Key facts
- Manuals
- 2,046
- Models
- 676
- Categories
- 4
- Languages
- EN · ZH
- Last added
- 2026-10-03
Texas Instruments models by category
Featured Texas Instruments manuals

Texas Instruments AN058 Antenna Selection Guide Application Note
The document introduces the most important antenna parameters for short‑range device (SRD) designs, such as radiation pattern, gain, impedance matching, bandwidth, size and cost. It also covers basic antenna theory, the Friis transmission equation, and practical measurement techniques.
It then reviews the main antenna families—PCB, chip, whip and wire antennas—detailing their pros and cons, typical cost, and design trade‑offs. Reference designs, additional resources, and a list of antenna suppliers are provided for engineers needing ready‑made solutions or further guidance.
Covers: Introduction · Brief Antenna Theory · Antenna Types · Antenna Parameters · Antenna Measurements · Antenna Reference Designs

Texas Instruments OPA1622 Audio Operational Amplifier Data Sheet
OPA1622 is a dual‑channel, bipolar‑input audio operational amplifier designed for high‑fidelity applications. It provides ultra‑low input noise (2.8 nV/√Hz at 1 kHz), very low total harmonic distortion plus noise (–119 dB), a 32 MHz gain‑bandwidth product, and high output current capability.
The device operates from ±2 V to ±18 V, draws only 2.6 mA per channel in standby, supports capacitive loads over 600 pF, and includes a shutdown mode that reduces standby current below 5 µA. It is suited for headphone drivers, professional audio equipment, mixed‑signal consoles, audio test equipment, high‑end Blu‑ray players and A/V receivers. This manual is written in Chinese.
Covers: Features · Applications · Pin Configuration and Functions · Specifications · Absolute Maximum Ratings · Recommended Operating Conditions

Texas Instruments TMS320C24x DSP Controller Principles and Applications
This book introduces the fundamentals of digital signal processing (DSP) controllers, using the Texas Instruments TMS320C24x series as a reference model. It explains the chip’s structure, instruction set, addressing modes, and peripheral modules, and provides a complete development workflow including hardware setup, software tools, and experimental labs.
The text also details MATLAB‑based algorithm simulation, showing how to model and verify DSP algorithms before implementation. Practical experiments guide readers through interrupt programming, PWM generation, and other typical DSP applications, making the material suitable for undergraduate and graduate courses as well as engineers new to DSP development. This manual is written in Chinese.
Covers: 概述 · CPU结构和存储器配置 · 寻址方式与指令系统 · DSP开发环境 · 系统功能和其他功能模块 · 片内外设

Texas Instruments DRV8833 Dual H‑Bridge Motor Driver Datasheet
The DRV8833 from Texas Instruments provides two identical H‑bridge motor drivers with current‑control PWM circuitry. It can drive two DC brushed motors, a bipolar stepper motor, a solenoid or other inductive loads, delivering up to 1.5 A RMS (2 A peak) per bridge.
The device includes built‑in protection such as over‑current, over‑temperature, undervoltage lockout and a fault output pin. It also offers a low‑power sleep mode that disables the bridges and internal logic when nSLEEP is driven low. This manual is written in Chinese.
Covers: Features · Functional Description · Pin Configuration · Electrical Characteristics · Absolute Maximum Ratings · Recommended Operating Conditions
Latest Texas Instruments manuals
Texas Instruments AN058 Antenna Selection Guide Application Note
Application Note 36 pages · 1.2 MB · ENThis Texas Instruments application note explains key antenna parameters, types, and design considerations for short‑range device applications.
Texas Instruments OPA1622 Audio Operational Amplifier Data Sheet
Datasheet 37 pages · 2.5 MB · ZHThe OPA1622 is a dual‑channel, bipolar‑input audio op‑amp with ultra‑low noise, low THD+N, wide supply range and high output drive.
Texas Instruments TMS320C24x DSP Controller Principles and Applications
Other 30 pages · 1.1 MB · ZHA Chinese textbook covering the architecture, instruction set, development tools, and MATLAB simulation of the TMS320C24x DSP controller.
Texas Instruments DRV8833 Dual H‑Bridge Motor Driver Datasheet
Datasheet 22 pages · 963 KB · ZHThe DRV8833 is a dual H‑bridge motor driver that supports two DC motors or one stepper motor with up to 1.5 A RMS per bridge.
Texas Instruments TMS320 Family Development Support Reference Guide
User Manual 358 pages · 22.6 MB · ENReference guide providing information on TI TMS320 DSP family development support, including software, hardware tools, seminars, and documentation.
Texas Instruments DAC161P997-DIE Datasheet
Datasheet 5 pages · 226 KB · ZHThe Texas Instruments DAC161P997-DIE datasheet describes a 16‑bit single‑wire Δ‑Σ DAC with SWIF interface, specifications, packaging, and ordering information.
Texas Instruments TMS320F2837xD Microcontroller Technical Data Sheet
Datasheet 208 pages · 2.5 MB · ENThe datasheet provides specifications, features, pin configurations, and electrical characteristics for the Texas Instruments TMS320F2837xD dual‑core…
Texas Instruments MSP430 Series System Design and Practice
Other 7 pages · 13 KB · ZHA Chinese-language guide covering low‑power design, peripheral circuits, and software development for the MSP430 microcontroller series.
Texas Instruments MSP430FR2111/2110/2100/2000 Datasheet
Datasheet 83 pages · 1.7 MB · ZHThe Texas Instruments MSP430FR2111, MSP430FR2110, MSP430FR2100, and MSP430FR2000 datasheet provides specifications, features, pin configurations, and…
Texas Instruments SN74CBTLV3125 Quadruple FET Bus Switch Datasheet
Datasheet 22 pages · 913 KB · ENDatasheet for Texas Instruments SN74CBTLV3125 Quadruple FET Bus Switch, detailing specifications, ratings, and package options.
Texas Instruments DRV10983 BLDC Motor Driver Datasheet
Datasheet 59 pages · 2 MB · ZHThe DRV10983 is a three‑phase sensorless BLDC motor driver with integrated MOSFETs, supporting 8‑28 V input, up to 2 A continuous current, and I2C, PWM or…
Texas Instruments S2000 Reader Configuration Manual
User Manual 32 pages · 946 KB · ENThis manual explains how to install USB drivers and configure the Texas Instruments S2000 RFID reader using Windows HyperTerminal.
Texas Instruments KeyStone UART User Guide
User Manual 51 pages · 584 KB · ENGuide describing the features, architecture, registers, and operation of the KeyStone UART peripheral.
Texas Instruments CC3200-LAUNCHXL Getting Started Guide
User Manual 30 pages · 2.7 MB · ENA guide that walks you through setting up the CC3200‑LAUNCHXL board, installing software, and running the WLAN Station example.
Texas Instruments Professional Computer Technical Reference Manual
Programming Manual 303 pages · 13.7 MB · ENTechnical reference manual for the Texas Instruments Professional Computer, covering hardware components, system architecture, and programming details.
Which document do I need?
Application Note
How to use the product for one specific task, with worked examples.
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Programming Manual
Instruction set, parameters and examples for configuring or programming the device.
Questions answered in Texas Instruments manuals
What are the main antenna types for short‑range devices?
The most common types are PCB antennas, chip antennas, whip antennas with a connector, and wire antennas.
From: Texas Instruments AN058 Antenna Selection Guide Application Note
How does antenna size change with frequency?
Lowering the operating frequency increases the physical size of the antenna.
From: Texas Instruments AN058 Antenna Selection Guide Application Note
What is the supply voltage range of the OPA1622?
The OPA1622 can be powered from a single supply of 4 V to 36 V or from dual supplies of ±2 V to ±18 V.
From: Texas Instruments OPA1622 Audio Operational Amplifier Data Sheet
What is the input voltage noise density at 1 kHz?
The input voltage noise density is 2.8 nV/√Hz at 1 kHz.
From: Texas Instruments OPA1622 Audio Operational Amplifier Data Sheet
Which software is used for DSP development?
The CCS (Code Composer Studio) software is used for developing and debugging DSP applications.
From: Texas Instruments TMS320C24x DSP Controller Principles and Applications
Can MATLAB be used to simulate DSP algorithms?
Yes, MATLAB is introduced for algorithm simulation and can generate C code for the DSP.
From: Texas Instruments TMS320C24x DSP Controller Principles and Applications
