Philips manuals, page 88
PHILIPS 74HC04; 74HCT04 Hex inverter handbook
This document describes the features and characteristics of the 74HC04 and 74HCT04 high-speed Si-gate CMOS devices. They provide six inverting buffers and comply with JEDEC standards. The products operate in temperature ranges of -40 to +85°C and -40 to +125°C, and have ESD protection.
PHILIPS 74HC/HCT7030 9-bit x 64-word FIFO register; 3-state handbook
The 74HC/HCT7030 is a 9-bit x 64-word FIFO register with 3-state outputs, supporting synchronous or asynchronous operation.
PHILIPS 74HC/HCT73 Dual JK flip-flop with reset; negative-edge trigger handbook
PHILIPS 74HC/HCT74 Dual D-type flip-flop with set reset; positive-edge trigger handbook
The 74HC/HCT74 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT74 are dual positive-edge triggered, D-type flip-flops with individual data (D) inputs, clock (CP) inputs, set (SD) and reset (RD) inputs; also complementary Q and Q outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. Information on the data input is transferred to the Q output on the LOW-to-HIGH transition of the clock pulse. The D inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. Schmitt-trigger action in the clock input makes the circuit highly tolerant to slower clock rise and fall times.
PHILIPS 74HC/HCT75 Quad bistable transparent latch handbook
74HC/HCT75 Quad bistable transparent latch
PHILIPS 74HC/HCT7540 Octal Schmitt trigger buffer/line driver; 3-state; inverting handbook
PHILIPS 74HC/HCT7541 Octal Schmitt trigger buffer/line driver; 3-state handbook
The 74HC/HCT7541 is a high-performance Si-gate CMOS device that is pin compatible with low power Schottky TTL (LSTTL) and is specified in compliance with JEDEC standard no. 7A. It is an octal Schmitt trigger non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs OE1 and OE2. A HIGH on OEn causes the outputs to assume a high impedance OFF-state. The Schmitt trigger action in the data inputs transforms slowly changing input signals into sharply defined jitter-free output signals.
PHILIPS 74HC/HCT7731 Quad 64-bit static shift register handbook
74HC/HCT7731 is a high-speed, single-pole, static shift register with recycling mode. Each register has independent data input pins Da to Dd, clock input pins CPa to CPd, and data output pins Qa to Qd. When the clock pulse changes from low to high, the data is shifted one place to the output end. Each recycling mode input controls two registers, RECab controls registers A and B, and RECcd controls registers C and D. When the REC input is high, the device is in the recycling mode and the data at the output end is shifted back to the input end of the register. This makes the data continuously repeated 64 times.
PHILIPS 74HC/HCT85 4-bit magnitude comparator handbook
This data sheet is for 74HC/HCT85 4-bit magnitude comparator
PHILIPS 74HC/HCT86 Quad 2-input EXCLUSIVE-OR gate handbook
74HC/HCT86 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT86 provide the EXCLUSIVE−OR function.
PHILIPS 74HC/HCT9114 Nine wide Schmitt trigger buffer; open drain outputs; inverting handbook
This document describes the features and characteristics of the 74HC/HCT9114 product, including Schmitt trigger action, output capability, logic family specifications, etc.
philips 74HC/HCT93 4-bit binary ripple counter handbook
This document describes the features and characteristics of the 74HC/HCT93 4-bit binary ripple counter, including various counting modes, asynchronous master reset, etc.
philips 74HC245 74HCT245 Octal bus tranceiver 3-state handbook
The 74HC245; 74HCT245 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC245; 74HCT245 is an octal transceiver featuring non-inverting 3-state bus compatible outputs in both send and receive directions. The 74HC245; 74HCT245 features an output enable input (OE) for easy cascading and a send/receive input (DIR) for direction control. OE controls the outputs so that the buses are effectively isolated. The 74HC245; 74HCT245 is similar to the 74HC640; 74HCT640 but has true (non-inverting) outputs.
philips 74HC/HCT574 Octal D-type flip-flop positive edge-trigger 3-state handbook
This document describes the features and characteristics of the 74HC/HCT574 octal D-type flip-flop with positive edge-trigger and 3-state non-inverting outputs for bus oriented applications.
philips 74HC/HCT594 8-bit shift register with output register handbook
The 74HC/HCT594 is an 8-bit shift register with output register. Its features are synchronous serial input and output, 8-bit parallel output, shift and storage register have independent direct clear and clocks, 100 MHz (typ.), output capability: – parallel outputs: bus driver – serial outputs: standard, ICC category: MSI, applications: serial-to parallel data conversion, remote control holding register.