AMD AM28F010 Manuals

ManualLib has 2 documents for the AMD AM28F010: 2 user manuals. Every file can be read online or downloaded as a PDF for free.

User Manual 2

Key facts

Brand
AMD
Model
AM28F010
Industry
Industrial
Documents
2
Languages
EN
Last added
2012-05-07

Start here

AMD Am28F010 Flash Memory Datasheet

AMD Am28F010 Flash Memory Datasheet

Datasheet 36 pages · 467 KB · EN

The Am28F010 is a 1 Megabit (128 K × 8‑bit) CMOS flash memory offered in 32‑pin PDIP, PLCC and TSOP packages. It provides high‑performance operation with a maximum access time of 70 ns, low power consumption (30 mA active, 100 pA standby) and latch‑up protection up to 100 mA.

The device supports in‑system electrical erase and programming using a 12.0 V + 5 % high‑voltage input. Typical chip‑erase time is under one second, while a byte can be programmed in about 10 µs and the whole chip in roughly two seconds. It is rated for at least 10 000 write/erase cycles and operates over commercial, industrial or extended temperature ranges.

Read online

AMD AM28F010 specifications

Memory Capacity1 Megabit (128 K × 8 bits)
Maximum Access Time70 ns
Active Current30 mA (max)
Standby Current100 pA (max)
Write/Erase Cycles≥ 10 000 cycles
Write Voltage12.0 V + 5 %
Latch‑up Protection100 mA from –1 V to VCC + 1 V
Typical Chip‑Erase Time< 1 s
Typical Byte‑Program Time10 µs
Typical Chip‑Program Time≈ 2 s
Operating Temperature (Commercial)0 °C to +70 °C
Operating Temperature (Industrial)-40 °C to +85 °C
Operating Temperature (Extended)-55 °C to +125 °C
Package Types32‑pin PDIP, PLCC, TSOP
Speed Options70 ns, 90 ns, 120 ns, 150 ns, 200 ns

Source: AMD Am28F010 Flash Memory Datasheet

All AMD AM28F010 documents by type

Datasheet 2

Ratings, dimensions and ordering codes, for selection and design work.

Questions answered in these manuals

What is the maximum access time of the Am28F010?

The maximum access time is 70 ns.

From: AMD Am28F010 Flash Memory Datasheet

How many write/erase cycles can the Am28F010 endure?

It is rated for at least 10 000 write/erase cycles.

From: AMD Am28F010 Flash Memory Datasheet

What is the typical programming time for a single byte?

The Am28F010 programs a byte in about 10 µs using the Flashrite™ algorithm.

From: AMD Am28F010 1 Megabit (128 K x 8-Bit) CMOS 12.0 Volt Bulk Erase Flash Memory

How many write/erase cycles can the Am28F010 endure?

The device is rated for a minimum of 10,000 write/erase cycles.

From: AMD Am28F010 1 Megabit (128 K x 8-Bit) CMOS 12.0 Volt Bulk Erase Flash Memory