Philips manuals, page 28
PHILIPS BFQ161 handbook
This document describes the features and characteristics of the BFQ161 NPN video transistor, including low output capacitance, high gain bandwidth, high current applicability, good thermal stability, and gold metallization for excellent reliability. The transistor is suitable for use as a pre-stage driver in high resolution color graphics monitors.
PHILIPS BFQ151 handbook
BFQ151 is a PNP video transistor with high gain bandwidth and good thermal stability. Gold metallization ensures excellent reliability. It is mainly used as a pre-stage driver between video amplifier and video module.
PHILIPS BFQ149 handbook
BFQ149 is a PNP type 5GHz wideband transistor manufactured by Philips. It is widely used in UHF applications such as broadband aerial amplifiers (30 to 860 MHz) and microwave amplifiers such as radar systems, spectrum analyzers, etc.
PHILIPS BFQ136 handbook
BFQ136 is a high-performance NPN 4GHz wideband transistor with extremely high output voltage capabilities and is primarily intended for use in the final stages of UHF amplifiers.
PHILIPS BFQ135 handbook
The BFQ135 is a NPN 6.5 GHz wideband transistor manufactured by Philips Semiconductors. It features optimum temperature profile and excellent reliability properties.
Philips Semiconductors 8-input multiplexer (3-State) 74F251A Manual
74F251A is a 8-input multiplexer (3-State) produced by Philips Semiconductors. It has high speed, multifunction and other characteristics. Its outputs have open drain properties. When OE is high, the output enters high impedance state and can be connected to a common bus.
PHILIPS 74F253 handbook
The 74F253 is a 4-bit dual multiplexer with 3-state outputs produced by PHILIPS. It can be used for bus interface and multiplex expansion. Its features include 3-state output, common select input and independent output enable input.
PHILIPS 74F245 handbook(1)
The 74F245 is an octal transceiver featuring non-inverting 3-State bus compatible outputs in both transmit and receive directions. The B port outputs are capable of sinking 64mA and sourcing 15mA, producing very good capacitive drive characteristics. The device features an Output Enable (OE) input for easy cascading and Transmit/Receive (T/R) input for direction control. The 3-State outputs, B0–B7, have been designed to prevent output bus loading if the power is removed from the device.
PHILIPS 74F245 handbook
The 74F245 is an octal transceiver from Philips with non-inverting 3-State bus compatible outputs that can be used for both transmit and receive. The B port outputs are capable of sinking 64mA and sourcing 15mA.
PHILIPS 74F242/74F243 handbook
The document describes the features and characteristics of the 74F242 and 74F243 quad transceivers. The 74F242 is an inverting (3-state) transceiver, while the 74F243 is a non-inverting (3-state) transceiver. The document also includes pin configuration, ordering information, input and output loading and fan-out table, and logic symbols.
PHILIPS 74F240/74F240A/74F241/74F241A handbook
This document describes the features and characteristics of four products: 74F240/74F240A and 74F241/74F241A. They are octal buffers that are ideal for driving bus lines of buffer memory address registers. The outputs have three-state buffer function and can sink 64mA of current and source 15mA of current. The 74F240A/74F241A have guaranteed output skew within 2.0ns, reduced ground bounce and power consumption, and reduced loading.
PHILIPS 74F2373 handbook
74F2373 is an octal transparent latch with 30 Ohm equivalent output termination (3-State) for driving DRAM.
PHILIPS 74F225 handbook
This document describes the features and characteristics of the Philips Semiconductors 74F225 16X5 asynchronous FIFO product, including independent synchronous inputs and outputs, organized as 16 words of 5 bits, DC to 25MHz data rate, and 3-state outputs.
Philips Semiconductors 16 × 4 Synchronous FIFO (3-State) 74F224 Manual
The 74F224 is a Philips Semiconductors product. It is a 16 × 4 Synchronous FIFO with independent synchronous inputs and outputs, organized as 16 words of 4 bits each, with DC to 50MHz data rate, 3-State outputs, and is cascadable in word-width and depth direction.
PHILIPS 74F2245 handbook
This datasheet details the features and characteristics of the 74F2245 chip, including the eight-way bidirectional bus interface, the 30-ohm output terminator, and the high impedance state.