Philips manuals, page 110
philips 74AUC1G08 Single 2-input AND gate handbook
This document is a specification sheet for the 74AUC1G08 single 2-input AND gate. The product features a wide voltage range, high noise immunity, and low power consumption.
philips 74HC1G08 74HCT1G08 2-input AND gate handbook
The 74HC1G08/74HCT1G08 is a high-speed Si-gate CMOS device that provides the 2-input AND function. It has a wide supply voltage range (2.0 to 6.0 V), high noise immunity, low power dissipation, balanced propagation delays and a very small 5-pin package.
PHILIPS PEMB4 PNP resistor-equipped double transistor R1 = 10 k R2 = open handbook
PEMB4 is a PNP double transistor produced by Philips Semiconductors. The features are 300mW total power dissipation, 1.6mm × 1.2mm × 0.55mm ultra-thin package, excellent coplanarity, reduced number of components, saved board space, and reduced pick and place costs
PHILIPS SAA7124; SAA7125 Digital Video Encoder (ECO-DENC) handbook
This is a preliminary specification file for Philips SAA7124 and SAA7125 digital video encoders (ECO-DENC).
PHILIPS PCF8831 STN RGB - 160 output row driver handbook
The PCF8831 is a row driver for driving colour STN displays manufactured by Philips Semiconductors.
PHILIPS 74HC/HCT221 Dual non-retriggerable monostable multivibrator with reset handbook
The document describes the 74HC/HCT221 dual non-retriggerable monostable multivibrator with reset. The pulse width variance is typically less than ± 5%. The pin-out is identical to '123'. Overriding reset terminates the output pulse. The nB inputs have hysteresis for improved noise immunity. Output capability is standard (except for nREXT/CEXT). ICC category: MSI.
PHILIPS TJA1041A handbook
The TJA1041A is a high speed CAN transceiver from Philips Semiconductors. It is fully compatible with the ISO 11898 standard and supports communication speeds up to 1 Mbit/s. The device also has very low ElectroMagnetic Emission (EME), automatic I/O-level adaptation to the host controller supply voltage, passive behavior, and recessive bus DC voltage stabilization. It also supports a listen-only mode for node diagnosis and failure containment.
PHILIPS 74HC/HCT374 handbook
The 74HC/HCT374 is a high-performance Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). It is specified in compliance with JEDEC standard no. 7A. The 74HC/HCT374 is an octal D-type flip-flop that features separate D-type inputs for each flip-flop and 3-state outputs for bus oriented applications. A clock (CP) and an output enable (OE) input are common to all flip-flops. The 8 flip-flops will store the state of their individual D-inputs that meet the set-up and hold times requirements on the LOW-to-HIGH CP transition. When OE is LOW, the contents of the 8 flip-flops are available at the outputs. When OE is HIGH, the outputs go to the high impedance OFF-state.
PHILIPS FAMILY SPECIFICATIONS handbook
HCMOS 74HC/HCT/HCU family characteristics
PHILIPS Package outline drawings handbook
This is a PDF file, about package outline drawings of Philips Semiconductors products
PHILIPS SAA7182A; SAA7183A Digital Video Encoder (EURO-DENC2) handbook
SAA7182A and SAA7183A are digital video encoders produced by Philips. They feature CMOS 3.3V devices and 5V input circuits, support PAL/NTSC/SECAM decoded data, and accept data on an 8-bit wide input port. In addition, the product also has three DACs for CVBS, Y and C, as well as RGB output.
Philips Semiconductor XA-S3 16-bit microcontroller
This document contains copyright information of the P51XAS30KBBA supplier. Unable to provide product features and characteristics.
PHILIPS TDA4841PS I 2 C-bus autosync deflection controller for PC monitors handbook
This document describes the technical specifications and features of the TDA4841PS integrated circuit, which is an I2C-bus autosync deflection controller for PC monitors.
Philips Semiconductors BYV29X-600 Data Sheet
This document describes the features of Philips Semiconductors' BYV29X-600 ultrafast rectifier diodes, including low forward voltage drop, fast switching, soft recovery characteristic, high thermal cycling performance, and low thermal resistance.
PHILIPS BY9300 series handbook
Fast high-voltage soft-recovery controlled avalanche rectifiers BY9300 series