Industrial

M29F102BB is a single-supply flash memory supporting 1Mbit (64Kb x16, boot block), with the following features: Single 5V ±10% supply voltage for program, erase and read operations; 35ns access time; 8µs program time per word typical; 5 memory blocks, 1 boot block (bottom location), 2 parameter and 2 main blocks; embedded word program algorithm, embedded multi-block/chip erase algorithm, status register polling and toggle bits; erase suspend and resume modes, read and program another block during erase suspend; unlock bypass program command, faster production/batch programming; temporary block unprotection mode; standby and automatic standby, each block supports 100,000 program/erase cycles; M28F102 compatible, pin-out and read mode; 20 years of data retention, defect rate below 1ppm/year; electronic signature, manufacturer code 0020h, bottom device code M29F102BB 0097h; compliant with lead-free soldering processes, lead-free versions.

The document describes the features and characteristics of the M28C16 16K (2K x 8) parallel EEPROM, including fast access time, low power consumption, fast write cycle, and data protection.

TMS320C6211 and TMS320C6211B are excellent price/performance digital signal processors (DSPs) with eight 32-bit instructions per cycle, clock rates of 150MHz and 167MHz, instruction cycle times of 6.7ns and 6ns, and performance of 1200 and 1333 MIPS.

This document introduces the RV5VG1×××series lithium-ion cell protectors. These products have low supply current, high accuracy detector threshold, variety of detector threshold, built-in protection circuit, adjustable short protection voltage, adjustable sensing delay, and small package.

The PDF file introduces the temperature dependence of the RTO-A model MANGANIN resistors. The file also provides the power derating curve for Widerstände. The product features 50 watts of continuous power and a SOT 227B (ISOTOP) compatible outline.

HYB 3164800AJ/AT(L) -40/-50/-60 is a 64 MBit dynamic RAM organized as 8,388,608 by 8 bits. The device is fabricated in an advanced second generation process and features low power, high performance, low voltage and high reliability.

1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)

Thermtrol Thermal DF Series Thermal Cutoffs are single action devices that open when a preset temperature is reached. The DF Series is the right choice for applications requiring an inexpensive limit protector with 15A capability.

The TLV247x series are low power, high performance, CMOS operational amplifiers that offer 2.8 MHz of gain-bandwidth product, input bias current of only 2.5 pA, and output drive capability up to ±35 mA.

RS401L to RS407L is a bridge rectifier with a working voltage range of 50 to 1000 volts. It features low leakage and low forward voltage. It can be used in any mounting position and has silver plated copper leads and a surge overload rating of 200 amps.

The MK3807-01 is a low skew 3.3V, 1 to 10 fanout buffer. The large fanout from a single input line reduces loading on the input clock. The TTL level outputs reduce noise levels on the part. Typical applications are clock and signal distribution.

HT6221/HT6222 Multi-Purpose Encoders are CMOS LSI encoders designed for use in remote control systems. They are capable of encoding 16-bit address codes and 8-bit data codes. Each address/data input can be set to one of the two logic states, 0 and 1. The HT6221/HT6222 contain 32 keys (K1~K32) and 64 keys (K1~K64), respectively. When one of the keys is triggered, the programmed address/data is transmitted together with the header bits via an IR (38kHz carrier) transmission medium.

HT1626 is a peripheral device specially designed for I/O type MCUs to expand the display capability. The device has a maximum display segment of 768 patterns (48 * 16). It also supports serial interface, buzzer sound, Watchdog Timer or time base timer functions. The HT1626 is a memory mapping and multi-function LCD controller. The software configuration feature of the HT1626 makes it suitable for multiple LCD applications including LCD modules and display subsystems. Only three lines are required for the interface between the MCU and the LCD controller.

TLE202x, TLE202xA, TLE202xB, TLE202xY are the new generation of precision, high-speed, low-power operational amplifiers using the Texas Instruments Excalibur process.