Industrial

The 108Mbps Wireless Router Tl-WR642G is dedicated to Small Office/Home Office (SOHO) Wireless network solutions. It integrates the functions of Wireless Access Point, firewall, 4-port Switch and NAT-Router. It helps you set up a wired or wireless network, lets your computers share a high-speed DSL or Cable Internet connection, data files and other resources such as printers and hard disk storage space. The TL-WR642G complies with the IEEE 802.11g/b standards. In addition, it adopts 108 M Super G™ WLAN transmission technologies to support data transmission rates up to 108Mbps. It also adopts 2x to 3x eXtended Range™ WLAN transmission technology so that transmission distance is 2-3 times that of traditional 11g/b solutions, transmission range is extended to 4-9 times. It is compatible with all IEEE 802.11g and IEEE 802.11b products. With easy-to-use Quick Setup Wizard and plenty of functions, the TL-WR642G is your best choice to create a secure wireless network easily for your home and small office.

TP-LINK’S TL-POE10R PoE Receiver Adapter is a cost-saving and safe PoE adapter that fully complies with IEEE 802.3af standard, and can supply power and data for non-PoE devices, such as Wireless Access Points, IP Cameras or IP Phones, through an Ethernet cable. It supports 5V or 12V output power switching.

The TP-LINK ADSL2+ Modem (TD-8616) enables you to access a high-speed DSL Internet connection. It supports the latest ADSL2/2+ standards to provide higher performance (up to 24Mbps downstream) and longer reach from your Internet Service Provider’s (ISP) Digital Subscriber Line Access Multiplexer (DSLAM). You can also create a wired network to share your high-speed Internet connection by adding a multi-port router. The TD-8616 includes a simple configuration tool and a Web-based Graphic User Interface (GUI) that enables you to easily modify settings to connect to a DSL Internet service. The conveniently located LED indicators let you quickly check the modem's status and activity. Featuring high ADSL performance, easy-to-use, the TP-LINK TD-8616 is a good choice to access the internet.

TD-8817/TD-8817B is a TP-Link ADSL2+ router that supports up to 24Mbps downstream speed and Annex M, which can double upstream data rates.

TD-8811/TD-8811B is a TP-LINK ADSL2+ router that supports the latest ADSL2/2+ standards for speeds up to 24Mbps downstream and 3.5Mbps upstream. It also features 1 10/100 Ethernet port and 1 USB port, and a built-in QoS engine to help prioritize Internet traffic.

This document is about the packaging information of products JM38510/30109B2A, JM38510/30109BEA, JM38510/30109BFA, JM38510/30109SEA, JM38510/30109SFA, SN54LS109AJ, SN74109N, SN74LS109AD, SN74LS109ADE4, SN74LS109ADG4, SN74LS109ADR

This is a logic IC datasheet, which introduces the features and characteristics of HC112 and HCT112, including operating voltage range, input and output voltage range, output load capacity, operating temperature range, propagation delay and transition time.

The document describes the features and characteristics of the Harris Semiconductor SCHS140E, including asynchronous set and reset, Schmitt trigger clock inputs, maximum operating frequency, operating temperature range, etc.

The document describes the features and characteristics of the SCLS470A product, including wide operating voltage range, low input current, high-current outputs, low power consumption, etc. The product contains two independent J-K positive-edge-triggered flip-flops, which can function as flip-flops or toggle flip-flops.

This document describes the features and characteristics of the Harris Semiconductor SCHS134E chip, including hysteresis on clock inputs for improved noise immunity and increased input rise and fall times, asynchronous reset, complementary outputs, buffered inputs, etc.

The SN74ALS109A is a dual J-K positive-edge-triggered flip-flop from TI, with a maximum clock frequency of 50MHz and a power consumption of 6mW.

The SN74HC112 is a dual independent J-K negative edge-triggered flip-flop produced by Texas Instruments, with a working voltage range of 2V to 6V, output can drive 10 LSTTL loads, power consumption is 40µA maximum ICC, typical tpd is 13ns, ±4mA output drive at 5V, input current is 1µA maximum.

SN54F109 and SN74F109 are dual J-K positive-edge-triggered flip-flops with clear and preset functions

CD54ACT112, CD74ACT112 are two dual J-K negative-edge-triggered flip-flops with clear and preset functions produced by TI. This datasheet provides detailed information on the features and characteristics of the two products, pin functions, package types, supply voltages, working temperature ranges, application circuits, etc.

CD54ACT109 and CD74ACT109 are dual J-K positive-edge-triggered flip-flops with clear and preset functions. They have TTL-voltage compatible inputs, balanced propagation delays, and reduced power consumption.