The ISP1161A1 is a single-chip Universal Serial Bus (USB) Host Controller (HC) and Device Controller (DC), which complies with Universal Serial Bus Specification Rev. 2.0, supporting data transfer at full-speed (12 Mbit/s) and low-speed (1.5 Mbit/s).
ISP1183 is a low-power Universal Serial Bus interface device with DMA. It complies with Universal Serial Bus Specification Rev. 2.0, supporting full-speed data transfer (12 Mbit/s). It provides full-speed USB communication capacity to microcontroller or microprocessor-based systems.
2SK1159, 2SK1160 is a high voltage switching tube produced by Mitsubishi Electric. It has the characteristics of low on-resistance, high switching speed, low drive current and no secondary breakdown. It is suitable for switching regulators, DC-DC converters and motor drivers.
2SK1161, 2SK1162 are N-channel MOSFETs with low on-resistance, high switching speed, low drive current, and no secondary breakdown. They are suitable for switching regulator and DC-DC converter.
2SK1165, 2SK1166 are high voltage, large current N-channel MOSFETs from Toshiba. They are suitable for switching regulators and DC-DC converters. They feature low on-resistance, high switching speed, low drive current and no secondary breakdown.
This document is the user manual for Intel® Chipset Software Installation Utility, which introduces different versions of Intel chipsets and their features and characteristics.
The 74HC/HCT109 is a high-speed Si-gate CMOS device and is pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT109 are dual positive-edge triggered, JK flip-flops with individual J, K inputs, clock (CP) inputs, set (SD) and reset (RD) inputs; also complementary Q and Q outputs. The set and reset are asynchronous active LOW inputs and operate independently of the clock input. The J and K inputs control the state changes of the flip-flops as described in the mode select function table. The J and K inputs must be stable one set-up time prior to the LOW-to-HIGH clock transition for predictable operation. The JK design allows operation as a D-type flip-flop by tying the J and K inputs together
This document describes the features and characteristics of the BZB984 series voltage regulator double diodes, including maximum power dissipation, VZ tolerance, ultra small package, etc. This product is suitable for general regulation functions and ESD and surge protection.
