This page provides manuals, user guides, handbooks, specifications, and maintenance instructions for Industrial. View online or download for free. Showing page 3686.
The 74AC74 is a high-performance CMOS dual D-type flip-flop with preset and clear functions. The device is fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology, which makes it faster and more power-efficient. When the clock pulse makes a positive transition, the D input signal is transferred to the Q and Q outputs. Preset and clear are independent of the clock and are achieved by setting a low level on the appropriate input. All inputs and outputs are equipped with static discharge protection circuits, which provide 2KV ESD immunity and transient excess voltage protection.
SN74F174A HEX D-TYPE FLIP-FLOP WITH CLEAR is an integrated circuit chip produced by TI. It contains 6 single-rail output D flip-flops, buffered clock and direct clear inputs, and can be used in buffer/storage registers, shift registers, and pattern generators.
MAX4620/MAX4630/MAX4640 low-voltage, high- ESD-protected, quad, single-pole/single-throw (SPST) analog switches are pin-compatible replacements for the industry-standard 74HC4066 analog switch.
MAX9921 is a hall-effect sensor interface with diagnostic and protection features that interfaces two 2-wire hall-effect sensors to a low-voltage micro-processor (µP). The device supplies and monitors the current drawn by two hall-effect sensors, filters the sensed current level, and outputs the corresponding logic level. The MAX9921 includes input diagnostics and fault protection features that allow the device to determine fault conditions such as open inputs, inputs shorted to the battery, and inputs shorted to ground. If the MAX9921 detects any of these conditions at either IN1 or IN2, the device shuts off the current to the corresponding input. The MAX9921 protects the hall sensors from supply transients up to 60V at the BAT supply. Normal operating supply voltage ranges from 6V to 18V. If the battery voltage is out of range, the MAX9921 shuts off the current to the hall sensors. The MAX9921 provides an 80µs blanking time following hall sensor power-up or restart. The open-drain logic outputs are compatible with logic levels up to 5.5V. The MAX9921 is available in a small 10-pin µMAX® package and is specified over the -40°C to +125°C automotive temperature range.
The MAX9924–MAX9927 variable reluctance (VR or mag- netic coil) sensor interface devices are ideal for position and speed sensing for automotive crankshafts, camshafts, transmission shafts, etc.
The MAX9621 is a dual-wire Hall-effect sensor interface with analog and digital outputs that can interface two 2-wire Hall-effect sensors to low-voltage microprocessors (FP) through a digital output for Hall-effect switches or an analog output for linear information or both.
This document describes an 8-bit flip-flop with 3-state outputs, designed for driving highly capacitive or relatively low-impedance loads. The product is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
CD54HC173 and CD54HCT173 are high speed three-state quad D-type flip-flops fabricated with silicon gate CMOS technol- ogy. They possess the low power consumption of standard CMOS Integrated circuits, and can operate at speeds com- parable to the equivalent low power Schottky devices. The buffered outputs can drive 15 LSTTL loads. The large output drive capability and three-state feature make these parts ide- ally suited for interfacing with bus lines in bus oriented sys- tems.
The LVQ374 is a low voltage octal D-type flip-flop with 3-STATE outputs from Fairchild Semiconductor Corporation. It is ideal for low power/low noise 3.3V applications.
These octal flip-flops are designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
This document is a production data manual for SN54174, SN54175, SN54LS174, SN54LS175, SN54S174, SN54S175, SN74174, SN74175, SN74LS174, SN74LS175, SN74S174, SN74S175 HEX/QUADRUPLE D-TYPE FLIP-FLOPS WITH CLEAR SDLS068A.
MAX3397E is a bidirectional level translator from Infineon. It can translate low voltage ASICs/PLDs logic signals to high voltage system logic signals or vice versa. MAX3397E supports 8Mbps data rate and can be used in cell phones, MP3 players, telecommunications equipment, POS systems, smart card readers and GPS.
The MAX14591 is a dual-channel, bidirectional logic-level translator with the level shifting necessary to allow data transfer in a multivoltage system. It is optimized for the I2C bus and MDIO bus, providing high-speed, open-drain operation.
