This page provides manuals, user guides, handbooks, specifications, and maintenance instructions for Industrial. View online or download for free. Showing page 2624.
The FETKYTM family of Co-packaged HEXFETs and Schottky diodes offer the designer an innovative board space saving solution for switching regulator and power management applications. Generation 5 HEXFETs utilize advanced processing techniques to achieve extremely low on-resistance per silicon area. Combinining this technology with International Rectifier's low forward drop Schottky rectifiers results in an extremely efficient device suitable for use in a wide variety of portable electronics applications.
The MC623 3.0V dual trip point temperature sensor is a 3.0V solid-state, programmable temperature sensor designed for use in thermal management applications. It features dual thermal interrupt outputs (LOW LIMIT and HIGH LIMIT) each of which program with a single external resistor. When measured temperature exceeds the user-programmed limits, the HIGH LIMIT and LOW LIMIT outputs are driven active (high). When temperature exceeds the HIGH LIMIT setpoint, the CONTROL output is driven active (high), and turned off when temperature falls below the LOW LIMIT setpoint. The CONTROL output can be used to provide simple ON/OFF control to a cooling fan if so desired. Low voltage operation, easy setpoint programming, small size and low cost make the MC623 an ideal choice for many thermal management applications.
This datasheet provides the data information of IR2153(S) half-bridge gate driver, including product features, typical connections, package dimensions, etc.
IR2122(S) is a high voltage, high-speed power MOSFET and IGBT driver with a floating channel design for bootstrap operation. It is fully operational up to +600V, tolerant to negative transient voltage, and immune to dV/dt. It has a gate drive supply range from 10 to 20V, undervoltage lockout, and compatibility with 3.3V, 5V, and 15V input logic. It also features an FAULT lead to indicate shutdown and an output out of phase with input.
The MC623 is a 3V solid-state, programmable temperature sensor designed for use in thermal management applications. It features dual thermal interrupt outputs (LOW LIMIT and HIGH LIMIT) each of which program with a single external resistor. The HIGH LIMIT and LOW LIMIT outputs are driven active (high) when measured temperature exceeds the user-programmed limits. The CONTROL output is driven active (high) when temperature exceeds the HIGH LIMIT setpoint, and turned off when temperature falls below the LOW LIMIT setpoint. The CONTROL output can be used to provide simple ON/OFF control to a cooling fan if so desired. Low voltage operation, easy setpoint programming, small size and low cost make the MC623 an ideal choice for many thermal management applications.
This document describes the features and characteristics of IDT's DSC 5900 product, including a 32-bit microprocessor, enhanced MIPS-II ISA, DSP instructions, MMU, cache management, interrupt controller, I2C interface, UARTs, counter/timers, general-purpose I/O pins, SDRAM controller, and peripheral device controller.
This datasheet provides functional block diagram and feature information for the FCT163244/A/C 16-bit buffer/line driver, such as 0.5-micron CMOS process, typical output skew <250ps, ESD>2000V, packages include 25-mil pitch SSOP, 19.6-mil pitch TSSOP, and 15.7-mil pitch TVSOP, extended commercial range -40°C to +85°C, VCC=3.3V±0.3V, normal range or VCC=2.7 to 3.6V, extended range, CMOS power levels (0.4µW typical static).
IDT7025S/L is a high-speed dual-port static RAM chip produced by Integrated Device Technology, Inc. It has true dual-port memory cells that allow simultaneous access to the same memory location. It has low power consumption of up to 750 mW and a high access speed of 20/25/35/55/70 ns.
The FCT8xxT series is built using an advanced dual metal CMOS technology. The FCT8xxT bus interface latches are designed to eliminate the extra packages required to buffer existing latches and provide extra data width for wider address/data paths or buses carrying parity. The FCT841T are buffered, 10-bit wide versions of the popular FCT373T function. They are ideal for use as an output port requiring high IOL/IOH. All of the FCT8xxT high-performance interface family can drive large capacitive loads, while providing low-capacitance bus loading at both inputs and outputs. All inputs have clamp diodes to ground and all outputs are designed for low-capacitance bus loading in high-impedance state.
IDT23S05E is a 3.3V zero delay clock buffer from IDT company. It is suitable for high-speed clock distribution applications. The device accepts one reference input and drives five low-skew clocks.
This document is a product specification manual, which mainly introduces the characteristics of the product, such as operating frequency and clock frequency.
The ICL7112 is a monolithic 12-bit resolution, fast successive approximation A/D converter. It uses thin film resistors and CMOS circuitry combined with an on-chip PROM calibration table to achieve 12-bit linearity without laser trimming. Special design techniques used in the DAC and comparator result in high speed operation, while the fully static silicon-gate CMOS circuitry keeps the power dissipation very low. Microprocessor bus interfacing is eased by the use of standard memory WRite and ReaD cycle timing and control signals, combined with Chip Select and Address pins. The digital output pins are byte-organized and three-state gated for bus interface to 8-bit and 16-bit systems. The lCL7112 provides separate Analog and Digital grounds for increased system accuracy. Operating with ±5V supplies, the lCL7112 accepts 0V to +10V input with a -10V reference or 0V to -10V input with a +10V reference.
