Philips manuals, page 104
PHILIPS ISP1760 handbook
This document introduces the ISP1760 USB Host Controller, which is a generic processor interface that supports high/full/low-speed transfer modes and can connect three different devices.
PHILIPS ISP1582 Manual
The ISP1582 is a cost-optimized and feature-optimized Hi-Speed Universal Serial Bus (USB) peripheral controller. It fully complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at high-speed (480 Mbit/s) and full-speed (12 Mbit/s).
PHILIPS ISP1581 Universal Serial Bus 2.0 high-speed interface device handbook
The ISP1581 is a cost-optimized and feature-optimized Universal Serial Bus (USB) interface device, which fully complies with the Universal Serial Bus Specification Rev. 2.0. It provides high-speed USB communication capacity to systems based on a microcontroller or microprocessor. The ISP1581 communicates with the system’s microcontroller/processor through a high-speed general-purpose parallel interface. The ISP1581 supports automatic detection of USB 2.0 system operation. The USB 1.1 fall-back mode allows the device to remain operational under full-speed conditions. It is designed as a generic USB interface device so that it can fit into all existing device classes, such as: Imaging Class, Mass Storage Devices, Communication Devices, Printing Devices and Human Interface Devices. The internal generic DMA block allows easy integration into data streaming applications. In addition, the various configurations of the DMA block are tailored for mass storage applications. The modular approach to implementing a USB interface device allows the designer to select the optimum system microcontroller from the wide variety available. The ability to re-use existing architecture and firmware investments shortens the development time, eliminates risk and reduces costs. The result is fast and efficient development of the most cost-effective USB peripheral solution.
PHILIPS ISP1563 Manual
PHILIPS ISP1562 Manual
This document mainly introduces the overview, function introduction, application scenarios, technical features and application examples of ISP1562.
PHILIPS ISP1561 Hi-Speed USB PCI host controller service manual
The ISP1561 is a PCI-based, single-chip Universal Serial Bus (USB) Host Controller. It integrates two Original USB Open Host Controller Interface (OHCI) cores, one Hi-Speed USB Enhanced Host Controller Interface (EHCI) core and four transceivers that are compliant with Hi-Speed USB and Original USB. The functional parts of the ISP1561 are fully compliant with Universal Serial Bus Specification Rev. 2.0, Open Host Controller Interface Specifications Rev. 1.0a, Enhanced Host Controller Interface Specification for Universal Serial Bus Rev. 0.95, PCI Local Bus Specification Rev. 2.2 and PCI Bus Power Management Interface Specification Rev. 1.1. The integrated high performance USB transceivers enable the ISP1561 to handle all Hi-Speed USB transfer speed modes: high-speed (480 Mbit/s), full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1561 provides four downstream ports that enables simultaneous connections of USB devices at different speeds. The ISP1561 provides three downstream port status indicators—GoodLink™ along with green and amber LEDs—to allow user-rich messages of the Root Hub downstream ports status, without requiring detailed port information to be reflected in the internal registers. The ISP1561 is fully compatible with various operating system drivers, such as Microsoft® Windows® standard OHCI and EHCI drivers that are present in Windows 98 Second Edition (SE)
PHILIPS ISP1521 Manual
ISP1521 is a USB hub controller IC from ISP that supports high, full, and low speed transmission.
PHILIPS ISP1520 Hi-Speed Universal Serial Bus hub controller service manual
ISP1520 is a USB 2.0 high-speed hub controller chip from ISP company, supports high-speed, full-speed and low-speed data transmission, can be connected to USB host or hub.
PHILIPS ISP1501 Hi-Speed Universal Serial Bus peripheral transceiver service manual
ISP1501 is a USB peripheral high-speed transceiver chip of ISP company, which supports USB2.0 standard, has parallel to serial converter and serial to parallel converter, supports 12MHz crystal, has 3.3V and 5V digital input interface
PHILIPS ISP1362 Single-chip Universal Serial Bus On-The-Go controller service manual
The ISP1362 is a single-chip Universal Serial Bus (USB) On-The-Go (OTG) controller integrated with the advanced Philips Slave Host Controller (PSHC) and the Philips ISP1181B Device Controller (DC). The USB OTG controller is compliant with On-The-Go Supplement to the USB 2.0 Specification Rev. 1.0a. The host and device controllers are compliant with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s). The ISP1362 has two USB ports: port 1 and port 2. Port 1 can be hardware configured to function as a downstream port, an upstream port or an OTG port whereas port 2 can only be used as a downstream port. The OTG port can switch roles from host to peripheral, or from peripheral to host. The OTG port can become a host through the Host Negotiation Protocol (HNP) as specified in the OTG supplement. A USB product with OTG capability can function either as a host or as a peripheral. For instance, with this dual-role capability, a Personal Computer (PC) peripheral such as a printer may switch roles from a peripheral to a host for connecting to a digital camera so that the printer can print pictures taken by the camera without using a PC. When a USB product with OTG capability is inactive, the USB interface is turned off. This feature has made OTG a technology well-suited for use in portable devices.
PHILIPS ISP1301 Manual
The ISP1301 is a USB OTG transceiver that complies with USB 2.0 and USB OTG 1.0a specifications, supports full-speed (12Mbit/s) and low-speed (1.5Mbit/s) data rates. It is ideal for use in portable electronics devices such as mobile phones, digital still cameras, digital video cameras, Personal Digital Assistants (PDAs) and digital audio players.
Philips ISP1183 Low-power Universal Serial Bus interface device with DMA Product data
ISP1183 is a low-power Universal Serial Bus interface device with DMA. It complies with Universal Serial Bus Specification Rev. 2.0, supporting full-speed data transfer (12 Mbit/s). It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems.
PHILIPS ISP1181B Full-speed Universal Serial Bus peripheral controller service manual
ISP1181B is a USB peripheral controller from ISP company, supports full-speed data transfer (12Mbit/s), can be applied to many personal computer peripherals, such as printers, communication devices, scanners, external storage (Zip® drive) devices and digital still cameras.
PHILIPS ISP1181A Full-speed Universal Serial Bus peripheral controller service manual
The ISP1181A is a Universal Serial Bus (USB) peripheral controller that complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s). It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems. The ISP1181A communicates with the system’s microcontroller or microprocessor through a high-speed general-purpose parallel interface. The ISP1181A supports fully autonomous, multi-configurable Direct Memory Access (DMA) operation. The modular approach to implementing a USB peripheral controller allows the designer to select the optimum system microcontroller from the wide variety available. The ability to reuse existing architecture and firmware investments shortens development time, eliminates risks and reduces costs. The result is fast and efficient development of the most cost-effective USB peripheral solution. The ISP1181A is ideally suited for application in many personal computer peripherals such as printers, communication devices, scanners, external mass storage (Zip® drive) devices and digital still cameras. It offers an immediate cost reduction for applications that currently use SCSI implementations.
PHILIPS ISP1181 Full-speed Universal Serial Bus interface device service manual
The ISP1181 is a Universal Serial Bus (USB) interface device which complies with Universal Serial Bus Specification Rev. 1.1. It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems. The ISP1181 communicates with the system’s microcontroller or microprocessor through a high-speed general-purpose parallel interface. The fully autonomous Direct Memory Access (DMA) operation - auto download, auto repeat, auto execution - removes the need for the device to re-enable or re-initialize the DMA operation every time. The modular approach to implementing a USB interface device allows the designer to select the optimum system microcontroller from the wide variety available. The ability to re-use existing architecture and firmware investments shortens development time, eliminates risks and reduces costs. The result is fast and efficient development of the most cost-effective USB peripheral solution. The ISP1181 is ideally suited for application in many personal computer peripherals, such as printers, scanners, external mass storage (zip drive) devices and digital still cameras. It offers an immediate cost reduction for applications that currently use SCSI implementations.