Philips Manuals - Page 45

ManualLib has 6,916 Philips manuals, in categories such as Cell Phones, Mobilephone Accessories, Digital cameras, Camcorders. Every file can be read online or downloaded as a PDF for free.

Philips manuals, page 45

  • PHILIPS 74F138 1-of-8 decoder/demultiplexer handbook

    The 74F138 is a 1-of-8 decoder/demultiplexer produced by Philips Semiconductors. It has demultiplexing capability, multiple input enable function, and is ideal for memory chip select decoding.

  • PHILIPS 74F14 Hex inverter Schmitt trigger handbook

    The 74F14 is a six-inverter Schmitt trigger IC produced by Philips. It accepts standard TTL input signals and provides standard TTL output levels. It can transform slowly changing input signals into sharply defined, jitter-free output signals. In addition, it has greater noise margin than conventional inverters. Each circuit contains a Schmitt trigger followed by a Darlington level shifter and a phase splitter driving a TTL totem-pole output. The Schmitt trigger uses positive feedback to effectively speed-up slow input transitions, and provide different input threshold voltages for positive-going and negative-going input threshold (typically 800mV) is determined internally by resistor ratios and is insensitive to temperature and supply voltage variations.

  • PHILIPS 74F113 Dual J-K negative edge-triggered flip-flops without reset handbook

    The 74F113 is a dual negative edge-triggered JK-type flip-flop manufactured by Philips Semiconductors. It features individual J, K, clock (CP), set (SD) inputs, true and complementary outputs. When the asynchronous SD input is low, it forces the outputs to the steady state levels shown in the function table, regardless of the level at the other inputs. When the clock (CP) input is high, the J and K inputs are enabled and data will be accepted. The logic levels at the J and K inputs may be allowed to change while the CP is high, and the flip-flop will perform according to the function table as long as minimum setup and hold times are observed. Output changes are initiated by the high-to-low transition of the CP.

  • PHILIPS 74F112 Dual J-K negative edge-triggered flip-flop handbook

    74F112 is a dual J-K negative edge-triggered flip-flop produced by Philips Semiconductors. It has individual J, K, Clock (CPn), Set (SD) and Reset (RD) inputs, true (Qn) and complementary (Qn) outputs. When the SD and RD inputs are low, they set or reset the outputs as shown in the Function Table, regardless of the level at the other inputs. A high level on the clock (CPn) input enables the J and K inputs and data will be accepted. The logic levels at the J and K inputs may be allowed to change while the CPn is high and flip-flop will perform according to the Function Table as long as minimum setup and hold times are observed. Output changes are initiated by the High-to-Low transition of the CPn.

  • PHILIPS 74F109 Positive J-K positive edge-triggered flip-flops handbook

    74F109 is a dual positive edge-triggered JK-type flip-flop produced by Philips. It has independent J, K, clock, set, and reset inputs. The device works in the temperature range of -40 ° C to +85 ° C, with a maximum clock frequency of 125MHz and a typical current of 12.3mA.

  • PHILIPS 74F08 Quad two-input AND gate handbook

    This document describes the product specifications of the 74F08 quad two-input AND gate integrated circuit from Philips Semiconductors. It includes information on pin configuration, operating temperature range, propagation delay, and supply current.

  • PHILIPS 74F04 Hex inverter handbook

    The 74F04 is a hex inverter chip launched by Philips. Its operating voltage is 5V and its working temperature range is -40 to +85 degrees. The pin definition is 14-pin plastic DIP.

  • PHILIPS 74F02 Quad 2-input NOR gate handbook

    This document is the 74F02 Quad 2-input NOR gate product specification, which introduces the features, characteristics and usage methods of the product.

  • PHILIPS 74F00 Quad 2-input NAND gate handbook

    74F00 is a quad 2-input NAND gate circuit produced by PHILIPS. Its feature is the industrial temperature range (-40°C to +85°C). The rated input high/low voltage is 20µA/0.6mA, and the rated output high/low voltage is 1.0mA/20mA.

  • PHILIPS BLF900-110; BLF900S-110 Base station LDMOS transistors handbook

    BLF900-110 and BLF900S-110 are two RF power amplifiers produced by Philips Semiconductors, suitable for GSM, EDGE and CDMA base stations and multicarrier applications in the 800 to 1000 MHz frequency range.

  • PHILIPS BLF861A UHF power LDMOS transistor handbook

    BLF861A is a UHF power LDMOS transistor produced by Philips Semiconductors. It features high power gain, easy power control, excellent ruggedness, designed to withstand abrupt load mismatch errors, source on underside eliminates DC isolators, reducing common mode inductance, designed for broadband operation (UHF band), and internal input and output matching for high gain and optimum broadband operation.

  • PHILIPS BLF861 UHF power LDMOS transistor handbook

    This is a high power gain, easy power control, rugged LDMOS transistor, suitable for UHF frequency band communication transmitter applications.

  • PHILIPS BLF647 UHF power LDMOS transistor handbook

    The BLF647 is a high power LDMOS transistor produced by Philips. It has high power gain, easy power control, excellent ruggedness, and a source on the underside that eliminates DC isolators and reduces common-mode inductance. It is designed for broadband operation (HF to 800 MHz).

  • PHILIPS BLF548 handbook

    BLF548 is a UHF push-pull power MOS transistor produced by Philips company, which features high power gain, easy power control, good thermal stability, gold metallization ensures excellent reliability and broadband operation.

  • PHILIPS BLF547 handbook

    BLF547 is a UHF push-pull power MOS transistor produced by Philips. It has high power gain, easy power control, good thermal stability and excellent reliability.