Philips manuals, page 105
Philips ISP1161A1 Universal Serial Bus single-chip host device controller Product data
The ISP1161A1 is a single-chip Universal Serial Bus (USB) Host Controller (HC) and Device Controller (DC), which complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
PHILIPS ISP1161A Manual
ISP1161A is a single-chip USB host controller and device controller produced by ISP company. It complies with USB 2.0 standard, supports full-speed and low-speed transmission, and also has two downstream interfaces and one upstream interface, which can be connected to any USB-compliant device and hub.
PHILIPS ISP1161 Full-speed Universal Serial Bus single-chip host device controller service manual
The ISP1161 is a single-chip Universal Serial Bus (USB) Host Controller (HC) and Device Controller (DC) that complies with Universal Serial Bus Specification Rev 1.1. It provides two downstream ports for the USB HC and one upstream port for the USB DC. It has separate interrupt request output pins, DMA channels, and wakeup input pins, suitable for connecting USB devices and hosts.
PHILIPS ISP1160 Embedded Universal Serial Bus Host ControllerManual
PHILIPS ISP1130 Universal Serial Bus compound hub with integrated keyboard controller Manual
The ISP1130 integrates a Universal Serial Bus (USB) hub with a keyboard controller into a single chip, which complies with Universal Serial Bus Specification Rev. 1.1 and the USB Device Class Definition for Human Interface Devices (HID). The hub has 1 to 2 downstream ports and 1 to 3 non-removable embedded functions, one of which is dedicated to the keyboard operation. The hub controller is fully implemented in hardware, ensuring a fast response to host requests. The integrated 5V to 3.3V regulator allows direct connection to the USB power supply VBUS. The downstream ports are either bus-powered or hybrid-powered and can interface low-power USB devices such as a joystick or a mouse. ISP1130 uses SoftConnect™ technology to connect to the USB host upon detection of VBUS. The low power consumption in 'suspend' mode allows easy design of equipment that is compliant with the ACPI™, OnNow™ and USB power management requirements. The integrated keyboard controller is based on the 80C51 family and has 8KB of mask ROM and 256 bytes of data RAM. The code memory is protected against reading by an external device. A built-in watchdog timer resets the device in case of a microcontroller hang-up. To reduce power consumption, the microcontroller can be put in sleep mode or power-down mode. A serial I2C-bus interface is provided for optional.
Philips ISP1123 Universal Serial Bus compound hub Preliminary speci cation
The ISP1123 is a USB 1.1 compliant compound Universal Serial Bus (USB) hub device. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator.
PHILIPS ISP1122A Universal Serial Bus stand-alone hub service manual
ISP1122A is a stand-alone Universal Serial Bus (USB) hub device which complies with USB Specification Rev. 1.1. It integrates a Serial Interface Engine (SIE), hub repeater, hub controller, USB data transceivers and a 3.3 V voltage regulator.
philips ISP1122 Universal Serial Bus stand-alone hub User Guide
ISP1122 is a USB hub device from ISP company, supports 2 to 5 downstream ports, has low power consumption and can be powered by bus, self-powered or hybrid-powered
philips ISP1109 Universal Serial Bus transceiver with carkit support User Guide
ISP1109 is a USB transceiver device that supports CEA−936−A, Mini-USB Analog Carkit Interface. It is fully compliant with Universal Serial Bus Specification Rev. 2.0. The ISP1109 can transmit and receive serial data at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates. The ISP1109 is available in HVQFN32 package.
philips ISP1105/1106/1107 Advanced Universal Serial Bus transceivers User Guide
The ISP1105/1106/1107 range of Universal Serial Bus (USB) transceivers are fully compliant with the Universal Serial Bus Specification Rev. 1.1. They are ideal for portable electronics devices such as mobile phones, digital still cameras, Personal Digital Assistants (PDA) and Information Appliances (IA). They allow USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the Universal Serial Bus. They have an integrated 5 V to 3.3 V voltage regulator for direct powering via the USB supply VBUS. The ISP1105/1106/1107 range can be used as a USB device transceiver or a USB host transceiver. They can transmit and receive serial data at both full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s) data rates.
PHILIPS ISP1104 Advanced Universal Serial Bus transceiver Manual
The ISP1104 Universal Serial Bus (USB) transceiver is compliant with the Universal Serial Bus Specification Rev. 2.0. It can transmit and receive USB data at full-speed (12 Mbit/s). It allows single and differential input modes selectable by a MODE input. It allows USB Application Specific Integrated Circuits (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 V to 3.6 V to interface with the physical layer of the USB. It has an integrated 5 V-to-3.3 V voltage regulator for direct powering via the USB supply line VBUS. It has an integrated voltage detector to detect the presence of the VBUS line voltage (VCC(5.0)). When VBUS (VCC(5.0)) is lost, the D+ and D− pins can be shared with other serial protocols. The ISP1104 is available in HBCC16 package. The ISP1104 is ideal for use in portable electronic devices, such as mobile phones, digital still cameras, personal digital assistants and information appliances.
PHILIPS ISP1103 Universal Serial Bus transceiver Manual
This document provides a detailed introduction of the ISP1103 USB transceiver, including supported transmission rates and data formats.
philips ISP1102 Advanced Universal Serial Bus transceiver User Guide
The ISP1102 Universal Serial Bus (USB) transceiver is fully compliant with the Universal Serial Bus Specification Rev. 2.0. It can transmit and receive USB data at full-speed (12 Mbit/s). The transceiver allows USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65 to 3.6 V to interface with the physical layer of the USB. It has an integrated 5 V-to-3.3 V voltage regulator for direct powering via the USB supply line VBUS. The transceiver has an integrated voltage detector to detect the presence of the VBUS voltage (VCC(5.0)). When VCC(5.0) or Vreg(3.3) is lost, the D+ and D- pins can be shared with other serial protocols. The transceiver is a bi-directional differential interface and is available in HBCC16 and HVQFN14 packages. It is ideal for use in portable electronic devices, such as mobile phones, digital still cameras, personal digital assistants and information appliances.
PHILIPS 80C31/80C32 handbook
This datasheet introduces the features of 80C31/32 80C51 8-bit microcontroller family, including ROMless, low voltage (2.7 V–5.5 V), low power, high speed (33 MHz).
Philips 755-759 Manual
Philips 755 user manual, introduces the basic functions and operating methods of the mobile phone, including power on and off, making phone calls, receiving phone calls, viewing contacts, etc.