Industrial

The 74HC/HCT374 is a high-performance Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A. The 74HC/HCT374 is an octal D-type flip-flop that features separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. A clock (CP) and an output enable (OE) input are common to all flip-flops. The 8 flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW-to-HIGH CP transition. When OE is LOW, the contents of the 8 flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state.

The 74AC574 • 74ACT574 is an octal D-type flip-flop with 3-STATE outputs. It features high speed, low power consumption, and inputs and outputs on opposite sides of the package.

The MAX3202E/MAX3203E/MAX3204E/MAX3206E are low-capacitance ±15kV ESD-protection diode arrays designed to protect sensitive electronics attached to communication lines.

The DS9503 is an ESD protection diode with high avalanche voltage, low leakage current and low capacitance, which avoids signal attenuation. It is compatible with all 5V logic families, uses a space-saving, low inductance TSOC surface mount package and has on-chip 5Ω resistors for isolation at both anode and cathode terminals. It also has an industrial temperature range.

SN54ABT534 and SN74ABT534A are eight-bit edge-triggered D-type flip-flops with 3-state outputs. They feature state-of-the-art EPIC-II B BiCMOS design, significantly reducing power dissipation. They have latch-up performance exceeding 500 mA per JEDEC standard, output ground bounce less than 1 V, high-drive outputs, ESD protection exceeding 2000 V, and various package options.

The MM74HC175 is a high-speed D-type flip-flop with clear function, utilizing advanced silicon-gate CMOS technology to achieve high noise immunity and low power consumption. It can drive 10 LS-TTL loads.

MC74AC74/74ACT74 is a dual D-type flip-flop with Asynchronous Clear and Set inputs and complementary (Q,Q) outputs

SN54AHC374, SN74AHC374 are octal edge-triggered D-type flip-flops with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs. A buffered output-enable (OE) input can be used to place the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly.

The 74LCX574 is a low voltage octal D-type flip-flop with 5V tolerant inputs and outputs produced by Fairchild Semiconductor Corporation.

CD74AC273 is the enhanced version of CD54AC273, which has faster transmission speed and lower power consumption. AC273 and ACT273 devices are octal D-type flip-flops with reset that utilize advanced CMOS logic technology. Information at the D input is transferred to the Q output on the positive-going edge of the clock pulse. All eight flip-flops are controlled by a common clock (CP) and a common reset (MR). Resetting is accomplished by a low voltage level independent of the clock.

SN54AHC574, SN74AHC574 are octal edge-triggered D-type flip-flops with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. These devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers. On the positive transition of the clock (CLK) input, the Q outputs are set to the logic levels of the data (D) inputs. A buffered output-enable (OE) input places the eight outputs in either a normal logic state (high or low) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance state output current consumption is very low, typically less than 100µA.

The 74AC74 • 74ACT74 is a dual D-type positive edge-triggered flip-flop with asynchronous clear and set inputs and complementary (Q, Q) outputs. It features reduced power consumption, high output source/sink capability, and TTL-compatible inputs.