Industrial

MC10E/100E131 is a quad master-slave D-type flip-flop with differential outputs, released by Motorola in 1996. The device can be clocked separately by keeping the common clock (CC) low and using the clock enable (CE) inputs for clocking. Common clocking is achieved by keeping the CE inputs low and using CC to clock all four flip-flops. In this case, the CE inputs perform the function of controlling the common clock to each flip-flop. Individual asynchronous resets are provided (R). Asynchronous set controls (S) are ganged together in pairs, with the pairing chosen to reflect physical chip symmetry. Data enters the master when both CC and CE are LOW, and transfers to the slave when either CC or CE (or both) go HIGH.

This datasheet provides the data of MC10E/100E122, including pinout, electrical characteristics, package etc.

MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. An internally generated reference supply (VBB) is available for single-ended reception. It has a maximum propagation delay of 500ps, VBB supply output, dedicated VCCO pin for each receiver, extended 100E VEE range of -4.2V to -5.46V, and 75kΩ input pulldown resistors.

This is a summary of the MC10E/100E112 datasheet. It is a quad driver with two pairs of OR/NOR outputs from each gate, and a common, buffered enable input. The device can be used as an ECL memory address fan-out driver, or as a clock driver, although the MC10E/100E111 is specifically designed for this purpose, and offers lower skew than the E112. For memory address driver applications where scan capabilities are required, please refer to the E212 device.

The MC10E/100E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signal is fanned out to 9 identical differential outputs. An enable input is also provided. A HIGH disables the device by forcing all Q outputs LOW and all Q outputs HIGH.

The MC10E/100E111 is a low skew 1-to-9 differential driver, designed with clock distribution in mind. It accepts one signal input, which can be either differential or else single-ended if the VBB output is used. The signal is fanned out to 9 identical differential outputs. An enable input is also provided. A HIGH disables the device by forcing all Q outputs LOW and all Q outputs HIGH.

The MC10E107/D is a Quint 2-Input XOR/XNOR Gate from ON Semiconductor with features such as 600 ps Maximum Propagation Delay and OR/NOR Function Outputs.

The MC10E/100E107 is a quint 2-input XOR/XNOR gate. The function output F is the OR of all five XOR outputs, while F is the NOR. If only the F outputs are to be used, the Q outputs need not be terminated.

The MC10E/100E104 is a quint 2-input AND/NAND gate from Motorola that has a maximum propagation delay of 600ps and can output OR and NOR logic levels.

The MC10E/100E101 is a quad 4-input OR/NOR gate.

This is an English document introducing the MC33178/9 low power low noise operational amplifiers

This document is downloaded from www.AllDataSheet.com, a free datasheet search website. The copyright of this document belongs to each manufacturing company and cannot be modified without permission. The abstract does not mention specific product features and characteristics.

BFT93W is a PNP type transistor produced by Philips Semiconductors. It is suitable for wideband applications below 2 GHz.