Industrial

The VRS51x540 is a low-cost 8-bit microcontroller based on the standard 80C51 microcontroller family architecture. It is pin compatible and can be used as a drop-in replacement for standard 8051 MCUs. The product is aimed at cost-effective applications requiring small amounts of program/data memory coupled with streamlined peripheral support. The VRS51x540 includes 4KB of Flash memory, 128 bytes of RAM, a UART, three 16-bit timers, a Watchdog timer, and power down features. The VRS51x540 is available in 5V (VRS51C540) and 3.3V (VRS51L540) versions in PLCC-44, QFP-44, and DIP-40 packages. The devices operate over the entire industrial temperature range. The Flash memory can be programmed using programmers available from Ramtron or other third-party commercial programmers.

The TLV277x CMOS operational amplifier family combines high slew rate and bandwidth, rail-to-rail output swing, high output drive, and excellent dc precision.

The document describes a CE marked handheld lamp that is certified for explosive gas, vapor, and mist in Zone 1 & 2, and for dust with ignition temperatures over 135°C in Zone 21 and 22. It features an electronic current limited battery with power fail operation and deep discharge protection. The lamp uses a halogen bulb for enhanced light output. The lamp enclosure is made of robust anti-static thermoplastic material with IP66 ingress protection. It is compatible with Wolf C-251HV/LV chargers and has Lloyd’s Register Type Approval. It comes with a detachable shoulder strap.

The AD8021 is an exceptionally high performance, high speed amplifier, designed for 16-bit systems. It features low noise, high speed, low power, low distortion, wide supply range, low price and small packaging.

PI7C8152A is a PCI-to-PCI bridge produced by Pericom. It meets the PCI Local Bus Specification, PCI-to-PCI Bridge Specification and PCI Bus Power Management Interface Specification, supports 3.3V and 5V signaling environments, concurrent primary and secondary bus operations and 66MHz support.

The 2322 59 series is a series of varistors produced by Vishay BCcomponents. The product features include low-β ceramic material and two solid copper leads. It is used for transient suppression.

This is the user manual of SVH-1920 controller.

The IDT54/74FCT827AT/BT/CT/DT and IDT54/74FCT2827AT/BT/CT are high-performance CMOS buffers for military and commercial temperature ranges. They are built using an advanced dual metal CMOS technology and provide high-performance bus interface buffering for wide data/address paths or buses carrying parity. The buffers have NAND-ed output enables for maximum control flexibility and are designed for high-capacitance load drive capability and low-capacitance bus loading. The FCT2827T has balanced output drive with current limiting resistors, reducing ground bounce, undershoot, and the need for external series terminating resistors.

The PE4244 UltraCMOS™ RF Switch is a single +3.0-volt power supply RF switch, with low insertion loss (0.60 dB to 2.0 GHz) and high isolation (39 dB to 1.0 GHz).

BS616LV2013 is a high performance, very low power CMOS Static Random Access Memory organized as 131,072 words by 16 bits and operates from a wide range of 2.4V to 3.6V supply voltage. Advanced CMOS technology and circuit techniques provide both high speed and low power features with a typical CMOS standby current of 0.1uA and maximum access time of 70/100ns in 3V operation. Easy memory expansion is provided by active LOW chip enable(CE), active LOW output enable(OE) and three-state output drivers. The BS616LV2013 has an automatic power down feature, reducing the power consumption significantly when chip is deselected. The BS616LV2013 is available in DICE form, JEDEC standard 44-pin TSOP Type II package , JEDEC standard 48-pin TSOP Type I package and 48-ball BGA package.

The M5M4V64S20ATP-8, -10, -12 is a 4-bank x 4194304-word x 4-bit Synchronous DRAM from Mitsubishi Electric with LVTTL interface. All inputs and outputs are referenced to the rising edge of CLK. The M5M4V64S20ATP achieves very high speed data rate up to 125MHz, and is suitable for main memory or graphic memory in computer systems.

This document introduces the features and characteristics of the LT1086 series products, including 3-terminal adjustable or fixed voltage, 1.5A output current, 1V input-output differential, multiple current levels guaranteed dropout voltage, 0.015% line regulation, 0.1% load regulation, 100% thermal limit functional test,> 75dB ripple rejection, etc.

This document is the datasheet of IDT54/74FCT240/A/C, IDT54/74FCT241/A/C and IDT54/74FCT244/A/C, which introduces the features and characteristics of the products, including functions, pins, packages, speeds, etc.