This manual provides detailed information on the KSZ8863MLL/FLL/RLL evaluation board, including features, specifications, and usage instructions.
This user's guide describes the KSZ8863MLL/FLL/RLL Evaluation Board, which provides a means to evaluate Micrel's third generation fully integrated 3-port switch. The two PHY units of the KSZ8863MLL/RLL support 10BASE-T and 100BASE-TX, while the KSZ8863FLL supports 100BASE-FX. The board gives access to all device pins, with jumpers and interface connectors for quick configuration and re-configuration.
The guide covers board features and evaluation kit contents, then the hardware description and the three configuration options: strap in mode, EEPROM (I2C master) mode, and SPI slave mode. It also documents feature setting and reserved jumpers, LED indicators, the 10/100 Ethernet PHY ports, the 100FX fiber port, and MII/RMII port configuration. A USB port on the board, together with Micrel software and a PC, is used to reprogram the on-board EEPROM or access the SPI interface.
| Ethernet PHY support (KSZ8863MLL/RLL) | 10BASE-T and 100BASE-TX |
|---|---|
| Fiber support (KSZ8863FLL) | 100BASE-FX |
| Ethernet LAN interfaces | Two RJ-45 jacks with isolation magnetics (KSZ8863MLL/RLL) |
| Auto crossover | Auto MDI/MDI-X on the PHY port |
| Memory | On-board EEPROM |
| Power input | 5 VDC universal power supply via power jack |
| Configuration options | Strap in mode, EEPROM mode, SPI mode |
Set the board's configuration jumpers to the desired settings and apply power; the KSZ8863MLL/FLL/RLL then acts as a standalone 3-port switch.
It can be powered by a 5 VDC power supply with JP400 pins 1-2 closed, or by 5 VDC from the USB port with JP400 pins 2-3 closed.
Yes, the EEPROM can be programmed using the USB port from a computer running a WIN 2000/XP environment with the Micrel software.
No, for KSZ8863MLL/RLL the guide states to close pins 5-6 on JP78/JP77 since the device does not support FX mode.