Key facts
- Manuals
- 277
- Models
- 48
- Categories
- 2
- Languages
- EN · ZH
- Last added
- 2026-10-03
Freescale models by category
Featured Freescale manuals

Freescale TWR-56F8257 & TWR-MC-LV3PH BLDC Motor Control with Hall Sensors Application Note
This application note explains the design of a three‑phase brushless DC (BLDC) motor drive built around the Freescale MC56F8257 digital signal controller and the TWR‑MC‑LV3PH low‑voltage power stage. It covers system description, hardware configuration, software architecture, and the use of the FreeMASTER visualization tool for monitoring and tuning.
Key features include Hall‑sensor based speed‑closed loop control, bidirectional rotation, fault protection (over‑voltage, under‑voltage, over‑current), and a user interface via push‑buttons or the FreeMASTER PC software. The document also provides peripheral configuration details and example code snippets.
Covers: Introduction · System description · System concept · Software design · Speed control · Commutation

Freescale MC9S08DZ60 Series Product Introduction
The MC9S08DZ60 series microcontrollers are 8‑bit HCS08 devices aimed at applications that need CAN networking and on‑chip EEPROM. The series includes four members (DZ60, DZ48, DZ32, DZ16) that share a common architecture while offering different memory sizes and pin counts.
Key features include a 40 MHz HCS08 CPU, up to 60 KB flash, 4 KB RAM, 2 KB EEPROM, multiple low‑power stop and wait modes, a flexible clock system, watchdog and voltage‑monitor protection, and a rich peripheral set (24‑channel 12‑bit ADC, CAN, LIN, SPI, I²C, timers, PWM, RTC, comparators, etc.). The devices are offered in 64‑pin, 48‑pin, and 32‑pin LQFP packages.
Covers: Device Overview · CPU · Memory · Power‑Saving Modes · Clock Sources · System Protection

Freescale MC9S08AC16 Series Microcontroller Datasheet
This datasheet provides detailed technical data for the MC9S08AC16 series of 8‑bit HCS08 microcontrollers, covering features such as CPU speed, memory options, peripheral modules, and package options. It includes information on system architecture, clocking, power management, and safety features.
The document also contains ordering information, mechanical drawings, electrical characteristics, timing specifications, and a comprehensive table of contents that guides designers through each functional block of the device.
Covers: Introduction · Pinout and Connections · Operating Modes · On‑chip Memory · Reset, Interrupt and System Configuration · Parallel Input/Output

Freescale MC9S12ZVL Reference Manual
This reference manual covers the MC9S12ZVL series microcontroller, describing its safety‑related design built to the ISO26262 standard and providing complete module information except the S12Z CPU. It includes sections on device overview, peripheral modules, electrical specifications, and programming details.
The document is organized into chapters for each hardware block such as ports, memory mapping, debug controller, interrupt controller, ADC, timers, PWM, serial interfaces, LIN PHY, flash memories, and power management, followed by an appendix with electrical specifications.
Covers: Device Overview · Port Integrated Module · Memory Mapping Control · Background Debug Controller · Interrupt Module · DebugLite Module
Latest Freescale manuals
Freescale TWR-56F8257 & TWR-MC-LV3PH BLDC Motor Control with Hall Sensors Application Note
Other 28 pages · 2.1 MB · ENApplication note describing a three‑phase BLDC motor drive using Freescale TWR‑56F8257 and TWR‑MC‑LV3PH boards with Hall‑sensor speed control.
Freescale MC9S08DZ60 Series Product Introduction
Datasheet 365 pages · 6 MB · ENFreescale's MC9S08DZ60 series product introduction provides features, specifications, and pinout details for the MC9S08DZ60, DZ48, DZ32, and DZ16…
Freescale MC9S08AC16 Series Microcontroller Datasheet
Datasheet 296 pages · 5.4 MB · ENTechnical specifications for the Freescale MC9S08AC16 series 8‑bit microcontrollers.
Freescale MC9S12ZVL Reference Manual
Programming Manual 144 pages · 2.1 MB · ENThe Freescale MC9S12ZVL Reference Manual provides detailed information on the microcontroller’s features, architecture, modules, and operation.
Freescale MCF51AG128 Three-phase BLDC Motor Control Design Solution
Application Note 42 pages · 3.3 MB · ZHThis document presents a design solution using the Freescale MCF51AG128 MCU for three‑phase BLDC motor control, detailing its integrated features and…
Freescale MPC8568E PowerQUICC III Processor Datasheet
Datasheet 2 pages · 255 KB · ENThe Freescale MPC8568E PowerQUICC III processor datasheet details its high‑performance e500 core, integrated memory controller, security engine, and…
Freescale SC116009 Series Microcontroller Datasheet
Datasheet 258 pages · 5.7 MB · ZHTechnical data sheet for the Freescale SC116009 series 8‑bit HCS08 microcontroller.
Freescale ColdFire 32-bit Embedded Systems Book
Other 447 pages · 13 MB · ZHA comprehensive textbook covering hardware and software design for 32‑bit ColdFire microcontrollers with Ethernet, CAN and USB interfaces.
Freescale i.MX 6Quad/6Dual/6DualLite/6Solo DDR3 Layout Guide
Application Note 23 pages · 3.6 MB · ZHThis guide provides DDR3 layout and routing recommendations for i.MX 6Quad, 6Dual, 6DualLite, and 6Solo processors.
Freescale Kinetis KL17 Microcontroller Data Sheet
Datasheet 68 pages · 1010 KB · ENTechnical data sheet for the Freescale Kinetis KL17 microcontroller featuring a 48 MHz Cortex‑M0+ core, up to 256 KB flash and low‑power operation.
Freescale TRK-S12VR-WLFT Window Lift and Relay-Based DC Motor Control Hardware Reference Design
Application Note 2 pages · 255 KB · ZHThis reference design details a Freescale TRK‑S12VR‑WLFT based window lift and relay‑driven DC motor controller for automotive applications.
freescale MC9S12XDP512 Data Sheet
This datasheet provides the specification of MC9S12XDP512, including pin, voltage, current, package, working temperature etc.
freescale MC9S12XDP512 Data Sheet(11)
This document is a data sheet for HCS12X microcontrollers, covering the S12XD, S12XB, and S12XA families. It provides the most up-to-date information on the features and characteristics of the products.
freescale MC9S12XDP512 Data Sheet(13)
freescale MC9S12XDP512 Data Sheet(9)
This document is a datasheet for HCS12X microcontrollers, covering the S12XD, S12XB, and S12XA families. It describes the features and characteristics of the MC9S12XDP512 model.
Which document do I need?
Datasheet
Ratings, dimensions and ordering codes, for selection and design work.
Programming Manual
Instruction set, parameters and examples for configuring or programming the device.
Application Note
How to use the product for one specific task, with worked examples.
Questions answered in Freescale manuals
What is the maximum on‑chip flash memory available?
The MC9S08AC16 series provides up to 16 KB of on‑chip flash memory.
How many general‑purpose I/O pins does the device support?
The microcontroller supports up to 38 general‑purpose I/O pins.
What safety standard does the MC9S12ZVL series follow?
It is designed for safety‑related systems using the ISO26262 standard.
How many ADC channels are available on the MC9S12ZVL?
The ADC provides up to 10 external channels and 8 internal channels.
What is the operating voltage range of the MCF51AG128?
The MCU operates from 2.7 V to 5.5 V.
From: Freescale MCF51AG128 Three-phase BLDC Motor Control Design Solution
How much flash memory does the MCF51AG128 provide?
It provides up to 128 KB of flash memory.
From: Freescale MCF51AG128 Three-phase BLDC Motor Control Design Solution
