This page provides manuals, user guides, handbooks, specifications, and maintenance instructions for Industrial. View online or download for free. Showing page 3636.
The APW7046 is a power controller that supports three regulated voltage outputs, including VCORE (1.15~1.50V), VMEM (2.40~3.15V) and VTT (1.25V). It adopts a single-loop control design and supports voltage-mode PWM control. The product has excellent output voltage regulation performance and fast transient response. It has built-in feedback compensation function and supports 0%~100% duty ratio control. In addition, the product also integrates over-voltage and over-current fault monitoring functions. The operating frequency is 200kHz and it uses a 24-pin SOIC package. The product is mainly used in mainboard DDR, AGP/PCI graphics card power regulation areas.
The Vishay TFBS6614 is the lowest profile (2.7mm) 4 Mbit/s Infrared Data Transceiver module available. A PIN photodiode, an infrared emitter (IRED) and a low-power CMOS control IC are integrated in a single package that provides a total front-end solution.
This document introduces the CY62128 128K x 8 static RAM's features, including operating voltage, power consumption, and automatic power-down function.
This data sheet describes the product specifications of BTA204S and BTA204M series D, E and F three-quadrant triacs. These devices are suitable for use in active motor control circuits or with other highly inductive loads.
The TCND5000 is a reflective sensor with PIN photodiode output, including an infrared emitter and PIN photodiode, suitable for applications such as proximity sensing, object sensing, motion sensing, and touch keys.
57 Filtered Arrays XD is a surface mount EMI filter that provides an EMI filtered signal line between electronic modules. It has effective insertion loss from 1MHz up to ~ 1GHz. It has three types of XD07, XD06 and XD03, with capacitance range of 33nF ¡ 120nF, 15nF ¡ 68nF and 8.2nF ¡ 39nF, rated voltage of 200VDC and 500VDC.
The LTC6800 is a precision instrumentation amplifier with high CMRR and low input offset voltage. It uses charge balanced sampled data techniques to convert a differential input voltage into a single ended signal, which is then amplified by a zero-drift operational amplifier. The inputs and outputs are both rail-to-rail, making it suitable for applications such as thermocouple amplifiers, electronic scales, medical instrumentation, strain gauge amplifiers, and high resolution data acquisition.
The ADIS16006 is a low cost, low power, complete dual-axis accelerometer with an integrated serial peripheral interface (SPI). An integrated temperature sensor is also available on the SPI interface. The ADIS16006 measures acceleration with a full-scale range, high precision, bandwidth selectable to 1.9 mg resolution at 60 Hz, low power: <2 mA, 3500 g shock survival, 7.2 mm × 7.2 mm × 3.7 mm package.
The LTC3704 is a wide input range, current mode, positive-to-negative DC/DC controller that drives an N-channel power MOSFET and requires very few external components. Intended for low to high power applications, it eliminates the need for a current sense resistor by utilizing the power MOSFET’s on-resistance, thereby maxi- mizing efficiency.
The M48Z512A, M48Z512AY 4 Mbit (512Kb x8) ZEROPOWER SRAM integrates a low power SRAM, a power-fail control circuit and a battery. It supports unlimited write cycles and retains data for 10 years in the absence of power.
This document describes the features and characteristics of the ZMY3V9 to ZMY100 series of voltage stabilizing diodes, which are used in stabilizing and clipping circuits with high power rating. The Zener voltages are graded according to the international E 24 standard, and smaller voltage tolerances are available upon request. These diodes are also available in the DO41 case with the type designation ZPY3V9 to ZPY100.
This document introduces the features and characteristics of the CS5461A single-phase bidirectional power/energy IC product produced by Cirrus Logic, including energy data linearity, power measurement range, accuracy, power consumption, power supply method, working temperature range, and interface type.
The LT1737 is a monolithic switching regulator controller specifically designed for the isolated flyback topology. It drives the gate of an external MOSFET and is generally powered from a DC supply voltage. Output voltage feedback information may be supplied by a variety of methods including a third transformer winding, the primary winding or even direct DC feedback (see Applications Information). Its gate drive capability, coupled with a suitable external MOSFET and other power path components, can deliver load power up to tens of Watts. The LT1737 has a number of features not found on other isolated flyback controller ICs. By utilizing current mode switching techniques, it provides excellent AC and DC line regulation. Its unique control circuitry can maintain regulation well into discontinuous mode in most applications. Optional load compensation circuitry allows for improved load regulation. An optional undervoltage lockout pin halts operation when the application input voltage is too low. An optional external capacitor implements a soft-start function.
The EF series high power MOSFETs are Infineon's single chip integrated power controller series products, which can achieve high conversion efficiency, high power density and high reliability. They are suitable for various industrial applications.
