Texas Instruments manuals, page 6
TEXAS INSTRUMENTS TL103W TL103WA handbook
The TL103W and TL103WA combine the building blocks of a dual operational amplifier and a fixed voltage reference – both of which often are used in the control circuitry of both switch-mode and linear power supplies. The operational amplifier features low offset voltage, low supply current, unity gain bandwidth, etc. The voltage reference features a fixed 2.5V reference voltage, low temperature drift, wide output current range, etc.
TEXAS INSTRUMENTS TL103W TL103WA handbook(1)
The TL103W and TL103WA combine the building blocks of a dual operational amplifier and a fixed voltage reference - both of which are often used in the control circuitry of both switch-mode and linear power supplies. OPAMP1 has its noninverting input internally tied to a fixed 2.5-V reference, while OPAMP2 is independent, with both inputs uncommitted. For the A grade, especially tight voltage regulation can be achieved.
TEXAS INSTRUMENTS UC1823A UC2823A UC2823B UC3823A UC3823B UC1825A UC2825A UC2825B UC3825A UC3825B handbook(1)
TEXAS INSTRUMENTS UC1823A UC2823A UC2823B UC3823A UC3823B UC1825A UC2825A UC2825B UC3825A UC3825B handbook
This document introduces the improved versions of UC3823A and UC3823B and UC3825A and UC3825B family PWM controllers, which have improved performance, including higher switching frequency (up to 1MHz), shorter propagation delay (50ns), higher output current (2A peak) and lower startup current (100μA).
TEXAS INSTRUMENTS UC282-1 UC282-2 UC282-3 UC282-ADJ UC382-1 UC382-2 UC382-3 UC382-ADJ handbook
The document introduces the features and characteristics of the UC382 low-dropout linear regulator, including fast transient response, 10-mA to 3-A load current, short circuit protection, maximum dropout of 450-mV, separate bias and VIN pins, available in adjustable or fixed-output voltages, 5-pin package allows Kelvin sensing of load voltage and reverse current protection.
TEXAS INSTRUMENTS UC1709 UC2709 UC3709 handbook
Texas Instruments UC1526 UC2526 UC3526 handbook(1)
UC1526, UC2526 and UC3526 are high performance monolithic pulse width modulator circuits designed for fixed-frequency switching regulators and other power control applications.
Texas Instruments UC1526A UC2526A UC3526A handbook
UC1526A, UC2526A, and UC3526A are regulating pulse width modulator circuits with features including reduced supply current, oscillator frequency up to 600kHz, precision band-gap reference voltage, operating voltage range of 7V to 35V, dual 200mA source/sink outputs, minimum output cross-conduction, double-pulse suppression logic, under-voltage lockout, programmable soft-start, thermal shutdown, TTL/CMOS compatible logic ports, and 5V operation.
Texas Instruments UC1525B UC1527B UC2525B UC2527B UC3525B UC3527B handbook(1)
Texas Instruments UC1525B UC1527B UC2525B UC2527B UC3525B UC3527B handbook
Texas Instruments UC1526 UC2526 UC3526 handbook
The UC1526 is a high performance monolithic pulse width modulator circuit designed for fixed-frequency switching regulators and other power control applications. It includes a temperature compensated voltage reference, sawtooth oscillator, error amplifier, pulse width modulator, pulse metering and setting logic, and two low impedance power drivers. Protective features such as soft-start and under-voltage lockout, digital current limiting, double pulse inhibit, a data latch for single pulse metering, adjustable deadtime, and provision for symmetry correction inputs are also included. The UC1526 can be used to implement single-ended or push-pull switching regulators of either polarity, both transformerless and transformer coupled. It is characterized for operation over the full military temperature range of -55°C to +125°C.
TEXAS INSTRUMENTS ADS1232 ADS1234 handbook
The ADS1232 and ADS1234 are precision analog-to-digital converters with true 23.5-bit performance and exceptional ease of use. Selectable gains of 1, 2, 64, or 128 allow full-scale differential input ranges of ±2.5V to ±19.5mV. The ADS1232 offers a two-channel differential input and a built-in temperature sensor, while the ADS1234 features a four-channel differential input multiplexer. An on-board low-noise gain amplifier with low differential input current minimizes errors when using high-impedance transducers. The devices also feature a low current driver to accommodate different applications.
TEXAS INSTRUMENTS ADS1224 handbook
This data sheet describes the ADS1224's features, including 240SPS data rate, 4MHz clock, 20-bit effective resolution, four differential channels input multiplexer, pin-selectable, high-impedance input buffer, ±5V differential input range, 0.0003% INL (typ), 0.0015% INL (max), self-calibrating, simple 2-wire serial interface, on-chip temperature sensor, single conversions with standby mode, low current consumption: 300µA, analog supply: 2.7V to 5.5V, digital supply: 2.7V to 5.5V.
TEXAS INSTRUMENTS ADS1222 handbook
This datasheet provides detailed information about the ADS1222, including features, applications, and descriptions.
TEXAS INSTRUMENTS ADS1218 handbook
The ADS1218 is an 8-channel 24-bit analog-to-digital converter with 24 bits of no missing code performance and effective resolution of 22 bits. It can be communicated through the SPI interface.