Industrial

The 7477/7478 is a single-chip 8-bit CMOS microcomputer with simple instructions, ROM, RAM, and I/O addresses all located in the same memory map for easy programming. In addition, embedded PROM type microcomputers with built-in electrically writable PROM and additional functions equivalent to the mask ROM version are also available. The 7477/7478 group products are shown below. The 7477 and the 7478 differ only in the number of I/O ports, package outline, and clock generating circuit.

MC6805R3CFN supplier information

The MC68040V is a high-performance, 32-bit, 3.3-V, static microprocessor that provides a low-power mode of operation.

This manual describes the capabilities, operation, and programming of the MC68030 32-bit second-generation enhanced microprocessor.

This manual describes the features, operation, and maintenance of the MC68360 QUAd Integrated Communications Controller (CIC).

M35046-XXXSP/FP is a character pattern display control IC produced by Mitsubishi, which uses a silicon gate CMOS process and is housed in a 20-pin shrink DIP (M35046-XXXSP) or a 20-pin shrink SOP package (M35046- XXXFP). This chip can be used for liquid crystal displays and plasma displays for display control, supporting 288 characters of display, a character dot matrix of 12×18, and supporting 4 kinds of character sizes, 1000 horizontal display positions and 1023 vertical display positions, supporting 8 kinds of color output.

M2V64S20DTP-6,-6L,-7,-7L,-8,-8L is a synchronous DRAM produced by Mitsubishi Electric, with a maximum clock frequency of up to 133MHz

M28256 256 Kbit (32Kb x8) Parallel EEPROM with Software Data Protection is a low power Parallel EEPROM with 64 bytes page write operation, support 5V and 3V power supply, using ST Microelectronics proprietary double polysilicon CMOS technology.

The M27C4001 is a 4 Mbit EPROM offered in the two ranges UV (ultra violet erase) and OTP (one time programmable). It is ideally suited for micro- processor systems requiring large programs and is organised as 524,288 by 8 bits. The chip has low power consumption, operates at a supply voltage of 5V ± 10% in read operation, and has an access time of 35ns.

Luxeon III is a revolutionary, energy efficient and ultra compact new light source, combining the lifetime and reliability advantages of Light Emitting Diodes with the brightness of conventional lighting. Luxeon III is rated for up to 1400mA operation, delivering increased lumens per package. Luxeon Emitters give you total design freedom and unmatched brightness, creating a new world of light. Luxeon Emitters can be purchased in reels for high volume assembly. For more information, consult your local Lumileds representative. For high volume applications, custom Luxeon power light source designs are available upon request, to meet your specific needs.

This data sheet provides detailed information on the LTC2601/LTC2611/LTC2621 16-, 14- and 12-bit, 2.5V to 5.5V single-supply, single DACs that can be used individually or in cascaded applications. These devices feature built-in high performance output buffers and are guaranteed monotonic.

The LT6554 is a high-speed triple video buffer with an internally fixed gain of 1 from Linear Technology Corporation. The individual buffers are optimized for performance with a 1k load and feature a 2VP–P full signal bandwidth of 400MHz, making them ideal for driving very high-resolution video signals. Separate power supply pins for each amplifier boost channel separation to 90dB, allowing the LT6554 to excel in many high-speed applications. While the performance of the LT6554 is optimized for dual supply operation, it can also be used on a single supply as low as 4.5V. Using dual 5V supplies, each amplifier draws only 8mA. When disabled, the amplifiers draw less than 100µA and the outputs become high impedance. Furthermore, the amplifiers are capable of turning on in less than 50ns, making them suitable for multiplexing and portable applications. The LT6554 is manufactured on Linear Technology’s proprietary low voltage complementary bipolar process and is available in the 16-lead SSOP package that fits in the same PCB area as an SO-8 package.

The LT1220 is a high-speed operational amplifier with superior DC performance. It features reduced input offset voltage, lower input bias currents, and higher DC gain compared to similar devices. The circuit is a single gain stage that includes proprietary DC gain enhancement circuitry for precision with high speed. Its high gain and fast settling time make it an ideal choice for data acquisition systems. The circuit is also capable of driving large capacitive loads, making it useful in buffer or cable driver applications.