Key facts
Start here

Dell OptiPlex 9010/7010 Mini-Tower Owner's Manual
This document is the official Owner's Manual for the Dell OptiPlex 9010 and 7010 Mini-Tower computers. It provides comprehensive instructions for working on the computer, including safety precautions and procedures for powering it down before opening the case.
The manual details how to remove and install various internal components such as the system board, memory modules, hard drives, optical drives, and the processor. It also covers system configuration, RAID technology setup, diagnostic tools like ePSA, and troubleshooting steps for power LEDs and beep codes.
Dell 7010 Mini-Tower specifications
| Processor type | Intel Core i3, i5, i7, Pentium Dual Core, and Celeron series; Celeron is only available for OptiPlex 7010 |
|---|---|
| Total cache | Up to 8 MB depending on processor type |
| Memory type and speed | DDR3, 1600 MHz |
| DIMM slots | Four for Desktop, Mini-Tower, and Small Form Factor; two for Ultra Small Form Factor |
| Memory capacity | OptiPlex 7010: 2 GB, 4 GB, 6 GB, 8 GB, and 16 GB; OptiPlex 9010: 2 GB, 4 GB, 6 GB, 8 GB, 16 GB, and 32 GB |
| Minimum memory | 2 GB |
| Maximum memory | OptiPlex 7010: 16 GB; OptiPlex 9010: 32 GB |
| Mini PCI Express data width | None for Mini-Tower, Desktop, and Small Form Factor; one 52-pin connector for Ultra Small Form Factor |
| Serial ATA connectors | Mini-Tower: four 7-pin; Desktop: three 7-pin; Small Form Factor: three 7-pin; Ultra Small Form Factor: two 7-pin |
| Memory connectors | Mini-Tower, Desktop, and Small Form Factor: four 240-pin; Ultra Small Form Factor: two 240-pin |
| Internal USB connector | Mini-Tower and Desktop: one 10-pin; Small Form Factor and Ultra Small Form Factor: none |
| System fan connector | One 5-pin connector |
| Front panel control connector | Mini-Tower, Desktop, and Small Form Factor: one 6-pin and two 20-pin; Ultra Small Form Factor: one 14-pin, one 20-pin, and one 10-pin |
| Thermal sensor connector | One 2-pin connector |
| Processor connector | One 1155-pin connector |
| Processor fan connector | One 5-pin connector |
| Service mode jumper | One 2-pin connector |
| Password clear jumper | One 2-pin connector |
| RTC reset jumper | One 2-pin connector |
| Internal speaker connector | One 5-pin connector |
| Intruder connector | One 3-pin connector |
| Power connector | Mini-Tower, Desktop, and Small Form Factor: one 24-pin and one 4-pin; Ultra Small Form Factor: one 8-pin, one 6-pin, and one 4-pin |
All Dell 7010 Mini-Tower documents by type
Day-to-day operation, settings and troubleshooting. Start here if the product is already set up.
- Dell OptiPlex 9010/7010 Mini-Tower Owner's Manual 62 p
- Dell OptiPlex 9010/7010 Mini-Tower User Manual 62 p
- Dell OptiPlex 9010/7010 Mini-Tower Owner's Manual 69 p
- Dell OptiPlex 9010/7010 Mini Tower Desktop User Manual 69 p
- Dell OptiPlex 9010/7010 Mini Tower Owner's Manual 68 p
- Dell OptiPlex 9010/7010 Mini-Tower Owner's Manual 62 p
Questions answered in these manuals
What tools may be required for procedures in this manual?
The procedures may require a small flat-blade screwdriver, a Phillips screwdriver, and a small plastic scribe.
How do you remove the computer cover?
Pull up the cover release latch, then lift the cover upwards to remove it from the computer.
What tools are recommended for removing and installing components?
A small flathead screwdriver, a Phillips screwdriver, and a small plastic scribe.
How do you shut down the computer before disassembly?
Close the operating system, ensure the computer and connected devices are off, and hold the power button for about 6 seconds if they do not turn off automatically.
What tools are recommended for this manual?
The recommended tools are a small minus screwdriver, a Phillips screwdriver, and a small plastic pry tool.
How do I safely ground myself before working inside the computer?
Touch an unpainted metal surface, such as the metal on the back of the computer, periodically to discharge static electricity.
