Industrial

X40410, X40411, X40414, X40415 4kbit EEPROM Dual Voltage Monitor with Integrated CPU Supervisor is a low power CMOS device produced by Intersil. It has 4kbits of EEPROM and 2-wire interface, and can monitor 5V to 0.9V of voltage range. It is used in communication equipment, routers, switches, disk arrays, networks, etc.

TPS6300x is a high-efficiency single inductor buck-boost converter with up to 1200mA output current and a working voltage range of 1.8V~5.5V.

BAV99-V is a dual small signal switching diode with fast switching speed and high conductance. It is ideally suited for automatic insertion with a surface mount package. It is lead (Pb)-free and compliant with RoHS 2002/95/EC and WEEE 2002/96/EC standards.

The X1288 is an integrated circuit produced by xicor, which integrates real-time clock, calendar, CPU supervisor and EEPROM.

Hyper Micro SIDELED® Hyper-Bright LED is a lead-free product that complies with RoHS standards. It has a white SMT housing and colorless clear resin, and is especially suitable for light guide coupling. The product has 4 wavelengths: 633nm (super-red), 615nm (amber), 606nm (orange) and 587nm (yellow), and a light beam angle of Lambertian Emitter (120°). The product's technology is InGaAlP, and its optical efficiency is 9 lm/W (yellow, orange, amber) and 5 lm/W (super-red). It can be used for all SMT assembly technologies.

This document is a copyright 2003 document provided by ICminer.com Electronic-Library Service. The document describes the features and characteristics of ICminer.com Electronic-Library Service.

The SP7652 is a synchronous step-down switching regulator optimized for high efficiency. The part is designed to be especially attractive for dual supply, 12V step down with 5V used to power the controller. This lower VCC voltage minimizes power dissipation in the part. The SP7652 is designed to provide a fully integrated buck regulator solution using a fixed 600kHz frequency, PWM voltage mode architecture. Protection features include UVLO, thermal shutdown and output short circuit protection. The SP7652 is available in the space saving DFN package.

This document is about the production data of WM8738 24 Bit Stereo ADC, which is a high performance stereo audio ADC designed for consumer applications. It has 90 dB SNR ('A' weighted @ 48kHz) audio performance, supports 3.0-5.5V analog power operation and 3.0-3.6V digital power operation. The device supports 32kHz-96kHz ADC sampling frequency and 14-pin SOIC package.

This is a PDF file of ICminer Electronic Library

The CC1100 is a low cost true single chip UHF transceiver designed for very low power wireless applications. The circuit is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 315, 433, 868 and 915 MHz, but can easily be programmed for operation at other frequencies in the 300-348 MHz, 400-464 MHz and 800-928 MHz bands. The RF transceiver is integrated with a highly configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up to 500 kbps. The communication range can be increased by enabling a Forward Error Correction option, which is integrated in the modem. CC1100 provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication and wake-on-radio. The main operating parameters and the 64-byte transmit/receive FIFOs of CC1100 can be controlled via an SPI interface. In a typical system, the CC1100 will be used together with a m

w77ie58 8-bit microcontroller

This document introduces TPS61010, TPS61011, TPS61012, TPS61013, TPS61014, TPS61015, TPS61016 these high efficiency, 1-cell and 2-cell boost converters. These devices use an integrated synchronous rectifier for highest power conversion efficiency (>95%), support output current of 200 mA with a supply voltage of only 0.9 V. The converter starts up into a full load with a supply voltage of only 0.9 V and stays in operation with supply voltages down to 0.8 V. Since it uses a built-in synchronous rectifier, no external Schottky diode is required, thus the system efficiency is improved. The current through the switch is limited to a maximum of 50 µA.

This document is the datasheet of the VUO 25 series Schottky diodes from IXYS company. It introduces the features and characteristics of this series of diodes, including reverse voltage, forward current, leakage current, power loss, switching loss, and temperature rise.

The document introduces the features and characteristics of the LTC4244/LTC4244-1 product. The product can control -12V, 3.3V, 5V and 12V power supplies, with a ±14.4V absolute maximum rating, 12VIN and -12VIN input pins have transient voltage tolerance, adjustable foldback current limiting with circuit breaker, local PCI_RST# logic and PRECHARGE output for biasing I/O pins, LTC4244-1 designed for applications without -12V and with 20-lead narrow SSOP package.

TFDU4300 is a low profile infrared transceiver module from Vishay. It features a 2.5mm low height package, support for low voltage IO interfaces, compliance to the latest IrDA® physical layer standard, and speeds up to 115.2kbit/s for fast data transmission. It also supports carrier based remote control applications.