Philips manuals, page 32
PHILIPS CBTD3306 Dual bus switch with level shifting handbook
CBTD3306 is a dual bus switch produced by Philips Semiconductors. It features 5 ohms switch connection, TTL-compatible input levels, and internal diode. The switch is suitable for 5V to 3.3V level shifting applications. It has ESD protection of 2000V HBM and 1000V CDM.
PHILIPS CBTD3384 10-bit level shifting bus switch with 5-bit output enables handbook
The CBTD3384 is a 10-bit level shifting bus switch with 5-bit output enables from PHILIPS Semiconductors. It supports 5V to 3.3V level shifting and has low on-state resistance and low propagation delay.
PHILIPS CBTD16212 24-bit level shifting bus exchange switch with 12-bit output enables handbook
CBTD16212 is a 24-bit level shifting bus exchange switch with 12-bit output enables. It provides a 5Ω switch connection between two ports and is designed for level shifting applications. The product has a latch-up testing exceeding 100mA, ESD protection exceeding 1500V HBM and 1000V CDM. It offers 24 bits of high-speed TTL-compatible bus switching or exchanging with minimal propagation delay. The CBTD16212 also integrates a diode to allow for level shifting between 5V inputs and 3.3V outputs. It can operate as a 24-bit bus switch or a 12-bit bus exchanger, enabling data exchanging between the four signal ports via the data-select (S0-S2) terminals.
PHILIPS CBTD16210 20-bit level shifting bus switch with 10-bit output enables handbook
The CBTD16210 is a 20-bit level shifting bus switch from Philips Semiconductors. It is available in SSOP and TSSOP packages and is designed for use in 5.5 V to 3.3 V level shifting applications.
PHILIPS CBT6832E 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs Schottky undershoot protection for live insertion handbook
CBT6832E is a 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs and Schottky undershoot protection for live insertion. It features low propagation delay, controlled enable rate, and other characteristics.
PHILIPS CBT6832D 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs charge pump undershoot protection for live insertion handbook
The CBT6832D is a 16-bit controlled enable rate 1-of-2 multiplexer/demultiplexer with precharged outputs and charge pump undershoot protection for live insertion.
PHILIPS CBT6832C 16-bit 1-of-2 multiplexer/demultiplexer with precharged outputs charge pump undershoot protection for live insertion handbook
This document describes the features and characteristics of the CBT6832C 16-bit 1-of-2 multiplexer/demultiplexer with precharged outputs and charge pump undershoot protection for live insertion.
PHILIPS CBT6832 16-bit 1-of-2 multiplexer/demultiplexer with precharged outputs Schottky undershoot protection for live insertion handbook
The CBT6832 is a 16-bit 1:2 multiplexer/demultiplexer with precharged outputs and Schottky protection for live insertion from Philips Semiconductors.
PHILIPS CBT6820 20-bit bus switch with precharged outputs Schottky undershoot protection for live insertion handbook
The CBT6820 is a 20-bit bus switch with precharged outputs and Schottky undershoot protection for live insertion. It features TTL compatible inputs and outputs, a 5Ω switch connection between port A and port B, and thin shrink small outline (TSSOP). Undershoot protection is included to prevent shoot through level changes, and the device precharges the B port to a user-selectable bias voltage (BIASV) to minimize signal distortion during live insertion. It is organized as two 10-bit switches with individual enable (OE) input. When OE is low, the switch is on and port A is connected to port B. When OE is high, the switch between port A and port B is open and the B port is precharged to BIASV through the equivalent of a 10-kΩ resistor. Special clamp circuitry and Schottky diode clamps to ground are used to prevent an under voltage on the A side (Vin < GND) from causing the B side precharge voltage to drop below the ‘‘1” state.
PHILIPS CBT6810 10-bit bus switch with precharged outputs Schottky undershoot protection for live insertion handbook
The CBT6810 is a 10-bit bus switch with precharged outputs and Schottky undershoot protection for live insertion from Philips Semiconductors. The features of this switch include a 5-ohm switch connection between port A and port B, TTL-compatible input and output levels, undershoot protection to prevent shoot-through level changes, and bias voltage pre-charging the outputs to minimize signal distortion during live insertion.
PHILIPS CBT6800 10-bit bus switch with precharged outputs for live insertion handbook
This product is a 10-bit bus switch with precharged outputs for live insertion
PHILIPS CBT3857 10-bit bus switch with 10 k pull-down termination resistors handbook
The CBT3857 is a 10-bit bus switch with 10 kOhm pull-down termination resistors. This switch is designed for 3 V to 3.6 V VCC operation and SSTL_2 output enable (OE) input levels. When OE is low, the switch is on and port A is connected to port B. When OE is high, the switch is open, and a high-impedance state exists between the two ports. The switch's low on-state resistance allows connections to be made with minimal propagation delay. The CBT3857 is characterized for operation from 0°C to +85°C.
PHILIPS CBT3384 10-bit bus switch with 5-bit output enables handbook
CBT3384 is a 10-bit high-speed TTL-compatible bus switch from PHILIPS. It has a 5-ohm switch connection and TTL-compatible control inputs and output levels.
PHILIPS CBT3306 Dual bus switch handbook
The CBT3306 is a dual bus switch produced by Philips, which has features such as 5Ω switch connection, TTL-compatible input levels, plastic small outline (SO) and thin shrink small outline (TSSOP) package options, over 100mA latch-up protection and over 2000V HBM ESD protection.
PHILIPS CBT3257 Quad 1-of-2 multiplexer/demultiplexer handbook
The CBT3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer