Industrial

ED2/EF2 series miniature signal relays are NEC's new ultra-low power consumption relays, achieving 50 mW of ultra low power consumption.

The XTR110 is a precision voltage-to-current converter designed for analog signal transmission. It accepts inputs of 0 to 5V or 0 to 10V and can be connected for outputs of 4 to 20mA, 0 to 20mA, 5 to 25mA and many other commonly used ranges.

The MAX1564 is a triple, current-limited USB switch that comes in a compact 16-pin 4mm x 4mm thin QFN package. Each channel meets all IEC specifications for USB ports. The device is capable of supplying up to 1.2A from each output. The MAX1564 has multiple protection features, including thermal shutdown to limit junction temperature in case of a prolonged short or overload condition. Reverse-current protection circuitry blocks current flow from output to input regardless of the switch state. The IC has accurate, user-programmable current-limiting circuitry to protect the input supply against overload. Each output of the MAX1564 has short-circuit protection that latches off the switch when the output is shorted for more than 20ms, thereby saving system power. Auto-restart then tests the shorted output with a 25mA current to determine when the short is removed, then automatically restarts the output. Independent open-drain fault signals notify the microprocessor that the internal current limit has been reached. A 20ms fault-blanking feature allows momentary faults to be ignored, such as those caused when hot-swapping into a capacitive load. This feature helps avoid issuing false alarms to the host system. Blanking also suppresses errant fault signals when the device is powering up.

IRM-H538/TR2 is a miniaturized SMD type infrared remote control system receiver developed and designed by utilizing the most updated IC technology.

The 54ACTQ32 Quiet Series Quad 2-Input OR Gate is a product of NATIONAL SEMICONDUCTOR, which contains four 2-input OR gates and utilizes NSC Quiet Series technology to guarantee quiet output switching and improved dynamic threshold performance. The Quiet Series products also feature GTO output control and undershoot corrector, as well as a split ground bus for superior ACMOS performance.

The 24AA256/24LC256/24FC256 is a 32K x 8 (256 Kbit) Serial Electrically Erasable PROM, capable of operation across a broad voltage range (1.8V to 5.5V) developed by Microchip Technology Inc. for advanced, low-power applications such as personal communications or data acquisition. It has a page write capability of up to 64 bytes of data. It is capable of both random and sequential reads up to the 256K boundary. Functional address lines allow up to eight devices on the same bus, for up to 2 Mbit address space. It is available in the standard 8-pin plastic DIP, SOIC, TSSOP, MSOP and DFN packages.

P1 relay is a 1 pole telecom and signal relay, polarized, through hole type (THT) or surface mount technology (SMT) produced by Telerelay. It has three types of relays: non-latching with 1 coil, latching with 2 coils and latching with 1 coil. It has TTL standard modules directly triggerable, 13.5 x 7.85 mm slim line, 1A switching current, 1 changeover contact (1 form C/SPDT), bifurcated contacts, immersion cleanable and high sensitivity results in low nominal power consumption. It has typical applications including automotive equipment, office equipment, measurement and control equipment, medical equipment and safety equipment.

This datasheet provides information on the features, package, pinout, etc. of Intersil ACS541MS Octal Buffer/Line Driver Three-State

This document describes the features and characteristics of the A29L800A Series 1M x 8 Bit / 512K x 16 Bit CMOS 3.0 Volt-only, Boot Sector Flash Memory.

IDTAS4624 is a low voltage single-pole/double-throw analog switch from IDT, with a working voltage range of 1.8V to 5.5V and a switch resistance of 0.5 ohms (maximum).

Ecliptek will terminate the product E11J1, E13J1 on August 25, 2005, and will not accept new orders.

BAOOT / BAOOFP series Fixed positive output low dropout type, 3-pin positive output voltage regulators