Philips manuals, page 38
Philips Semiconductors Addressable relay driver NE/SA5090 handbook
The NE/SA5090 addressable relay driver is a high-current latched driver, similar in function to the 9934 address decoder. The device has 8 open-collector Darlington power outputs, each capable of 150mA load current. The outputs are turned on or off by respectively loading a logic “1” or logic “0” into the device data input. The required output is defined by a 3-bit address. The device must be enabled by a CE input line which also serves the function of further address decoding. A common clear input, CLR, turns all outputs off when a logic “0” is applied. The device is packaged in a 16-pin plastic or Cerdip package.
Philips Semiconductors NE5081 handbook
Philips Semiconductors NE5080 handbook
This document describes the features and characteristics of the NE5080 supplier.
Philips Semiconductors Power line modem NE5050 handbook
Philips Semiconductors 6-Bit A/D converter (parallel outputs) NE5037handbook
The NE5037 is a low cost, complete successive-approximation analog-to-digital (A/D) converter, fabricated using Bipolar/I2L technology. With an external reference voltage, the NE5037 will accept input voltages between 0V and VREF. An external START pulse of at least 300ns in duration will provide the 6-bit result of the conversion in parallel format. Full conversion with no missing codes occurs in 9µs.
Philips Semiconductors 10-Bit P-compatible D/A converter NE5020 handbook
NE5020 is a microprocessor-compatible monolithic 10-bit digital-to-analog converter subsystem. This device offers 10-bit resolution and ±0.1% accuracy and monotonicity guaranteed over full operating temperature range. Low loading latches, adjustable logic thresholds, and addressing capability allow the NE5020 to directly interface with most microprocessor- and logic-controlled systems. The NE5020 contains internal voltage reference, DAC switches and resistor ladder. Also, the input buffer and output summing amplifier are included. In addition, the matched application resistors for scaling either unipolar or bipolar output values are included on a single monolithic chip. The result is a near minimum component count 10-bit resolution DAC system.
Philips Semiconductors 8-Bit p-compatible D/A converter NE/SE5018/5019 handbook
The NE/SE5018/19 is a complete 8-bit digital-to-analog converter subsystem with features such as input latches and low-loading data inputs.
Philips Semiconductors 8-Bit high-speed multiplying D/A converter DAC08 Series handbook
The DAC08 series is an 8-bit monolithic multiplying Digital-to-Analog Converter that provides very high-speed performance, low cost, and outstanding applications flexibility. Advanced circuit design achieves 70ns settling times with very low glitch and at low power consumption. Monotonic multiplying performance is attained over a wide 20-to-1 reference current range. Matching to within 1 LSB between reference and full-scale currents eliminates the need for full-scale trimming in most applications. Direct interface to all popular logic families with full noise immunity is provided by the high swing, adjustable threshold logic inputs. Dual complementary outputs are provided, increasing versatility and enabling differential operation to effectively double the peak-to-peak output swing. True high voltage compliance outputs allow direct output voltage conversion and eliminate output op amps in many applications. All DAC08 series models guarantee full 8-bit monotonicity and linearities as tight as 0.1% over the entire operating temperature range. Device performance is essentially unchanged over the ±4.5V to ±18V power supply range, with 37mW power consumption attainable at ±5V supplies. The compact size and low power consumption make the DAC08 attractive for portable and military aerospace applications.
PHILIPS 74F74 handbook
The 74F74 is a dual positive edge-triggered D-type flip-flop featuring individual data, clock, set, and reset inputs; also true and complementary outputs.
PHILIPS 74F776 handbook
this datasheet introduces the features and characteristics of the philips 74f776 pi-bus transceiver
PHILIPS 74F657 handbook
This document introduces an octal transceiver named 74F657, which has the function of an 8-bit parity generator/checker. It combines the functions of 74F245 and 74F280A, and is suitable for applications that require high output drive and light bus loading.
PHILIPS 74F656A handbook
This document is the datasheet of 74F655A and 74F656A. 74F655A and 74F656A are octal buffers and line drivers with parity generation/checking functions, designed to be employed as memory address drivers, clock drivers, I/O buffers and other applications.
PHILIPS 74F651A/74F652A Transceivers/registers handbook
74F651A/74F652A are bus transceiver circuits with 3-State outputs, D-type flip-flops, and control circuitry arranged for multiplexed transmission of data directly from the input bus or the internal registers. The devices combine 74F245 and two 74F374 type functions in one chip, and have high impedance base inputs for reduced loading (70µA in high and low states). They also feature independent registers for A and B buses, multiplexed real-time and stored data, and choice of non-inverting and inverting data paths.
PHILIPS 74F50729 Synchronizing dual D-type flip-flop with edge-triggered set reset with metastable immune characteristics handbook
This file is the product specification of 74F50729 produced by Philips Semiconductors. It is a dual positive edge-triggered D-type flip-flop with edge-triggered set and reset and metastable immune characteristics. The product has a skew of less than 1.5 ns, high source current (IOH = 15mA), and is ideal for clock driver applications.
PHILIPS 74F50728 Synchronizing cascaded dual positive edge-triggered D-type flip-flop handbook
74F50728 is a synchronizing cascaded dual positive edge-triggered D-type flip-flop