Key facts
Start here

Micrel KSZ8863MLL/FLL/RLL Evaluation Board User's Guide
This user's guide describes the KSZ8863MLL/FLL/RLL Evaluation Board, which provides a means to evaluate Micrel's third generation fully integrated 3-port switch. The two PHY units of the KSZ8863MLL/RLL support 10BASE-T and 100BASE-TX, while the KSZ8863FLL supports 100BASE-FX. The board gives access to all device pins, with jumpers and interface connectors for quick configuration and re-configuration.
The guide covers board features and evaluation kit contents, then the hardware description and the three configuration options: strap in mode, EEPROM (I2C master) mode, and SPI slave mode. It also documents feature setting and reserved jumpers, LED indicators, the 10/100 Ethernet PHY ports, the 100FX fiber port, and MII/RMII port configuration. A USB port on the board, together with Micrel software and a PC, is used to reprogram the on-board EEPROM or access the SPI interface.
Micrel KSZ8863 specifications
| Supported switches | KSZ8463, KSZ8863/73, KSZ9566/7 and KSZ9897 equivalents |
|---|---|
| Host connection | MII/RGMII interface to a MAC controller |
| Register access | SPI or I2C rather than MIIM |
| Driver implementation | Linux PHY device with a virtual MDIO bus |
| Driver type | Linux SPI drivers; I2C drivers also available |
Source: Micrel KSZ8463/KSZ8863/KSZ9566/KSZ9897 Switch Usage Guide
All Micrel KSZ8863 documents by type
Instruction set, parameters and examples for configuring or programming the device.
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
Questions answered in these manuals
Which Micrel switches does the guide support?
The supported switches are KSZ8463, KSZ8863/73, KSZ9566/7 and KSZ9897 equivalents.
From: Micrel KSZ8463/KSZ8863/KSZ9566/KSZ9897 Switch Usage Guide
What interface connects the switch to a MAC controller?
The switch is usually connected to a MAC controller through a MII/RGMII interface.
From: Micrel KSZ8463/KSZ8863/KSZ9566/KSZ9897 Switch Usage Guide
How do I start the evaluation board in strap in mode?
Set the board's configuration jumpers to the desired settings and apply power; the KSZ8863MLL/FLL/RLL then acts as a standalone 3-port switch.
From: Micrel KSZ8863MLL/FLL/RLL Evaluation Board User's Guide
What power sources can the board use?
It can be powered by a 5 VDC power supply with JP400 pins 1-2 closed, or by 5 VDC from the USB port with JP400 pins 2-3 closed.
From: Micrel KSZ8863MLL/FLL/RLL Evaluation Board User's Guide
Which Micrel switches are supported by this guide?
The guide covers KSZ8463, KSZ8863/73, KSZ9566/7 and KSZ9897 equivalents.
From: Micrel KSZ8463/KSZ8863/73/KSZ9566/7/KSZ9897 Switch Usage Guide
How is a Micrel switch usually connected to a MAC controller?
It is usually connected through a MII/RGMII interface.
From: Micrel KSZ8463/KSZ8863/73/KSZ9566/7/KSZ9897 Switch Usage Guide
