Key facts
- Manuals
- 533
- Models
- 165
- Categories
- 3
- Languages
- EN
- Last added
- 2026-10-01
Atmel models by category
Featured Atmel manuals
Atmel ATSAMR21ZLL-EK Evaluation Kit User Guide
This guide introduces the ATSAMR21ZLL‑EK evaluation kit, a hardware platform based on the Atmel ATSAMR21G18A microcontroller. It describes the kit’s features such as antenna diversity, RGB LED, OLED display, joystick, and various interfaces, and explains how the board integrates with Atmel Studio and BitCloud ZigBee® PRO libraries.
The document covers getting started with a quick‑start procedure, power‑supply options (EDBG USB, MCU USB, battery, external VCC), connector pin‑outs, and detailed information on peripherals including the crystal, RF interface, touch interface, RGB LED, OLED display, serial flash, temperature sensor, crypto authentication, and serial communication interfaces. It also includes certification information, revision history, and legal notices.
Covers: Preface · Features · Kit Overview · Getting Started · Power Supply · Connectors
Atmel ATtiny10 Single Key Configurator User Guide
This guide describes the Single Key Configurator Tool that configures ATtiny10 devices for single‑touch key applications. It covers the three operation modes—On/Off, Toggle, and Debug—and provides details on QTouch and QTouchADC acquisition methods.
The document also explains how to set sensor parameters, generate a binary .hex file, and program the ATtiny10. Appendices cover the debug output format and revision history.
Covers: Single Key Configurator Tool · On/Off Mode · Toggle Mode · Debug Mode · QTouch Parameters · Product Features
Atmel ATmega8-16PU Datasheet
The ATmega8-16PU is an 8‑bit AVR microcontroller with a 16 MHz maximum clock speed. It offers 8 KB of flash program memory, 512 Bytes of EEPROM, and 1 KB of SRAM, packaged in a 28‑pin PDIP. The core architecture follows the AVR RISC design and supports up to 23 general‑purpose I/O pins.
The device includes a range of peripherals such as SPI, TWI (I²C), UART/USART, three timers, and a 6‑channel 10‑bit ADC. It operates from a supply voltage of 4.5 V to 5.5 V and incorporates brown‑out detection, power‑on reset, PWM, and a watchdog timer for robust embedded applications.
Covers: Processor Specifications · Memory Overview · Electrical Characteristics · Peripheral Features · Package and Pin Configuration · Operating Temperature
Atmel TSC695 EDAC Testing Application Note
The document describes the EDAC (Error Detection And Correction) feature of the TSC695 SPARC® 32‑bit Space Processor and provides a procedure for injecting both single‑bit and multiple‑bit errors to verify trap handling. It outlines the hardware implementation, including the 32‑bit data bus, parity generation, and a 7‑bit Hamming code that together form a 40‑bit word.
Testing is performed via the processor's test control register (TSTCTR). By setting the ‘et’ bit and writing a custom check‑bit value, users can force correctable or uncorrectable errors, observe the resulting traps (0x01, 0x09, 0x16), and validate the EDAC response. Code samples illustrate how to enable testing, inject errors, and read back results.
Covers: EDAC Testing Overview · Testing Restriction · Insertion of Error in Data Field · Insertion of Error in Checkbit Field · Trap Handlers · Testing Procedure
Latest Atmel manuals
Atmel ATSAMR21ZLL-EK Evaluation Kit User Guide
User Manual 20 pages · 3.2 MB · ENThe Atmel ATSAMR21ZLL‑EK Evaluation Kit User Guide provides hardware overview, power options, connectors, and peripheral details for development.
Atmel ATtiny10 Single Key Configurator User Guide
User Manual 25 pages · 3.2 MB · ENThe Atmel ATtiny10 Single Key Configurator User Guide explains the tool’s operation modes, QTouch parameters, and how to generate and program the .hex file.
Atmel ATmega8-16PU Datasheet
Datasheet 3 pages · 283 KB · ENThe ATmega8-16PU datasheet provides specifications for the 8‑bit AVR microcontroller, including memory sizes, operating voltage, and peripheral features.
Atmel TSC695 EDAC Testing Application Note
Application Note 8 pages · 78 KB · ENThis Atmel application note explains how to test the TSC695 processor's EDAC trap mechanism using single and multiple error injection.
Atmel SAMC2x/D2x ClassB Library User Manual
User Manual 41 pages · 1.2 MB · ENThe Atmel SAMC2x/D2x ClassB Library User Manual describes the library architecture, API functions, test configurations, and usage guidelines.
Atmel ATtiny24/44/84 8-bit AVR Microcontroller Datasheet
Datasheet 196 pages · 6 MB · ENTechnical datasheet for the Atmel ATtiny24/44/84 8‑bit AVR microcontroller, covering features, specifications, pinout and electrical characteristics.
Atmel AT28C16 Datasheet
Datasheet 12 pages · 174 KB · ENThe AT28C16 is a 16‑Kbit parallel EEPROM with 150 ns read access, low power consumption, and multiple package options.
Atmel ATmega640/1280/1281/2560/2561 8-bit Microcontroller Datasheet
Datasheet 435 pages · 8.4 MB · ENThe Atmel ATmega640/1280/1281/2560/2561 datasheet details features, pin configurations, memory sizes, and electrical characteristics of the 8‑bit…
Atmel ATmega8(L) 8-bit Microcontroller Datasheet
Datasheet 331 pages · 6.3 MB · ENThe Atmel ATmega8(L) 8-bit microcontroller datasheet provides features, pin configurations, electrical characteristics, and memory specifications.
Atmel AT89STK-06 CAN Starter Kit Software Demonstration Guide
Programming Manual 19 pages · 464 KB · ENGuide for setting up and running the AT89STK-06 CAN Starter Kit demo programs using FLIP and required hardware.
ATMEL TS68882 handbook
The document introduces the features of the FX6805 floating-point calculator.
ATMEL TS68332 handbook
The TS68332 is a 32-bit microcontroller that features low power and has a special STOP mode. It operates at 5V±10% supply and 20.97MHz, which is software programmable at 5V±5%. The device uses 1µ high density complementary metal oxide semiconductor (HCMOS) static design and 132-pin ceramic lead chip carrier (CERQUAD) and 132-pin ceramic pin grid array (PGA) package.
ATMEL TS68332 handbook(2)
TS68332 is a low-power 32-bit microcontroller, running at 16.78MHz, working voltage is 5V±10%, using 1µHCMOS process, using static design.
ATMEL TS68332 handbook(1)
ATMEL TS68302 handbook(1)
This document is a technical manual for the TS68000/TS68008 processor, which supports 16-bit or 8-bit, and has an independent direct memory access controller, interrupt controller, parallel input/output ports, 1152 bytes of usable dual-port random-access memory, three timers, including a watchdog timer, four programmable chip-select lines with wait-state logic, programmable address mapping of dual-port RAM and IMP registers, on-chip clock generator with an output clock signal, system control register, bus arbitration logic with low interrupt latency support hardware watchdog for monitoring bus activity, low power (standby) modes, disable CPU logic (TS68000), freeze control for debugging selected on-chip peripherals, DRAM refresh controller.
Which document do I need?
User Manual
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
Application Note
How to use the product for one specific task, with worked examples.
Programming Manual
Instruction set, parameters and examples for configuring or programming the device.
Questions answered in Atmel manuals
How can I power the ATSAMR21ZLL‑EK kit?
The kit can be powered via EDBG USB, MCU USB, a battery header (1.8 V‑4.5 V), an external supply (1.62 V‑3.63 V), or the EXT VCC header when other supplies are not present.
What devices are supported by the Single Key Configurator Tool?
The tool is designed to support ATtiny10 devices only.
How can I generate the configuration file for the ATtiny10?
The tool can generate a binary .hex file that you program into the ATtiny10 device.
How many I/O pins does the ATmega8-16PU provide?
It provides 23 general‑purpose I/O pins.
What is the maximum clock frequency of the ATmega8-16PU?
The microcontroller can run up to 16 MHz.
Which traps indicate uncorrectable errors?
Trap 0x01 is generated for an uncorrectable error during instruction fetch, and trap 0x09 for an uncorrectable error during data access.