Industrial

This document introduces the basic characteristics of the LMD18400 quad high side driver, including output current, voltage, temperature and other protection measures, as well as ON/OFF control, switch status readback and other functions.

µPB1508GV is a 3.0 GHz input divide by 2 prescaler IC for DBS tuner applications. µPB1508GV can make VHF/UHF band PLL frequency synthesizer apply to DBS/ECS tuners. µPB1508GV is a shrink package version of µPB584G so that this small package contributes to reduce the mounting space. µPB1508GV is manufactured using NEC’s high fT NESAT™ IV silicon bipolar process. This process uses silicon nitride passivation film and gold electrodes. These materials can protect chip surface from external pollution and prevent corrosion/migration. Thus, this IC has excellent performance, uniformity and reliability.

This document is a preliminary product information about CS44L11 headphone amplifier released by Cirrus Logic, Inc. in 2005.

Low-voltage adjustable precision shunt regulators

This document introduces the features and characteristics of quartz crystal resonators produced by AEL Crystals Ltd. The products have small size, wide frequency range, high stability and fast delivery.

Vishay Semiconductors VLMK31.. is a high-intensity SMD LED with features such as luminous intensity categorization, compatibility with automatic placement equipment, EIA and ICE standard package. It is compatible with IR reflow, vapor phase, and wave solder processes, and available in 8mm tape. It has low power consumption, non-diffused lens, lead-free and RoHS compliant.

This document is the manual for SANYO 2SA1785 / 2SC4645 products, which introduces the features and characteristics of the products.

DS26C31T/DS26C31M CMOS Quad TRI-STATE® Differential Line Driver is a quad differential line driver designed for digital data transmission over balanced lines, which meets all the requirements of EIA standard RS-422, while retaining the low power characteristics of CMOS.

The VISHAY TSHA440 is a high-speed infrared emitting diode with high radiant power and intensity. It is suitable for high pulse current operation and has high reliability and good spectral matching to Si photodetectors. It is commonly used in infrared remote control and free air transmission systems.

The MAX8620Y micro-power-management integrated circuit (µPMIC) powers low-voltage microprocessors or DSPs in portable devices. The µPMIC includes a high- efficiency step-down DC-DC converter, two low-dropout linear regulators (LDOs), a microprocessor reset output, and power-on/off control logic. This device maintains high efficiency at light loads with a low 115µA supply current, and its miniature TDFN package makes it ideal for portable devices. The MAX8620Y’s step-down DC-DC converter utilizes a proprietary 4MHz hysteretic-PWM control scheme that allows for ultra-small external components. Internal syn- chronous rectification improves efficiency and elimi- nates the external Schottky diode that is required in conventional step-down converters. The output voltage is adjustable from 0.6V to 3.3V, with guaranteed output current up to 500mA. The MAX8620Y’s two LDOs offer low 45µVRMS output noise and a low dropout of only 200mV at 200mA. Each LDO delivers at least 300mA of continuous output cur- rent. The output voltages are pin selectable from 1.8V to 3.3V for flexibility. A microprocessor reset output (RESET) monitors OUT1 and warns the system of impending power loss allow- ing safe shutdown. RESET asserts during power-up, power-down, shutdown, and fault conditions where VOUT1 is below its regulation voltage. Applications Cellular Handsets Smart Phones/PDA Phones PDAs Wireless LAN Microprocessor and DSP Solutions including MSM™, XScale™, ARM™, and OMAP™ Fe

The LPC2109/2119/2129 are based on a 16/32-bit ARM7TDMI-S CPU with real-time emulation and embedded trace support, together with 64/128/256 kB of embedded high-speed flash memory. A 128-bit wide memory interface and a unique accelerator architecture enable 32-bit code execution at maximum clock rate. For critical code size applications, the alternative 16-bit Thumb mode reduces code by more than 30 % with minimal performance penalty. With their compact 64-pin package, low power consumption, various 32-bit timers, 4-channel 10-bit ADC, two advanced CAN channels, PWM channels and 46 fast GPIO lines with up to nine external interrupt pins these microcontrollers are particularly suitable for automotive and industrial control applications, as well as medical systems and fault-tolerant maintenance buses. With a wide range of additional serial communications interfaces, they are also suited for communication gateways and protocol converters as well as many other general-purpose applications.

TCUT1200 is a miniature transmissive optical sensor with phototransistor outputs, released for lead (Pb)-free solder process.

The L4970A is a 10A step-down monolithic power switching regulator that delivers 10A at a voltage that can vary from 5.1 to 40V. It has BCD mixed technology and uses a DMOS output transistor to achieve very high efficiency and very fast switching times. The L4970A has features such as reset and power fail for microprocessors, feed forward line regulation, soft start, limiting current and thermal protection. The device is mounted in a 15-lead multiwatt plastic power package and requires few external components. Its efficient operation at frequencies of up to 500KHz reduces the size and cost of external filter components.

The ISL6269A is a high-performance notebook PWM controller featuring Intersil's Robust Ripple Regulator (R3) technology that delivers truly superior dynamic response to input voltage and output load transients

Vishay Semiconductors LH1502BAC, LH1502BACTR, LH1502BB Dual 1 Form A/B, C Solid State Relay.