Philips Manuals - Page 103

Philips manuals, page 103

• PHILIPS 80C652/83C652 handbook

  This document is about the specification of 80C652/83C652 microcontrollers, including product functions, pin descriptions, register descriptions, etc.

• PHILIPS 80C851/83C851 handbook

  80C851/83C851 is a high-performance microcontroller fabricated with Philips high-density CMOS technology. It has 8-bit CPU, 4k × 8 ROM, 128 × 8 RAM, 256 × 8 EEPROM, 32 I/O pins, two 16-bit counters/timers, seven-source, five vector, two-priority level nested interrupt structure, serial I/O port, on-chip oscillator and clock circuits.

• philips TDA933xH series I2 C-bus controlled TV display processors handbook

  The TDA933xH series is a TV display processor controlled by the I2C bus, which can be used in both single scan (50 or 60 Hz) and double scan (100 or 120 Hz) applications.

• philips 74LVC86A Quad 2-input exclusive OR gate handbook

  74LVC86A is a low-voltage, low-power CMOS logic chip produced by Philips Semiconductors. It has a wide power supply range of 1.2V to 3.6V, supports 5.5V input voltage, and can also be used as a decoder in a mixed 3.3V/5V power supply environment.

• PHILIPS HD2060 Manual

  This is a user manual for the Philips HD2060 3 soy milk maker, which describes the features and functions of the product, as well as instructions for use, cleaning, and maintenance.

• PHILIPS SAA5250 handbook

  The SAA5250 is a CMOS Interface for Data Acquisition and Control (CIDAC) designed for use in conjunction with the Video Input Processor (SAA5230) in a multi-standard teletext decoder.

• Philips Semiconductor PHD3N20L handbook

  PHD3N20L is a logic level field-effect power transistor produced by Philips Semiconductors. Its maximum drain-source voltage is 200V, maximum drain current is 3.5A, and maximum total power dissipation is 50W. This product is suitable for switched mode power supplies (SMPS), motor control circuits and general purpose switching applications.

• PHILIPS PDTC114TK Manual

  The PDTC114TK is an NPN type transistor manufactured by Philips Semiconductors. It has an internal bias resistor R1, which can simplify circuit design and reduce components and board space. It is suitable for space-saving applications in interface and driver circuits.

• PHILIPS PCK2509SL Manual

  The PCK2509SL is a high-performance, low-skew, low-jitter, phase-locked loop (PLL) clock driver. It uses a PLL to precisely align, in both frequency and phase, the feedback (FBOUT) output to the clock (CLK) input signal.

• philips P83Cx80; P87C380 Microcontrollers for monitors with DDC interface auto-sync detection sync proc handbook

  This document describes the features and characteristics of the P83Cx80 and P87C380 microcontrollers, which are designed for monitors with DDC interface, auto-sync detection, and sync processing.

• Philips Semiconductors NE527 handbook

  NE527 is a product manual from Philips Semiconductors. It is a high-precision analog voltage comparator with 15ns propagation delay, complementary output gates, TTL or ECL compatible outputs, wide common-mode and differential voltage range, and 5000 typical gain.

• PHILIPS MZ0912B50Y NPN microwave power transistor handbook

  MZ0912B50Y is a NPN microwave power transistor produced by Philips. It features high emitter efficiency, excellent common-mode rejection ratio (CMRR), low thermal resistance, and is suitable for pulse power amplifiers from 960 to 1215 MHz.

• philips HD7816 HD7814 HD7812 HD7811 HD7810 Coffee Machine Manual

  With SENSEO, you can enjoy a perfect cup of coffee with a delicious crema layer whenever you feel like it. Each cup is freshly brewed, so you’re always sure of a pure and round taste. SENSEO combines a unique brewing method from Philips with convenient coffee pods from Douwe Egberts, available in different blends of fine roast and ground coffee. Together they make sure you only get the very best in flavour and aroma from the coffee. To optimize the taste of the coffee, keep the following aspects in mind: Fresh water, fresh coffee pods, and a clean machine.

• PHILIPS 87LPC762 Low power low price low pin count (20 pin) microcontroller with 2 kbyte OTP handbook

  87LPC762 is a low-power, low-cost, low-pin count (20 pin) microcontroller with 2 kbyte OTP. This document is a preliminary specification for this product

• PHILIPS ISP1761 Manual

  The ISP1761 is a single-chip Hi-Speed Universal Serial Bus (USB) On-The-Go (OTG) Controller integrated with the advanced Philips Slave Host Controller and the Philips ISP1582 Peripheral Controller. The Hi-Speed USB Host Controller and Peripheral Controller comply to Universal Serial Bus Specification Rev. 2.0 and support data transfer speeds of up to 480 Mbit/s. The Enhanced Host Controller Interface (EHCI) core implemented in the Host Controller is adapted from Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 1.0. The OTG controller is compliant with On-The-Go Supplement to the USB Specification Rev. 1.0a. The ISP1761 has three USB ports. Port 1 can be configured to function as a downstream port, an upstream port or an OTG port; ports 2 and 3 are always configured as downstream ports. The OTG port can switch its role from host to peripheral, and peripheral to host. The OTG port can become a host through the Host Negotiation Protocol (HNP) as specified in the OTG supplement.

Philips manuals by category