Industrial

The MM74HC174 is a 6-bit D-type flip-flop manufactured by Fairchild Semiconductor. It features high noise immunity, low power and speeds comparable to low power Schottky TTL circuits.

The 74ACTQ74 is a dual D-type flip-flop with asynchronous clear and set inputs and complementary outputs. It is positive edge-triggered and has high noise immunity and dynamic threshold performance.

SN54AC574/SN74AC574 is an 8-bit D-type flip-flop with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The device is particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The 74AC175 • 74ACT175 Quad D-Type Flip-Flop is a high-speed quad D-type flip-flop. The device is useful for general flip-flop requirements where clock and clear inputs are common. The information on the D-type inputs is stored during the LOW-to-HIGH clock transition. Both true and complemented outputs of each flip-flop are provided. A Master Reset input resets all flip-flops, independent of the Clock or D-type inputs, when LOW.

The 74F109 is comprised of two high-speed, completely independent JK flip-flops. The JK design allows it to be used as a D-type flip-flop. It has independent clear and set functions.

SN74AC534N is an eight-bit edge-triggered D-type flip-flop produced by Texas Instruments. The device has 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.

The MC10/100EP35 is a higher speed/low voltage version of the EL35 JK flip−flop. The J/K data enters the master portion of the flip−flop when the clock is LOW and is transferred to the slave, and thus the outputs, upon a positive transition of the clock. The reset pin is asynchronous and is activated with a logic HIGH. The 100 Series contains temperature compensation.

This data sheet introduces the features and characteristics of CD54HC175 and CD74HC175 quad high-speed D flip-flops.

The LVT574 and LVTH574 are high-speed, low-power octal D-type flip-flop featuring separate D-type inputs for each flip-flop and 3-STATE outputs for bus-oriented appli- cations.

SN54ALS874B, SN74ALS874B, SN74ALS876A SN74AS874, SN74AS876 DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOPS is a series of products produced by Texas Instruments, with 3-State buffer output, can directly drive bus lines, and has selection of true value logic and asynchronous clear function.

The SN74LV175A is a quadruple D-type flip-flop from TI that operates at a voltage range of 2-5.5 V and supports mixed-mode voltage operation. It also features complementary outputs.

The LVT16374 and LVTH16374 are low voltage 16-bit D-type flip-flops with 3-STATE outputs, designed for bus oriented applications. The device is byte controlled. A buffered clock (CP) and Output Enable (OE) are common to each byte and can be shorted together for full 16-bit operation. The LVTH16374 data inputs include bushold, eliminating the need for external pull-up resistors to hold unused inputs. These flip-flops are designed for low-voltage (3.3V) VCC applications, but with the capability to provide a TTL interface to a 5V environment. The LVT16374 and LVTH16374 are fabricated with an advanced BiCMOS technology to achieve high speed operation similar to 5V ABT while maintaining a low power dissipation.

The MM74HC74A is a dual D-type flip-flop with preset and clear, manufactured by Fairchild Semiconductor Corporation. It has high noise immunity and low power consumption, and can drive 10 LS-TTL loads.

SN54AHC174, SN74AHC174 HEX D-TYPE FLIP-FLOPS WITH CLEAR are TI company's six D-type flip-flops with single-rail outputs. They can be used for buffer/storage registers, shift registers, pattern generators, etc.