augmentation systems (WAAS/EGNOS/DGPS) and integrates 1PPS signal output and time synchronization function.

The MLX80001 is a 4 channel physical layer device for applications of low speed vehicle serial data network communication using the Local Interconnect Network (LIN) protocol. The device is designed in accordance to the physical layer definition of the LIN Protocol Specification Package 2.x and the SAE J2602 standard. The IC furthermore can be used in other applications based on the LIN 2.x specification.

The M45PE40 is a 4-Mbit, page-erasable serial flash memory with byte-alterability and a 75 MHz SPI bus interface.

This document introduces the features and characteristics of Cirrus Logic CS4245 105 dB, 24-Bit, 192 kHz Stereo Audio CODEC.

AVX has launched a MLCC called FLEXITERM® with enhanced mechanical strength to meet the increased requirements of the automotive industry. It provides up to 5mm of flexure without internal cracks and is suitable for high flexure stress circuit boards and variable temperature applications.

The IR3640M is a synchronous Buck PWM controller designed for performance demanding DC/DC applications. The single loop voltage mode architecture simplifies design while delivery precise output voltage regulation and fast transient response. Because of its wide input and output voltage range it can be used in a large variety of point of load applications within a system and across different markets. The part is designed to drive a pair of N-Channel MOSFETs from 250kHz to 1.5Mhz switching frequency giving designers the flexibility to optimize the solution for best efficiency or smallest footprint. The output voltage can be precisely regulated from as low as 0.7V within a wide input voltage range.

The DAC7512 is a low-power, single, 12-bit buffered voltage output Digital-to-Analog Converter (DAC). Its on-chip precision output amplifier allows rail-to-rail output swing to be achieved. The DAC7512 uses a versatile three-wire serial interface that operates at clock rates up to 30MHz and is compatible with standard SPI™, QSPI™, Microwire™, and DSP interfaces. The reference for the DAC7512 is derived from the power supply, resulting in the widest dynamic output range possible. The DAC7512 incorporates a power-on reset circuit that ensures that the DAC output powers up at 0V and remains there until a valid write takes place in the device. The DAC7512 contains a power-down feature, accessed over the serial interface, that can reduce the current consumption of the device to 50nA at 5V. The low power consumption of this part in normal operation makes it ideally suited to portable battery-operated equipment. The power consumption is 0.7mW at 5V reducing to 1µW in power-down mode. The DAC7512 is available in a SOT23-6 package and an MSOP-8 package.